Press release
891-903MHZ/936-948MHZ Cavity Diplexer Factory Built for RX TX Isolation
- rx passband: 891-903mhz with less than or equal to 1db insertion loss
- tx passband: 936-948mhz with less than or equal to 1db insertion loss
- greater than or equal to 65db rejection between bands
- vswr less than or equal to 1.3:1
- handles 10w forward power
- operates from -20 degrees c to +65 degrees c
- black-painted aluminum housing with sma-female connectors
- samples available, competitive factory prices, professional after-sales support.
Image: https://www.keenlion.com/uploads/Cavity-Diplexer-111-300x300.jpg
What is a cavity diplexer?
a cavity diplexer is a passive device that allows simultaneous transmission and reception of signals over a single antenna by separating designated frequency bands. our 891-903mhz/936-948mhz cavity diplexer is engineered to provide exceptional isolation between the rx (891-903mhz) and tx (936-948mhz) bands.
Key technical featuresour cavity diplexer is designed to meet the demanding requirements of Modern communication systems:
- rx center frequency: 897mhz plus-minus 1mhz
- tx center frequency: 942mhz plus-minus 1mhz
- insertion loss: less than or equal to 1db across both bands
- voltage standing wave ratio (vswr): less than or equal to 1.3:1
- rejection: greater than or equal to 65db between bands
- impedance: 50 ohms
- connectors: sma-female on all ports
- operating power: 10w forward, 2w reverse
- operating temperature: -20 degrees c to +65 degrees c
- material: aluminum with black paint finish
What sets our cavity diplexer apart?
- precision manufacturing: our 20-year factory in chengdu produces each diplexer with rigorous quality control.
- made-to-order customization: we offer frequency adjustments, connector changes, and custom mounting brackets.
- rapid delivery: samples ship within 48 hours, with standard orders fulfilled in 21 days.
- professional support: our team provides technical assistance from design to implementation.
How can this benefit your system?
the cavity diplexer helps optimize antenna usage and prevent signal interference in:
- gsm-r and railway communications
- pmr and public safety networks
- iot and m2m applications
contact us today to learn more about our 891-903mhz/936-948mhz cavity diplexer and how it can enhance your communication infrastructure.
Si Chuan Keenlion Microwave a large selection in narrowband and broadband configurations, covering frequencies from 0.5 to 50 GHz. They are designed to handle from 10 to 30 watts input power in a 50-ohm transmission system. Microstrip or stripline designs are utilized, and optimized for best performance.
We can also customize RF Cavity Diplexer according to your requirements. You can enter the customization page to provide the specifications you need. https://www.keenlion.com/customization/ E-mail: sales@keenlion.comtom@keenlion.com Sichuan Keenlion Microwave Technology Co., Ltd.
Related Products
Image: https://www.keenlion.com/uploads/Cavity-Duplexer-5.jpg
Keenlion's 2 Cavity Diplexer Duplexer: Ensuring Smooth Signal Transmissions
Image: https://www.keenlion.com/uploads/2-Way-Cavity-Duplexer-4.jpg
High Power 200W 1900-2595MHz Cavity Duplexer for Radio Repeater UHF Duplexer
Image: https://www.keenlion.com/uploads/622.jpg
417-420MHz/427-430MHz UHF Duplexer Diplexer
If you are interested in us, please contact us
E-mail: sales@keenlion.com [mailto:sales@keenlion.com]
tom@keenlion.com [mailto:tom@keenlion.com]
Sichuan Keenlion Microwave Technology Co., Ltd.
Media Contact
Company Name: Sichuan Keenlion Microwave Technology Co., Ltd.
Email:Send Email [https://www.abnewswire.com/email_contact_us.php?pr=891903mhz936948mhz-cavity-diplexer-factory-built-for-rx-tx-isolation]
Country: China
Website: https://www.keenlion.com/
Legal Disclaimer: Information contained on this page is provided by an independent third-party content provider. ABNewswire makes no warranties or responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you are affiliated with this article or have any complaints or copyright issues related to this article and would like it to be removed, please contact retract@swscontact.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release 891-903MHZ/936-948MHZ Cavity Diplexer Factory Built for RX TX Isolation here
News-ID: 4305888 • Views: …
More Releases from ABNewswire
1709.5-1784.5MHz/1804.5-1879.5MHz Cavity Diplexer: Factory-Tuned for Reliable FD …
Keenlion's 1709.5-1784.5MHz/1804.5-1879.5MHz Cavity Diplexer [https://www.keenlion.com/1709-5-1784-5mhz1804-5-1879-5mhz-microwave-cavity-duplexer-diplexer-product/] delivers precise frequency splitting for FDD systems. Key features include:
- RX passband: 1709.5-1784.5MHz with less than or equal to 1dB insertion loss
- TX passband: 1804.5-1879.5MHz with less than or equal to 1dB insertion loss
- VSWR less than or equal to 1.3:1
- 10W power handling
- SMA-Female connectors
- Samples available
- Competitive factory prices
- Professional after-sales support
Image: https://www.keenlion.com/uploads/Cavity-Diplexer-210.jpg
Why Choose Keenlion?
