openPR Logo
Press release

Automotive Fuel Tanks Market: Global Industry Analysis and Forecast to 2015 to 2021

Automotive Fuel Tanks Market: Global Industry Analysis

Fuel tank is a storage tank for fuel and a safe container for flammable fluids. In the past, steel fuel tank has been the mainstay for automotive fuel tanks, whereas in the recent scenario, plastic fuel tanks are mostly used by automobile industry. The main factors behind the drop in the steel fuel tanks are permeability, weight, packaging, safety, and cost associated with it. Around 95% of fuel tanks in Europe, 85% in U.S. and 40% in Asia are made of plastic. Some of the major factors contributing to the increasing use of plastic fuel tanks are its resistance to corrosion, light weight and ease of molding into unusual shapes.

A sample of this report is available upon request @ http://www.persistencemarketresearch.com/samples/3548

Plastic high-density polyethylene (HDPE) fuel tanks are made by blow molding and metal (steel or aluminum) fuel tanks are welded from stamped sheets. Blow molding technology is increasingly used as it shows its capacity to obtain very low emissions of fuel. Plastic high-density polyethylene can be converted into complex shapes, allowing the tank to be mounted directly over the rear axle, saving space and improving crash safety. On the other hand, the technology used in metal fuel tank is very good in limiting fuel emissions. In the event of crash or an accident plastic fuel tanks are safer than steel fuel tanks. Unlike metal fuel tanks, many can bend and flatten, rather than tearing, rupturing and spilling gasoline, thereby safely eliminating fuel leakage as a cause of a fire or explosion. Due to the plastic fuel tanks car designers can optimize the space that is available for the fuel tank since they can be produced using very unusual shapes. Plastic can be molded around specific parts. In addition, plastic fuel tanks are corrosion resistant, whereas steel tanks require stainless steel to provide a similar level of corrosion resistance, which also means a greater cost.

On the basis of type automotive fuel tanks market is divided in two broad categories: plastic fuel tank and steel fuel tank. Based on the technology automotive fuel tanks market is divided in three broad segments: Multilayer technology, barrier technology and others.

North America is the largest market for automotive fuel tanks, followed by Europe and Asia Pacific. APAC region is expected to be the fastest growing market in terms of sheer volume. China and India hold the key for future market trends in automotive fuel tanks market owing to large population, increase in living standards due to higher disposable income and high growth rate of automotive industry in these regions. Germany, France and Italy are hub for some of the major automobile manufacturers in Europe where as the U.S. is the largest market in North America.

Some of the major drivers contributing the overall market growth of automotive fuel tanks include high growth rate of automotive industry, government regulation and increase in environment friendly fuel tanks.

To view TOC of this report is available upon request @ http://www.persistencemarketresearch.com/toc/3548

Some of the major companies operating in the automotive fuel tanks market include Kautex Textron GmbH & Co KG, Benteler AG, Fuel System Solutions, Inergy Automotive Systems, Magna International Inc., TI Automotive Ltd., YAPP Automotive Parts Co Ltd, Kongsberg Automotive, Toyoda Gosei Co., Ltd. and Visteon Corporation.

About Us

Persistence Market Research (PMR) is a third-platform research firm. Our research model is a unique collaboration of data analytics and market research methodology to help businesses achieve optimal performance.

To support companies in overcoming complex business challenges, we follow a multi-disciplinary approach. At PMR, we unite various data streams from multi-dimensional sources. By deploying real-time data collection, big data, and customer experience analytics, we deliver business intelligence for organizations of all sizes.

Contact Us
Persistence Market Research
305 Broadway
7th Floor, New York City,
NY 10007, United States,
USA – Canada Toll Free: 800-961-0353
Email: sales@persistencemarketresearch.com
Web: http://www.persistencemarketresearch.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Automotive Fuel Tanks Market: Global Industry Analysis and Forecast to 2015 to 2021 here

News-ID: 527080 • Views:

