openPR Logo
Press release

Report Explores the Polyethersulfone (PES) Market Latest Trends and Insights by 2027

12-21-2017 01:46 PM CET | Advertising, Media Consulting, Marketing Research

Press release from: Future Market Insights

/ PR Agency: Future Market Insights
Report Explores the Polyethersulfone (PES) Market Latest

Polyethersulfone (PES) Market: Introduction

Polyethersulfone (PES) belongs to the family of thermoplastics polymers which is further classified as sulfone plastic. Polyethersulfone polymers are stable at high temperature and exhibit high toughness. Ability to be high hydrolyzed makes polyethersulfone to finds its applications in medical industry and ability to resist heat makes PES to find its application in Military uses. Polyethersulfone when reinforced with the glass fibers makes the composite to have high strength and Young’s Modulus in comparison to the composite without polyethersulfone reinforcement. In electronics industry Polyethersulfone is used as a dielectric capacitor.

PESU Polyethersulfone membranes are membrane polymers which are used in pharmaceutical and biotechnology industries. Polyethersulfone are stable polymers having broad temperature and pH range. Polyethersulfone membrane scan also be used to remove Clostridia, Salmonella, Mycoplasma reduction, Yeasts and Mammalian cells from liquids. Advantages of using Polyethersulfone are they generate low smoke, exhibit excellent electrical properties at elevated temperatures, transparent, have excellent chemical resistance and are easily machined.

Request for TOC @ https://www.futuremarketinsights.com/toc/rep-gb-5477

Polyethersulfone (PES) Market: Dynamics

Growing demand for high performance engineering plastics across various industries such as Construction industries, aviation industries and automotive industries is expected to drive the Global demand of Polyethersulfone during the forecast period.

Increasing applications of polyethersulfone in dental and medical sector is expected to further drive the consumption. Superior properties such as high thermal resistance and chemical resistance over polyamides and polycarbonates i.e. (thermoplastics) is expected to cause the growth in consumption of Polyethersulfone.

Growing filtration needs in sanitary and food & beverages industry is expected to raise the demand for membranes which in turn is expected to gear up the consumption of Polyethersulfone during the forecast period

High cost of Polyethersulfone compared to other plastics available in market and high cost involved in processing is expected to pose the restraint in the growth of Polyethersulfone market.

Polyethersulfone (PES) Market: Regional Outlook

North America is expected to witness the significant growth in Polyethersulfone market. Due to high growth in automotive industries and medical industries coupled with High per capita consumption is expected to boost the demand of Polyethersulfone during the forecast period

Emerging economies such as China and India and Indonesia in Asia Pacific are expected to witness the substantial growth in Polyethersulfone market. This can be attributed to the increasing expenditure of individuals in Healthcare coupled with growing industries such as automotive, food & beverages and Aerospace etc are expected to accelerate the demand of Polyethersulfone (PES) during the forecast period of time.

Make an Enquiry @ https://www.futuremarketinsights.com/reports/sample/rep-gb-5477

Europe and Middle east & Africa (EMEA) region is expected to witness the growth in Polyethersulfone market due to the presence of growing automotive manufactures in region and increasing expenditure in military sector is expected to spur the Europe Polyethersulfone (PES) market

Latin America is expected to witness the stable growth in Polyethersulfone market which can be attributed to the stable growth in end use industries where Polyethersulfone is used such as Automotive, Medical, Military and Aerospace etc.

About Us

Future Market Insights is the premier provider of market intelligence and consulting services, serving clients in over 150 countries. FMI is headquartered in London, the global financial capital, and has delivery centres in the U.S. and India.

FMI’s research and consulting services help businesses around the globe navigate the challenges in a rapidly evolving marketplace with confidence and clarity. Our customised and syndicated market research reports deliver actionable insights that drive sustainable growth. We continuously track emerging trends and events in a broad range of end industries to ensure our clients prepare for the evolving needs of their consumers.

FMI’s team of over 200 research analysts provides market intelligence at global, regional, and country level. Our analysts are committed to provide independent insights, relying on our cognitive defusion training module, which conditions them to look at data objectively and unbiasedly.

Contact Us

Future Market Insights
616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
United States
T: +1-347-918-3531
F: +1-845-579-5705
Email:sales@futuremarketinsights.com
Web: www.futuremarketinsights.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Report Explores the Polyethersulfone (PES) Market Latest Trends and Insights by 2027 here

