openPR Logo
Press release

Maxim seeks ASSET ScanWorks’ embedded instrumentation support

08-19-2008 10:01 PM CET | Media & Telecommunications

Press release from: ASSET InterTech

/ PR Agency: ITPR - Information Travels Public Relations
Maxim joins growing list of instrumentation solutions providers who are choosing ScanWorks’ open tools

Richardson, TX (August 12, 2008) –ASSET® InterTech (asset-intertech.com), the leading supplier of open tools for embedded instrumentation, has announced that its ScanWorks® platform supports unique margining and forensics capabilities through several of Maxim Integrated Products’ (www.maxim-ic.com) system monitor and system manager devices.

ScanWorks can be used with Maxim’s MAX16031/MAX16032 system monitors and MAX16046-MAX16049 system managers through the devices’ IEEE 1149.1 Boundary Scan interface, commonly known as JTAG. One example of a ScanWorks application would be measuring and manipulating voltages so that power supplies on circuit boards and in systems could be functionally validated.

“ScanWorks is powerful in that it can access, automate and analyze embedded instrumentation, such as the voltage margining, embedded in these devices,” said Rick Gould, Executive Director, Business Management, in Maxim’s System and Power Management Business Unit. “Several of our customers requested we seek ScanWorks support. Now, engineers can use our tools during design and ScanWorks throughout the product lifecycle, including design, manufacturing and field service.”

“Maxim now supplies a family of devices which can margin voltages and measure system current, temperature and voltage variations, storing the results,” said Dave Bonnett, technical marketing manager for ASSET. “These capabilities are essential for systems with high-reliability requirements, such as telecom systems, servers and storage.”

ScanWorks® – The Embedded Instrumentation Platform

ASSET, through its ScanWorks platform, is applying its more than two decades of experience as a leading tools supplier for the boundary-scan (IEEE 1149.1 JTAG) market to developing open embedded instrumentation tools. Boundary scan, as a test technology that is embedded into chips and circuit boards, is one of several technologies that can form the basis for an embedded instrumentation toolset.

Sandra Iris Eilenstein
ITPR Information-Travels Public Relations
Stefanusstraße 6a82166 München-Gräfelfing
T. +49 (89) 898 687-20
F. +49 (89) 898 687-21
sandra.eilenstein@information-travels.de
www.information-travels.de

About ASSET InterTech
ASSET provides open embedded instrumentation tools to the electronics industry for design validation, test and debug. ScanWorks, the embedded instrumentation platform, automates, accesses and analyzes embedded instrumentation, allowing users to quickly and easily validate and test semiconductors, circuit boards or entire systems during every phase of a product's life. ASSET’s MicroMaster product line employs CPU emulation technology to perform extensive functional test and diagnostic routines on circuit boards and chips, and to program logic and memory devices in-system at high CPU speeds. ASSET InterTech is located outside of Dallas, TX, at 2201 North Central Expressway, Suite 105, Richardson, TX 75080.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Maxim seeks ASSET ScanWorks’ embedded instrumentation support here

