Automotive NVH Materials Market Size, Share And Trends Report | 2034

Automotive NVH Materials Market Overview:

The global Automotive NVH Materials Market was valued at USD 14.2 Billion in 2025 and is forecast to reach USD 20.4 Billion by 2034, growing at a CAGR of 4.10% during 2026-2034. This growth is driven by increasing vehicle manufacturing, stringent noise regulations, growing consumer demand for quieter rides, transition to electric vehicles, and advancements in lightweight, sustainable acoustic materials.

The automotive NVH materials market growth is expanding rapidly driven by rising demand for improved cabin comfort, noise reduction, and enhanced driving experience across passenger vehicles, light commercial vehicles, and heavy commercial vehicles. Growing adoption in electric vehicles, luxury cars, premium segments, and commercial fleets is accelerating commercial deployment. Advancements in acoustic foams, elastomers, damping sheets, composite materials, bio-based polymers, and integration with lightweight construction technologies are driving product innovation. The growth of electric vehicle adoption, sustainability initiatives, fuel efficiency standards, and affordable soundproofing solutions is boosting mass market adoption. Increasing urbanization and stringent noise pollution regulations further support future global market expansion.

Access Detailed Sample Report:: https://www.imarcgroup.com/automotive-nvh-materials-market/requestsample

Study Assumption Years

• Base Year: 2025
• Historical Years: 2020-2025
• Forecast Years: 2026-2034

Automotive NVH Materials Market Key Takeaways

• Current Market Size (2025): USD 14.2 Billion
• CAGR (2026-2034): 4.10%
• Forecast Period: 2026-2034
• The market is propelled by the growing need for improved noise reduction and vehicle comfort.
• Increasing adoption in electric vehicles is driving specialized NVH solutions.
• Technological advancements such as lightweight composite materials are enhancing performance.
• Expansion into luxury and premium vehicle segments is broadening market horizons.
• Integration of sustainable and recyclable materials presents both opportunities and challenges.

Market Growth Factors

The automotive NVH materials market is significantly driven by the escalating demand for quieter and more comfortable vehicles. As consumer expectations rise, automakers are compelled to integrate advanced NVH materials like acoustic foams, elastomers, and damping sheets to improve cabin insulation, reduce vibrations, and suppress road noise. This emphasis on enhanced driving experience is essential for maintaining competitive positioning in both passenger and commercial vehicle segments. The demand for superior acoustic comfort is expected to sustain market growth throughout the forecast period.

The transition to electric vehicles (EVs) is another major growth factor transforming the market. According to the International Energy Agency, around 14 million new electric cars were registered worldwide in 2023, bringing the total on-road number to 40 million. Electric vehicles, without the masking noise of conventional engines, require improved soundproofing solutions to enhance in-cabin experience, as road noise, wind noise, and other ambient sounds become more noticeable. This shift is compelling manufacturers to develop specialized NVH materials tailored for electric drivetrains, creating significant market opportunities.

Technological advancements and sustainability initiatives are revolutionizing the NVH materials industry. Automakers are increasingly emphasizing lightweight NVH materials to improve fuel efficiency and meet stringent emission standards. According to the Department of Energy, replacing conventional steel materials with lightweight alternatives like polymer composites or carbon fiber can reduce a vehicle's weight by approximately 50%, resulting in reduced fuel consumption. The incorporation of sustainable materials such as recyclable polymers and natural fibers is also gaining momentum, driven by environmental regulations and consumer awareness. These innovations in eco-friendly, durable, and efficient materials are driving product development across the global automotive sector.

Market Segmentation

Product:

• Polyurethane: Leading segment with approximately 34.9% market share in 2025, due to exceptional NVH control attributes, superior sound insulation, lightweight profile, durability, and versatility in manufacturing complex automotive components such as headliners, seats, and panels.

• Mixed Textiles Fibers: Provide effective vibration damping and acoustic absorption.

• Fiber Glass: Offers excellent thermal and acoustic insulation properties.

• Polyester Fiber: Lightweight and cost-effective noise absorption solution.

• NBR (Nitrile Butadiene Rubber): Provides superior vibration isolation and durability.

• Polypropylene: Cost-effective material with good acoustic properties.

• PVC (Polyvinyl Chloride): Versatile material for various NVH applications.

• Textile Materials (Synthetic): Advanced synthetic fabrics for noise control.

• Textile Materials (Cotton): Natural fiber solutions for sustainable applications.

Vehicle Type:

• Passenger Vehicles: Leading segment with approximately 68.5% market share in 2025, driven by growing demand for improved driving experience, quieter cabins, and increased comfort. Rising production of electric and luxury vehicles, which focus heavily on sound insulation and vibration control, further propels this segment. According to industry reports, electrified vehicles represented 42.4% of luxury vehicle retail registrations in September 2023.

