Press release
Precision mixing and dispensing from Intertronics facilitates miniaturisation
eco-DUO330 from Intertronics - precision mixing and dispensing from Intertronics
With the newly developed eco-DUO330, dosing quantities of 0.005 ml (per shot) is achievable, irrespective of temperature, time, pressure and viscosity – dosed as a dot or bead – so the smallest quantities can be created as required. The microprocessor-controlled system creates a dosing accuracy of ±1 % and repeatability of over 99% in a process that is absolutely reliable and reproducible. Dependant on application, the mixture ratio between the two input materials can be easily adjusted from 1:1 to 10:1 using the intelligent control via a graphical interface. The dosing of dots, as well as bead applications, can be subjected to a continuous quality check thanks to the integrated pressure monitoring. The maximum continuous bead application is 6.6 ml/min, whereas a variable bead thickness from 0.1 mm to approximately 2 mm (directly proportional to the speed of the application) is now achievable, thanks to the unique design of the eco-DUO330.
The preeflow® eco-DUO330 is a volumetric dispensing system with self-sealing rotor-stator arrangement whereby controlled rotary motion transfers the medium by positive displacement in the stator. The medium is subject to very low stress and therefore unchanged by this process, and simply by switching to reverse-flow, preeflow ensure a clean and controlled stop of material or medium with no drips and no mess.
For further information please see www.intertronics.co.uk/preeflow-eco-DUO or visit the Intertronics blog at www.adhere.uk.com – also see www.youtube.com/intertronicsadhere.
"adhere” from Intertronics provides quality adhesive solutions to high technology, high performance assembly industries, incorporating outstanding levels of technical support and customer service.
The adhere concept covers their range of adhesives, encapsulants, coatings, sealants and tapes as well as the associated dispensing, curing and surface preparation equipment and materials used in the manufacturing and assembly processes. Also their Opti-tec brand of adhesives.
Intertronics have been certified to ISO 9001:2008 standard demonstrating their commitment to customer service and quality in delivery. Certification proves that the Intertronics quality management system ensures consistency and a continuous improvement ethic, leading to high levels of performance and customer satisfaction.
Sales partners include: Araldite, Thinky, Fisnar, DYMAX, Plato, Practical Components, Sipel, Techspray, 3DT Corona Treating Systems, SolderQuick, preeflow, Polytec PT, Opti-tec, Circuit Medic and ACC Silicones.
Intertronics
Unit 17, Station Field Industrial Estate
Banbury Road
Kidlington
Oxfordshire, OX5 1JD
Tel: 01865 842842
email: info@intertronics.co.uk
www.intertronics.co.uk
blog: www.adhere.uk.com
Press contact: Peter Swanson
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Precision mixing and dispensing from Intertronics facilitates miniaturisation here
News-ID: 400047 • Views: …
More Releases from Intertronics
Tidy workplace and precise dispensing results from preeflow® eco-PEN450 for Fra …
Franklin Electric, a leading international manufacturer of water and fuel pumps, faced a difficult challenge when tasked with optimising dispensing processes at their Czech production site.
The objective was to reduce the waste of UV curing material during the application process. Dispensing equipment previously used by Franklin Electric had been very inaccurate, creating unnecessary waste, high material costs and additional cleaning efforts.
After completing preliminary tests, the team at Franklin Electric were…
WACKER ELASTOSIL® N9111 tin free silicone from Intertronics avoids conflicting …
WACKER ELASTOSIL® N9111 from Intertronics is a tin-free single part RTV silicone adhesive sealant, with a neutral cure chemistry, producing a non-corrosive seal that does not inhibit other materials such as platinum cure silicones. This, along with its UL94 V-0 rating, makes it a strong candidate for electronics manufacturing, especially for gap filling, component ruggedisation, and form-in-place gasketing. It is stocked in depth at Intertronics for next-day delivery.
Elastosil N9111 is…
preeflow precision dispensing system from Intertronics improves quality and redu …
The automobile manufacturing industry places high demands on suppliers with regard to process reliability, quality and efficiency. To meet these challenges, a preeflow customer had to optimise his application of a two-part sealant to make a form-in-place (FIP) gasket. In his previous process, the dispensed sealant bead exceeded the tolerance limits at the point where the gasket loop completed and the sealant overlapped itself. In addition, a key process variable…
New guidance from Intertronics – How to specify a dispensing robot to increase …
Automated application of adhesives, potting compounds or encapsulants, sealants, FIP gaskets, temporary masking, lubricants, or other liquids, fluids or pastes provides productivity benefits over manual application, including consistency, speed and accuracy. As selection of a dispensing robot is sometimes a daunting task, Intertronics, a specialist adhesives and dispensing company, has compiled a short piece of guidance on how to specify a dispensing robot. The full guidance can be found on…
More Releases for Dependant
Diabetes Therapeutic Market Outlook By Global Key Players, End Industries & Tech …
The Diabetes Therapeutic market research report provides an in depth examination of the key factors stimulating market expansion. It also sheds light on the challenges or restraining factors that are poised to hinder industry growth over the forecast timeframe. Growth rate, market share captured, and valuation estimates for each region, segment, and company are documented as well.
Diabetes mellitus, or diabetes, is a metabolic condition characterised by excessive blood sugar levels.…
Diabetes Therapeutic Market Size, Share, Business Strategies and Top Vendors
Diabetes mellitus, or diabetes, is a metabolic condition characterised by excessive blood sugar levels. Insulin transports sugar from the bloodstream into our cells, where it is stored or used for energy. But in diabetes mellitus body not able to make sufficient amount of insulin. There are four main types of diabetes they are, insulin dependant diabetes mellitus, non-insulin dependant diabetes mellitus, prediabetes and gestational diabetes. The class of drugs used…
Requirements For UK Dependant Visa For Your Kids
Applying for your own UK visa can be a complex process. It can be even more so when including children. Brexit has also introduced changes to the
immigration system that must be considered when making an application. We explain below how to get a UK dependent visa now, and once the new
regulations officially come into effect.
The UK dependent visa allows a child to join their parent(s) in the UK as long…
Challenge Europe – Socket Screws from stock – or custom
Specialist fastener suppliers Challenge Europe are “big” on socket screws – with big stock and big service to ensure UK manufacturers across the electro-mechanical industries can save costs and ensure problem-free production schedules.
Socket head cap screws are frequently the threaded fastener of choice for manual or automated assembly. Typically in metric sizes of 10.9, 12.9 and 8.8 grade of high tensile steel, as well as stainless steel. Socket head cap…
Engineered Foam Market is directly dependant on number of offshore drilling acti …
Global Engineered Foam Market: Snapshot
Engineered foam is a type of lightweight plastic that finds extensive usage in a wide range of end-use application. It is used in the manufacturing of waterproofing gaskets and shock absorption. In applications pertaining to sports and leisure activities, engineered foam is used in parts that require cushioning and lightweight impact such as flotation devices, helmet paddings, and wrestling mats.
Solid and gaseous phases are combined…
New customers at the metaapes GmbH
The metaapes GmbH, specializing in professional Affiliate-Marketing, welcomes two new customers in June 2010: myfab.com and the perfumery Pieper.
Myfab is a originally in France accrued website, which brings design goods “on demand” from the designer/ fabricant directly to the consumer and can therefore offer exclusive quality furniture and accessories at affordable prices.
Since the foundation in 2008 myfab has expanded continuously and already has about 100 employees in France, Germany, Hong…