News-ID: 51308 • Views: 1168

More Releases from ASSET InterTech

Strategic relationship with SiliconAid extends ASSET’s ScanWorks platform into …
Strategic relationship with SiliconAid extends ASSET’s ScanWorks platform into chip test and verification Chip debugger will be integrated into ScanWorks®; ASSET to resell IEEE P1687 insertion and verification tools Richardson, TX (November 3, 2009) – ASSET® InterTech (www.asset-intertech.com), the leading supplier of open tools for embedded instrumentation, and SiliconAid Solutions (www.siliconaid.com), Austin, TX., have formed a strategic relationship whereby ASSET will integrate its first integrated circuit (IC) test tool into the ScanWorks®
Cray selects ASSET’s ScanWorks platform for embedded diagnostics in next-gener …
Richardson, TX / Munich (August 19, 2009) – Supercomputer leader Cray Inc. has selected ASSET® InterTech’s ScanWorks® platform for embedded instrumentation as the basis for embedded test solutions critical to Cray’s next-generation supercomputers. ASSET (asset-intertech.com) is the leading supplier of open tools for embedded instrumentation for design validation, test and debug. Cray will collaborate with ASSET and ASSET will deliver embedded test logic intellectual property (IP) that will support high-reliability
Dehne, longtime National Instruments executive, joins ASSET’s Board of Directo …
Richardson, TX / Munich (June 17, 2009) – Tim Dehne, until recently a longtime executive with National Instruments, Inc. (NI), has joined the board of directors of ASSET® InterTech, Inc. (asset-intertech.com), the leading supplier of open tools for embedded instrumentation. Over a career stretching more than 21 years at NI, Mr. Dehne led global marketing, and research and development at the company that had $824 million in revenues in 2008.
ASSET’s ScanWorks for Embedded Boundary Scan offers in-system JTAG test and di …
Embedding ScanWorks in high-availability systems optimizes remote test application and programming Richardson, TX / Munich (February 3, 2009) – The new ScanWorks® for Embedded Boundary Scan from ASSET® InterTech (asset-intertech.com), the leading supplier of open tools for embedded instrumentation, can be easily embedded in high-availability systems where it can apply system-level JTAG (SJTAG) test, diagnostic and programming algorithms. Typically, the ScanWorks for Embedded Boundary Scan intellectual property (IP) will be embedded

All 5 Releases


More Releases for Scan

Bone Densitometry Scan for Osteoporosis & Osteopenia
Global Bone Densitometers Market: Snapshot Of late, the global bone densitometers market has been registering a phenomenal increase in its size and valuation. The significant rise in the pool of patients suffering from arthritis and vitamin D deficiency, supported by the surge in the geriatric population across the world, have influenced this market substantially. The increasing prevalence of osteoporosis in post-menopausal women is also contributing considerably to the growth of
LINE SCAN CAMERA-BlueVision Technologies (BVT)
BlueVision Technologies (BVT) is supplier of high speed line scan camera as commercial products. The company designs, develops & manufacture wide range of Analog Line Scan Cameras standard & Digital Line Scan Cameras. With strong in-house R&D & design efforts, we are happy to introduce wide range of line scan cameras which produces high quality images. Our cameras are actively implemented in variety of applications like Fast moving and High speed
CCD Line Scan Cameras – Line Scan Camera India
Press Release:-New Delhi, India :- Line Scan Camera India is india's No.1 Manufacturer of high speed line scan camera as commercial products. The company designs, develops & manufacture wide range of Analog Line Scan Cameras, Cameralink Line Scan Camera, LVDS Line Scan Camera, GigE Line Scan Camera & Digital Line Scan Cameras. With strong in-house R&D & design efforts, our camera lens are developed with optimal precision techniques &
XJTAG releases boundary scan for Teradyne TestStation
Cambridge, UK, 21 October 2014 — XJTAG, a world leading supplier of boundary scan technology, today announced the release of the XJLink2-CFM and XJLink2-CFMx. The new modules provide Teradyne users with integrated access to XJTAG’s powerful test and programming tools, operating under the control of the TestStation™ test program. With a JTAG solution installed internally to the TestStation In-Circuit Test System, the complexity and recurring cost impact of fixture-based test can
11-04-2010 | Health & Medicine
M-Scan
M-Scan attends BIOEurope 2010
M-Scan will be participating at the annual BIO Europe conference and partnering event, which will be held from 15-17 Nov in Munich. Dr. Jörg Müller will be available for one-to-one meetings to discuss potential projects and cooperations in the area of protein characterisation and other high-end analytical services provided by M-Scan. Being a co-sponsor of the Bio M paviliion M-Scan will also be available for discussions in the "Bio M Beergarden." M-Scan offers
M-SCAN Group Launches New Website
The M-Scan Group launches newly redesigned website coinciding with 30 years in business. The new website has been designed to enhance usability with quick and easy access into M-Scan’s areas of expertise and analytical capabilities. With a fresh appearance and improved navigation, the website offers a comprehensive source of information, including downloadable brochures, videos of M-Scan’s training courses, a full list of scientific publications, recent news and calendar of events.