Press release
How to Check the "Cutting Edge" After a Tungsten Carbide Blades are Made
I. What Tools or equipment Are Used for Inspection?
1. "Extension of the Eyes" - Optical Magnifiers:
Tools: Bench magnifiers, illuminated magnifiers, stereomicroscopes.
What they're for: This is the most common, first-step inspection. Just like using a magnifying glass to examine an antique, it magnifies the cutting edge several times to several dozen times to check for obvious "wounds" on a macro level.
2."Precision Ruler" - Profilometer/Surface Roughness Tester:
Tools: Specialized tool profilometers (with a precision probe).
What they're for: This one is impressive. It doesn't rely on sight. Instead, an ultra-fine probe gently traces along the cutting edge, mapping it out like drawing a map, and generates a precise computer image of the edge's exact shape and smoothness. Whether the rake angle, clearance angle, and edge radius meet the design specifications is revealed instantly.
3. "Super Microscope" - Electron Microscope:
Tools: Scanning Electron Microscope (SEM).
What they're for: Used when you need to "solve a mystery," to find extremely tiny (nanoscale) defects or coating issues. It sees in extreme detail, revealing the microscopic world invisible to ordinary microscopes.
II. What Possible Flaws We should pay attention to?During inspection, just like looking for smudges on a face, focus mainly on these types of "flaws":
1. Chips/Edge Breaks:
They look like: Small, irregular notches on the cutting edge, as if chipped off by a tiny stone. This is the most obvious defect.
Why it is not good: They will leave raised marks or scratches on the workpiece surface during machining and cause the tool itself to degrade rapidly.
2. Micro-chipping/Serrated Edge:
What they are: Under the microscope, the edge appears uneven, like tiny serrations. Less obvious than large chips, but very common.
Why they're bad: Affects cutting sharpness and finish quality, accelerating tool wear.
3. Coating Defects:
They shows: Tools usually have a super-hard coating (like non-stick pan coating). Defects may include peeling, bubbling, uneven color, or incomplete coverage (exposing the yellowish tungsten carbide underneath).
Why they sucks: The coating is the "protective suit." Areas with defects will wear out first, causing the tool to fail prematurely.
4. Uneven Edge/ Burrs:
What they look like: The edge radius or chamfer is uneven-wider in some spots, narrower in others; or there are tiny material overhangs (burrs).
Why it bad: Affects the stability of cutting forces and chip evacuation, reducing machining precision.
5. Cracks:
What they look like: Hairline lines appearing on or near the cutting edge. This is a very dangerous defect.
Why they're bad: Under cutting forces, cracks can easily propagate, leading to sudden tool breakage, which is very hazardous.
About Huaxin: Tungsten Carbide Cemented Slitting Knives Manufacturer
CHENGDU HUAXIN CEMENTED CARBIDE CO.,LTD are a professional supplier and manufacturer of tungsten carbide products, such as carbide insert knives for woodworking, carbide circular knives for tobacco&cigarette filter rods slitting, round knives for corugatted cardboard slitting ,three hole razor blades/slotted blades for packaging, tape, thin film cutting, fiber cutter blades for textile industry etc.
With over 25 years development, our products have been exported to U. S. A, Russia, South America, India, Turkey, Pakistan, Australia, Southeast Asia etc. With excellent quality and competitive prices, Our hard working attitude and responsiveness are approved by our customers. And we would like to establish new business relationships with new customers. Contact us today and you will enjoy benefits of good quality and services from our products!
The high performance tungsten carbide industrial blades products
Image: https://www.huaxincarbide.com/uploads/fiber-cutting-blades.png
Staple fiber cutter blade
Image: https://www.huaxincarbide.com/uploads/Circular-knives-for-cigarette-filter-slitting.png
Circular knives for cigarette filter slitting
Image: https://www.huaxincarbide.com/uploads/%CF%86260X%CF%86158X1.5-8-holes1.png
Circular knives for corrugated packaging industry [https://www.huaxincarbide.com/circular-knives-for-corrugated-packaging-industry-product/]
Image: https://www.huaxincarbide.com/uploads/huaxin-woodworking-carbide-blades.png
Carbide blades for woodworking [https://www.huaxincarbide.com/tungsten-carbide-knives-for-planers/]
Image: https://www.huaxincarbide.com/uploads/3-hole-slotted-double-edege-blades.png
Carbide blades for tape, thin film industry [https://www.huaxincarbide.com/carbide-blades-for-tapethin-film-industry/]
Image: https://www.huaxincarbide.com/uploads/Utility-Knife-Blades.png
utility knife
Custom Service
Huaxin Cemented Carbide manufactures custom tungsten carbide blades, altered standard and standard blanks and preforms, starting from powder through finished ground blanks. Our comprehensive selection of grades and our manufacturing process consistently delivers high-performance, reliable near-net shaped tools that address specialized customer application challenges across diverse industries.