- Precision Manufacturing: Our 20-year factory in Chengdu produces…
Keenlion's Precision Cavity Diplexer: Engineered for Superior 5G and LTE Perform …
Our technical focus ensures this cavity diplexer [https://www.keenlion.com/1920-1980mhz2110-2170mhz-microwave-cavity-duplexer-diplexer-product/] excels where it matters most. The center frequencies are meticulously controlled at 1950MHz for reception and 2140MHz for transmission, guaranteeing precise band operation. With an insertion loss of less than or equal to 1dB across both passbands, the unit ensures minimal signal attenuation, preserving power and clarity. A critical feature is the exceptional greater than or equal to 60dB isolation between the…
What Types of Castings Can Green Sand Molding Machines Produce?
Green sand molding machines [https://www.junengmachinery.com/products/] (typically referring to high-pressure molding lines, automatic molding machines, etc., that use green sand) are one of the the most widely used and efficient molding methods in the foundry industry. They are particularly well-suited for the mass production of castings. The specific types of castings they can produce are primarily constrained by the inherent characteristics of the green sand process itself and factors such as…
When One Repair Lift Isn't Enough: How Adding a Second Car Lift Can Boost Shop P …
When your shop's schedule is constantly full and a single lift [https://www.daxmachinery.com/floor-plate-2-post-car-lift-product/] becomes a bottleneck, introducing a second lift can be a game-changer. This expansion effectively doubles your capacity for chassis work without requiring more floor space, directly tackling delays and cutting turnaround times. Industry data confirms that shops with more lifts and technicians can start jobs faster and significantly reduce vehicle wait times.
Key Indicators It's Time for a Second…
More Releases for Cavity
Top Trends Transforming the Buccal Cavity Devices Market Landscape in 2025: Tech …
Use code ONLINE30 to get 30% off on global market reports and stay ahead of tariff changes, macro trends, and global economic shifts.
What Will the Buccal Cavity Devices Industry Market Size Be by 2025?
In recent times, the market for buccal cavity devices has experienced significant expansion. Its growth is expected to rise from $2.26 billion in 2024 to $2.47 billion in 2025, registering a compound annual growth rate (CAGR) of…
Progressive Cavity Pump Market Is Booming Worldwide 2025-2032
Progressive Cavity Pump Market size was valued at USD 3.39 Billion in 2023 and is poised to grow from USD 3.59 Billion in 2024 to USD 5.63 Billion by 2032, growing at a CAGR of 5.8% during the forecast period (2025-2032).
The Research report on Progressive Cavity Pump Market presents a complete judgment of the market through strategic insights on future trends, growth factors, supplier landscape, demand landscape, Y-o-Y growth…
Vertical Cavity Surface Emitting Laser Market Outlook 2034
On March 21, 2025, Exactitude Consultancy., Ltd. announces the release of the report "Global Vertical Cavity Surface Emitting Laser Market 2025 by Manufacturers, Regions, Type and Application, Forecast to 2034". The report is a detailed and comprehensive analysis presented by region and country, type and application. As the market is constantly changing, the report explores the competition, supply and demand trends, as well as key factors that contribute to its…
Buccal Cavity Devices Market Report 2024 - Buccal Cavity Devices Market Growth, …
"The Business Research Company recently released a comprehensive report on the Global Buccal Cavity Devices Market Size and Trends Analysis with Forecast 2024-2033. This latest market research report offers a wealth of valuable insights and data, including global market size, regional shares, and competitor market share. Additionally, it covers current trends, future opportunities, and essential data for success in the industry.
According to The Business Research Company's, The buccal cavity devices…
Unveiling the Power of 5000-5300MHz Cavity Filter
In the world of wireless communication and signal processing, the role of cavity filters [https://www.keenlion.com/customized-5000-5300mhz-cavity-filter-tnc-female-rf-filter-manufacture-supply-product/] cannot be overstated. These intricate devices play a crucial role in ensuring the smooth and efficient operation of various communication systems, by allowing specific frequencies to pass through while attenuating others. Among the leading manufacturers of cavity filters, Keenlion has established a reputation for crafting high-quality filters that deliver exceptional performance across a wide range…
How to Design Thermoforming Multi-Cavity Molds?
Image: https://ecdn6.globalso.com/upload/p/1194/image_product/2024-05/how-to-design-thermoforming-multi-cavity-molds.jpg
How to Design Thermoforming Multi-Cavity Molds?
With the continuous expansion of the global plastic products market and the constant innovation of technology, the design of thermoforming machine [https://www.gtmsmart.com/plc-pressure-thermoforming-machine-with-three-stations-product/] multi-cavity molds has become a topic of great concern in the plastic products industry. In plastic molding processes, the design of molds directly affects production efficiency, product quality, and cost control. Therefore, in-depth research on the design principles and techniques of thermoforming…