News-ID: 872036 • Views: …

More Releases from Future Market Insights

Global Lithium Ion Battery Separator Market Projected to Reach US$ 3,256.7 Million by 2032
Global Lithium Ion Battery Separator Market Projected to Reach US$ 3,256.7 Milli …
The lithium-ion battery separator is a critical component in lithium-ion batteries, responsible for preventing short circuits and ensuring safe and efficient battery performance. It acts as a physical barrier between the positive and negative electrodes, allowing lithium ions to pass through while blocking the flow of electrons. With advancements in separator technology, these separators play a key role in enhancing battery capacity, cycle life, and overall safety in various applications,…
Industrial Drums Market on a Trajectory to Reach US$ 17.6 Billion by 2027, Bolstered by a Robust 7.1% CAGR from 2022
Industrial Drums Market on a Trajectory to Reach US$ 17.6 Billion by 2027, Bolst …
The Industrial Drums Market is experiencing a steady and promising trajectory, with an estimated value of US$ 12.5 billion in 2022, projected to escalate to US$ 17.6 billion by 2027 at a commendable Compound Annual Growth Rate (CAGR) of 7.1%. This growth is substantiated by a 6.6% CAGR in volume during 2022-27, as per Future Market Insights. Anticipated to expand 1.5 times within this period, the market presents alluring prospects for industry…
Supermarkets, Convenience Stores, and Eco-friendly Choices Fuel the Expansion of the Metal Cans Industry, Catering to Health-conscious and Environmentally-aware Consumers
Supermarkets, Convenience Stores, and Eco-friendly Choices Fuel the Expansion of …
The metal cans market is predicted to grow at a CAGR of 5% over the forecast period, according to research by Future Market Insights. The industry's estimated value is expected to increase from US$ 56 Bn in 2023 to US$ 91.1 Bn by 2033. The market for metal cans has been driven by the heightened demand for the product in food and beverages industry. Metal cans helps prolong shelf-life of perishable…
Folding IBCs Market Poised for Growth: Expected to Reach US$ 528 Million by 2027 with a 4.8% CAGR
Folding IBCs Market Poised for Growth: Expected to Reach US$ 528 Million by 2027 …
The folding intermediate bulk containers (IBCs) market is on a growth trajectory, with an estimated value of US$ 418 million in 2022, projected to reach US$ 528 million by 2027, showcasing a Compound Annual Growth Rate (CAGR) of 4.8%. Remarkably, the China folding IBCs market defied initial pandemic-related skepticism and is anticipated to grow by 6.9% year on year in 2022. Despite global challenges, China's folding IBCs market is poised to contribute…

All 5 Releases


More Releases for Polyethersulfone

Polyethersulfone Market Rising Trends, Latest Technologies Research And Future S …
Polyethersulfone (PES) is a sulfone plastic that belongs to the class of thermoplastic polymers. These polymers remain stable at high temperatures and have high rigidity. They have high chemical resistivity, are easy with machine generate less smoke, exhibit excellent electrical properties at high temperature, and are light weight. Polyethersulfone finds applications in printed circuits, safety face shields, machine guards, connectors, and others, owing to the aforementioned properties. Request For Sample Copy…
Polyethersulfone Market: Competitive Dynamics & Global Outlook 2025
LP INFORMATION recently released a research report on the Polyethersulfone market analysis, which studies the Polyethersulfone's industry coverage, current market competitive status, and market outlook and forecast by 2025. Global "Polyethersulfone Market 2020-2025" Research Report categorizes the global Polyethersulfone market by key players, product type, applications and regions,etc. The report also covers the latest industry data, key players analysis, market share, growth rate, opportunities and trends,…
Global Polyethersulfone Market Growth 2020-2025
Coronavirus-Covid 2019 has a significant impact on the global market economy, so it is important to find a correct strategy to deal with it. Our analysis team will track key datasets including Revised Vendor Landscape Mix, Revenue Impact analysis, New opportunities mapping,  Disruptions and New opportunities in the Supply Chain etc. GLOBAL INFO RESEARCH has lately published a new report titled, *Global Polyethersulfone Market 2019 by Manufacturers, Regions, Type and Application, Forecast to 2024*.…
Polyethersulfone Dialyzer Market: Is Covid19 testing the healthcare industry?
The global "polyethersulfone dialyzer market" is likely to gain momentum from the increasing number of health reimbursement facilities for dialysis. According to Fortune Business Insights, in an upcoming report, titled, "Polyethersulfone Dialyzer Market Size, Share and Global Trend By Product Type (Low Permeability Polyethersulfone Dialyzer, High Permeability Polyethersulfone Dialyzer), By Disease Indication (Chronic Kidney Diseases, End-stage Renal Diseases, Diabetes, Hypertension, Renal Failure), By End User (Hospitals, Diagnostic Centers, Specialty Clinics,…
Polyethersulfone (PES) Dialyzers Market to Witness Robust Expansion by 2024
LP INFORMATION offers a latest published report on Polyethersulfone (PES) Dialyzers Market Analysis and Forecast 2019-2024 delivering key insights and providing a competitive advantage to clients through a detailed report. According to this study, over the next five years the Polyethersulfone (PES) Dialyzers market will register a xx% CAGR in terms of revenue, the global market size will reach US$ xx million by 2024, from US$ xx million…
Polyethersulfone (PES) Dialyzers Market to Witness Robust Expansion by 2022
LP INFORMATION offers a latest published report on Polyethersulfone (PES) Dialyzers Market Analysis and Forecast 2019-2024 delivering key insights and providing a competitive advantage to clients through a detailed report. According to this study, over the next five years the Polyethersulfone (PES) Dialyzers market will register a xx% CAGR in terms of revenue, the global market size will reach US$ xx million by 2024, from US$ xx million…