• LCV (Light Commercial Vehicles): Require effective NVH solutions for driver comfort and cargo protection.

• HCV (Heavy Commercial Vehicles): Focus on reducing driver fatigue through noise and vibration control.

Application:

• Trunk Module: Noise isolation for cargo compartments and rear sections.

• Floor Module: Critical for reducing road noise and vibration transmission.

• Wheel Arches: Protection against tire noise and road spray.

• Cockpit Module: Leading application segment with approximately 27.9% market share in 2025, due to the necessity for comprehensive noise and vibration control within the vehicle cabin. NVH materials in cockpit modules reduce noise from road, air, and engine sources, significantly improving passenger and driver comfort. This segment's importance is particularly emphasized in electric vehicles where reduced engine noise makes other cabin noises more noticeable.

• Roof Module: Overhead insulation and weather protection.

• Engine Casing: Containment of engine noise and
vibration.

• Bonnet Liners: Hood insulation to reduce engine compartment noise.

Region:

• North America
• Europe
• Asia Pacific
• Latin America
• Middle East and Africa

Regional Insights

Asia Pacific is the leading regional market for automotive NVH materials, holding the largest market share globally with over 40.2% in 2025. The growth is driven by robust vehicle manufacturing and an expanding customer base seeking improved vehicle performance and comfort. According to industry reports, in 2023, Asia Pacific's light vehicle manufacturing reached a record 51.8 million units, representing approximately 10% year-on-year growth. This expansion was propelled by robust production in Japan and China, combined with contributions from India and South Korea. Furthermore, China established itself as the leading vehicle exporter globally in 2023. Key automotive companies are rapidly integrating NVH systems to address both international and regional noise and vibration regulations, further strengthening the region's market leadership.
North America represents a significant market driven by high vehicle production, strict noise pollution standards, and increasing luxury car sales. The United States accounts for 84.90% of the North American market share in 2025.

According to CEIC, vehicle production amounted to over 10.6 million units in the United States in 2023. Additionally, new registrations of over 1.2 million EV units were recorded in 2023, augmenting the need for specialty NVH materials.
Europe's automotive NVH materials market is driven by stringent EU noise and emission standards, alongside the growing EV market. According to ACEA, electric vehicles accounted for 22.7% of new car registrations in the European Union in 2023, increasing the need for enhanced NVH solutions. Germany, as Europe's largest automotive producer, leads the way with investments in lightweight NVH materials and high-performance acoustic insulation.

Recent Developments & News

In June 2024, Uniproducts Ltd., a major NVH components manufacturer in India, announced a partnership with Integral Coach Factory to supply sound insulation parts for India's fastest train project, offering quieter travel environments for passengers.

In May 2024, BASF SE announced a strategic partnership with 3B Fibreglass to improve sustainable production of its Ultramid polyamide, used in the automotive sector for NVH and other critical applications, by leveraging sustainably produced fiber glass.

In May 2024, BASF SE unveiled its new Polyurethane Technical Development Center in India to support market development of polyurethane applications in transportation and other sectors where it is extensively used as an NVH material.

In April 2024, Dow opened its first European MobilityScienceTM Studio in Correggio, Italy, enhancing collaborations with OEMs and Tiers. The facility supports R&D for sustainable mobility solutions, including NVH materials, with acoustic and powertrain testing capabilities.

In April 2024, Celanese introduced Zytel NVH, a structural material designed to reduce specific frequencies for use in electric vehicle motor mounts, minimizing noise, vibration, and harshness in EVs to enhance passenger comfort.

Key Players

• BASF SE
• The DOW Chemical Company
• ExxonMobil
• 3M Company
• Mitsui Chemicals, Inc.
• Sumitomo Riko Company Limited
• Covestro AG
• Celanese Corporation
• Huntsman Corporation
• Lanxess AG
• Borgers AG
• Autoneum
• Henkel
• Sika AG

If you require any specific information that is not covered currently within the scope of the report, we will provide the same as a part of the customization.

Expert Insights Available - Connect With Our Analysts: https://www.imarcgroup.com/request?type=report&id=1149&flag=C

About Us

IMARC Group is a global management consulting firm that helps the world's most ambitious changemakers to create a lasting impact. The company provide a comprehensive suite of market entry and expansion services. IMARC offerings include thorough market assessment, feasibility studies, company incorporation assistance, factory setup support, regulatory approvals and licensing navigation, branding, marketing and sales strategies, competitive landscape and benchmarking analyses, pricing and cost research, and procurement research.

Contact Us
IMARC Group,
134 N 4th St. Brooklyn, NY 11249, USA,
Email: sales@imarcgroup.com,
Tel No: (D) +91 120 433 0800,
United States: +1-201-971-6302

This release was published on openPR.