Press release
Now also ready for climate chambers: Dynamic Measurements with MoveInspect
Detail: MoveInspect with temperature control
MoveInspect is based on a camera bar that is equipped with digital cameras and offered in different versions. The high-end version is able to conduct tests at a frequency of 1000Hz. The system can also be applied for endurance testing as it records the data without any time limit. The results of the dynamic measurements are displayed in a clear and descriptive manner. They may also be exported to external analysis software such as DIADem.
By default, MoveInspect is provided with a rugged camera body suitable for industrial requirements (IP65). For dynamic measurements over large temperature ranges, AICON additionally assembles the MoveInspect cameras with a special body temperature control. It is managed by a central unit and allows for the precise identification of the geometric changes in a temperature range between -25°C to +70°C with an accuracy of up to 10µm. The recorded 3D movements can be shown in the same reference system which permits an easy comparison of the results.
The first climate controlled MoveInspect system is in use at a German vehicle manufacturer. The company makes endurance load tests lasting several days under different environmental conditions.
At the Control exhibition, AICON will show the measuring system in hall 1, booth 1118.
About AICON:
AICON 3D Systems is one of the world leading providers of optical camera based 3D measurement systems. AICON develops and distributes systems for the business areas of inspection and testing including car safety and tube inspection. With AICON’s latest products for automated test and process control, the company enters new worldwide market fields. The majority of AICON’s clients operate in the automotive and aerospace market. Further information about AICON is provided online: www.aicon3d.com.
AICON Press Contact:
AICON 3D Systems GmbH
Jutta Thiel
Biberweg 30C
D-38114 Braunschweig
Tel.: +49 (0)531 – 58 000 70
Fax: +49 (0)531 – 58 000 60
Email: jutta.thiel@aicon.de
www.aicon3d.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Now also ready for climate chambers: Dynamic Measurements with MoveInspect here
News-ID: 69769 • Views: …
More Releases from AICON 3D Systems GmbH
Optimized bending production - New software facilitates daily work
Just in time for the EuroBLECH, AICON 3D Systems launches version 3.1 of the software platform BendingStudio. Especially user-friendliness was revised.
Interconnected work at different workstations becomes even more efficient. The module DATA SERVICE is more transparent: Connections to other workstations are visibly displayed. The user sees network problems immediately and can directly restore the network connection. Furthermore, currently used components are marked in the selection lists. They are displayed in…
New! ProCam wireless: Measure crash vehicles more easily
Fast and easy crash vehicle measurements – a simple task for AICON’s innovative measuring system ProCam. Now, work with ProCam becomes even more convenient, with the new wireless system generation.
ProCam wireless offers total freedom of movement around the vehicle. The user works freely and quickly with the hand-held probe, without disturbing cables. The system is equipped with a high-resolution CMOS camera and fast WLAN data transfer.
Even the ProCam measuring software…
MI.Probe mini – small probe supports breuckmann scanners
Measure a gearbox housing with flange hole patterns, undercuts and hidden measuring points? That is no problem with a breuckmann 3D scanner, even though hidden geometries and bores can be reached only by changing the set-up several times.
A small handheld probe now solves this task much more comfortably: The MI.Probe mini. It was spe-cially developed for measurements with the breuckmann stereoSCAN. Only 15 cm long, the MI.Probe mini identifies all…
AICON’s optical measuring system now with interface to PowerINSPECT
Braunschweig/Germany, 26 April 2011 – As of now AICONs optical measuring system MoveInspect HR will be delivered with a direct interface to Delcam’s analysis software PowerINSPECT.
MoveInspect HR is a portable coordinate measurement machine, consisting of high-resolution digital cameras and the hand-operated MI.Probe. The data are collected by sampling defined measuring points with the probe. In doing so, the system even measures hidden points fast and precisely. In contrast to…
More Releases for MoveInspect
3D Metrology Market key players 2028 : GoM, Jenoptik, KLA-Tencor, Bruker Corpora …
3D Metrology Market – Introduction
With the increasing demand for quality control, virtual simulations, and reverse engineering in the manufacturing industry, there has been a significant rise in the demand for ‘state-of-the-art’ 3D metrology equipment in industries such as aerospace, defense, automotive, construction, power, electronics, etc. Owing to the surging demand of these equipment, sales of 3D metrology surpassed a value of US$ 9 Bn in 2018 and are anticipated to…
AICON’s optical measuring system now with interface to PowerINSPECT
Braunschweig/Germany, 26 April 2011 – As of now AICONs optical measuring system MoveInspect HR will be delivered with a direct interface to Delcam’s analysis software PowerINSPECT.
MoveInspect HR is a portable coordinate measurement machine, consisting of high-resolution digital cameras and the hand-operated MI.Probe. The data are collected by sampling defined measuring points with the probe. In doing so, the system even measures hidden points fast and precisely. In contrast to…
Metrology in the fast lane
Object alignment with MoveInspect HR is much faster than with articulated arms or laser trackers!
Braunschweig, 1 December 2010 – At the EuroMold show which opens its gates today in Frankfurt/Main (Germany), AICON showcases the optical measuring system MoveInspect HR. With immediate effect, this system can be used for the alignment and positioning of objects.
Aligning components or machines is a daily routine both in prototyping and production: In vehicle…
Tactile measurement with AICON’s new MI.Probe
Braunschweig/Germany, 30 April 2010 – Just in time for the beginning of the Control show, AICON launches the unique MI.Probe. It combines extraordinary design with technical finesse – and is easy to handle at the same time.
The MI.Probe works in combination with AICON’s portable coordinate measuring machine MoveInspect. This measuring system uses high resolution digital cameras for data collection. They are either mounted on tripods or on a camera…
MoveInspect Technology – the new modular system for portable CMMs
A separate measuring system for each measuring task - this philosophy is a thing of the past. Today, due to economic reasons, measurement equipment must be applicable in a versatile way. AICON’s answer to this requirement is the new system concept MoveInspect Technology for the measurement of 3D coordinates. MoveInspect Technology will premiere at the EuroMold show in Frankfurt/Main (Germany).
MoveInspect Technology is based on a unique modular system that allows…
