IXYS UK Westcode Introduces a new 2.2kV Distributed Gate Thyristor Available at GD Rectifiers

IXYS UK Westcode’s new fast thyristor with turn-off time of as little as 25μs and current rating 1605A, is symmetrical blocking with Vdrm/Vrrm equal to 2200V and therefore suitable for both voltage and current fed applications.

This new fast thyristor has been introduced to compliment the asymmetric blocking R1700MC device and is based on the same die size, gate geometry and silicon design, however with the option of fully symmetrical blocking voltage up to the maximum available voltage of 2200V.

Westcode’s new device has a competitive current rating of 1605 amperes which represents a significant improvement when compared to previous IXYS UK designs in the same mechanical footprint; with 25% more current rating than the equivalent voltage in the older designs. In common with other recently introduced fast thyristors based on the 56mm die this new device has an improved pilot thyristor design and a redesigned distributed gate geometry for the main thyristor which gives improved gate trigger characteristics and transfer of current from the pilot device while retaining the requirement for high di/dt capability. The 56mm diameter silicon die are bonded to a metal disc to ensure the best steady state and thermal transient performance. The die is encapsulated in fully hermetic 50mm electrode contact diameter ceramic packages, with an industry standard overall diameter of 74mm. Provided the correct thermal conditions are observed, with a repetitive di/dt rating of 1000A/μs the device can be used in applications with repetitive frequency up to 10kHz.

The full symmetrical blocking device is available in five different switching classes at two standard voltage grades, part number designations are as follows: 2000 volt parts are R1605MC20E with tq 25μs, R1605MC20F with tq 30μs, R1605MC20G with tq 35μs, R1605MC20H with tq 40μs and R1605MC20J with tq 50μs; 2200 volts are R1605MC22E with tq 25μs, R1605MC22F with tq 30μs, R1605MC22G with tq 35μs, R1605MC22H with tq 40μs and R1605MC22J with tq 50μs.

Typical applications for this device include: induction power supplies for melting, billet heating and surface treatments; as well as resonant power supplies and pulse switches for applications including high power magnets and lasers.

GD Rectifiers is an official distributor for IXYS UK Westcode, servicing engineers, buyers and procurement specialists with Westcode thyristors, diodes, IGBTs, fuses, heatsinks, capacitors and power assemblies.

For further information on IXYS UK Westcode products click here - http://www.gdrectifiers.co.uk/products/category/shop_by_manufacturer/ixys_uk/

For further information on the new 2.2kV distributed gate thyristor please contact: 01444 243 452 or email: enquiries@gdrectifiers.co.uk.

GD Rectifiers is a Global Manufacturer and Distributor of products, services and solutions to commercial and industrial users of power electronic components.

Established in 1964, GD Rectifiers has over 50 years of extensive experience across a large range of markets, specialising in new and current technologies for industrial power control applications. An extensive product offering has built GD Rectifiers exceptional reputation as the go-to power specialist with innovative experience across: Aviation, Automotive, Rail, Medical, Industrial and Electronics markets.

GD Rectifiers have extensive experience in the rail industry and are RISQS Qualified.

GD Rectifiers is a ISO 9001:2015 registered company that design and develop bespoke power semiconductor assemblies to control voltage, current and frequency for international industrial markets.

GD Rectifiers
Bentley House
2 William Way
Burgess Hill
West Sussex
RH15 9AG

This release was published on openPR.