Tailored Solutions for Every Industrycustom-engineered bladesLeading manufacturer of industrial blades
Click to contact for custom industrial knives [https://www.huaxincarbide.com/contact-us/]
Follow us: to get Huaxin's industrial blades products releases
Customer common questions and Huaxin answersWhat is the delivery time?
What is the delivery time for custom-made knives?
What payment methods do you accept?
About custom sizes or specialized blade shapes?
Sample or test blade to ensure compatibilityStorage and Maintenance
Media Contact
Company Name: Chengdu HUAXIN cemented carbide Co., Ltd
Email:Send Email [https://www.abnewswire.com/email_contact_us.php?pr=how-to-check-the-cutting-edge-after-a-tungsten-carbide-blades-are-made]
Country: China
Website: https://www.huaxincarbide.com/
Legal Disclaimer: Information contained on this page is provided by an independent third-party content provider. ABNewswire makes no warranties or responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you are affiliated with this article or have any complaints or copyright issues related to this article and would like it to be removed, please contact retract@swscontact.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release How to Check the "Cutting Edge" After a Tungsten Carbide Blades are Made here
News-ID: 4305979 • Views: …
More Releases from ABNewswire
TrillionAgent Launches AI Agents Marketplace to Support Business Adoption of Art …
Image: https://www.abnewswire.com/upload/2026/02/3a6eb2e849df5fab235affe495f67396.jpg
TrillionAgent [https://trillionagent.com/] has announced the launch of the TrillionAgent AI Agents Marketplace, a platform designed to facilitate the widespread adoption of artificial intelligence into organizational operations.
Founded in late 2025 and headquartered in Miami, Florida, TrillionAgent was established with the sole purpose of facilitating, augmenting and accelerating the economy-wide benefits of the widespread adoption of AI into organizational operations. The company aims to accelerate the economy and society-wide benefits of…
"MOOSEDREAMS" Author Jeffrey Rose Delivers Feel-Good Story That Proves Family Is …
In a world where finding one's place can feel overwhelming, author Jeffrey Rose [https://talesonthego.com/%20] offers readers a heartwarming reminder that home isn't always a destination; it's the connections we build along life's unexpected journeys.
Image: https://www.abnewswire.com/upload/2026/02/ecb69d14be72a48cdfd3633ab223ab34.jpg
Rose's novel "MOOSEDREAMS" follows Mini-Moose, a uniquely small moose born with a full set of antlers, as he embarks on an adventure far from his intended home in Venice, California. After a mix-up at Boston's Logan…
A Cozy Woodland Mystery Celebrating Teamwork, Curiosity, and Moonlit Magic
Detective Foxglove and the Missing Moonlight by the author Chris McGrew is a calming and magical children adventure that is set in the middle of the Maplewood Forest. Charming, mysterious and imaginative, this gorgeous story about a young detective in a lovely woodland encourages the young reader to go on a lightning night adventure with friendship and exploration.
About the Book
When something unusual happens in the night sky, the peaceful rhythm…
Latexwell Delivers Timeless Elegance Through Expert Latex Tailoring and Reliable …
London, UK - Latexwell [https://www.latexwell.co.uk/], an international latex fashion brand dedicated to sophisticated simplicity, announces its refined approach to bespoke latex craftsmanship. While maintaining its four foundational pillars-premium materials, complimentary custom sizing, reliable 20-day global delivery, and seamless logistics-Latexwell emphasizes timeless design and dependable execution over technological complexity, offering discerning customers elegant apparel that prioritizes fit, quality, and consistency.
The Essence of Considered Craftsmanship
"True sophistication emerges from restraint and reliability," states…
More Releases for Carbide
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
Repair of Tungsten Carbide Cemented Carbide Tools?
Repair of Tungsten Carbide Cemented Carbide Tools
After a period of use, a customer's blade has developed some flaws that are affecting production quality and speed. What can be done now?
Can Tungsten Carbide Blades be refurbished if problems occur?
The answer is definitely yes, they can be refurbished. During refurbishment, the following situations may be addressed:
1. Surface Treatment
What surface problems can occur?
Flaws, cracks. Examples: scratches, minor wear, coating peeling.
These issues can be…