More Releases from Persistence Market Research

North America Wiring Devices Market Projected to Reach USD 26.46 Billion by 2031
North America Wiring Devices Market Projected to Reach USD 26.46 Billion by 2031
Overview of the North America Wiring Devices Market The North America wiring devices market is poised for steady growth over the forecast period, with its size estimated at US$ 18.96 billion in 2024, projected to reach US$ 26.46 billion by 2031, reflecting a CAGR of 4.9%. The market is witnessing substantial expansion due to increasing urbanization, a rising number of residential and commercial construction projects, and the adoption of energy-efficient and
Global Forged Automotive Components Market Poised for Steady Growth, Projected to Reach US$ 70.7 Billion by 2032
Global Forged Automotive Components Market Poised for Steady Growth, Projected t …
The global forged automotive components market is on a robust growth trajectory, currently valued at approximately US$ 50.3 billion in 2025 and forecasted to expand to US$ 70.7 billion by the end of 2032. This growth represents a compound annual growth rate (CAGR) of 5.0% over the coming decade, driven by increasing automotive production, technological advancements, and evolving consumer preferences toward durable, high-performance vehicle parts. Forged automotive components are critical to
Global Electric Cargo Bike Market Set to Accelerate at 11.9% CAGR, Reaching US$ 2.14 Billion by 2032, Reports Persistence Market Research
Global Electric Cargo Bike Market Set to Accelerate at 11.9% CAGR, Reaching US$ …
The global electric cargo bike market is set to experience substantial growth over the coming decade, with Persistence Market Research (PMR) forecasting a compound annual growth rate (CAGR) of 11.9% from 2023 through 2032. Valued at approximately US$ 800 million in 2021, the market is expected to surge to a projected valuation of US$ 2.14 billion by the end of 2032. Notably, electric cargo bikes accounted for 66.2% of the
Bicycle Bearings Market Set for Steady Growth with 6.5% CAGR Through 2032, Driven by Urbanization and Demographic Trends
Bicycle Bearings Market Set for Steady Growth with 6.5% CAGR Through 2032, Drive …
The global bicycle bearings market is poised for significant expansion over the forecast period of 2025 to 2032, according to the latest report released by Persistence Market Research. Valued at approximately US$ 5.99 billion in 2024, the market is projected to reach US$ 6.35 billion by 2025 and further escalate to nearly US$ 9.86 billion by 2032. This growth trajectory reflects a compound annual growth rate (CAGR) of 6.5%, underscoring

All 5 Releases


More Releases for Automotive

Automotive Grommet Market set for explosive growth: Cooper Standard Automotive, …
According to HTF MI, "Global Automotive Grommet Market: Industry Trends, Share, Size, Growth, Opportunity and Forecast 2024-2030". The Global Automotive Grommet Market is anticipated to grow at a compound annual growth rate (CAGR) of 5.96% from 2024 to 2030, reaching USD 100 Billion in 2024 and USD 150 Billion by 2030. Automotive grommets are protective rings or eyelets made from rubber or plastic, used to protect or cover holes in metal
KSA Automotive Market | KSA Automotive Industry | KSA Automotive Industry Resear …
Saudi Arabia’s automotive market faced a decline in new car sales due to tripling of value-added tax (VAT) rates. Effective in July 1, 2020, Saudi Arabia hiked its VAT from 5% to 15%. Vision 2030 trying to attract foreign investment to kick start Dammam manufacturing city to aid re-exports & fulfill domestic demand Surge in Domestic Manufacturing to gain independence of Imports: With Vision 2030, KSA is trying to gain impendence of
Automotive Fuel Injectors Market: Growing Automotive Sales Fueling Automotive Fu …
Automotive fuel injectors market is likely to grow at a steady pace in the long run, according to a new report by Fact.MR. The demand for automotive fuel injectors continues to remain influenced with a multitude of industry-specific and macroeconomic factors. Significant growth in the automotive sector, coupled with increasing vehicle fleet remain instrumental in driving the demand for automotive fuel injectors worldwide. Fact.MR estimates that the sales of automotive fuel injectors are expected
Global Automotive Safety Market 2019 Worldwide Outlook By Autoliv, Delphi Automo …
Automotive safety systems are designed to comply with the standards and regulations prescribed by government agencies and transport authorities worldwide. Passive safety systems are designed to protect passengers, drivers, and pedestrians during an accident. In terms of region, the global Automotive Passive Safety Systems market can be segmented into North America, Europe, Asia Pacific, and Middle East & Africa. Asia Pacific is likely to hold a prominent share of the global
Global Oil Pump for Automotive Market 2018 Analysis -Bosch,Denso,Aisin Seiki,Del …
According to this study, over the next five years the Oil Pump for Automotive market will register a xx% CAGR in terms of revenue, the global market size will reach US$ xx million by 2023, from US$ xx million in 2017. In particular, this report presents the global market share (sales and revenue) of key companies in Oil Pump for Automotive business. Get Sample Copy of this Report for more Information
Global Automotive Body Welded Assembly Market 2018 - Daesan, Baylis Automotive, …
Accord Market, recently published a detailed market research study focused on the “Automotive Body Welded Assembly Market” across the global, regional and country level. The report provides 360° analysis of “Automotive Body Welded Assembly Market” from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global PP Pipe industry, and estimates the future trend of