Press release
Optically clear epoxy adhesive from Intertronics for strong bonds and fast cures
Opti-tec 5013 high performance, two-part epoxy from Intertronics
Opti-tec 5013’s medium viscosity provides good gap filling characteristics, whilst its high surface energy enables wetting and wicking between surfaces – before and during the cure cycle. At room temperature, handling strength is achieved in 30 minutes, with full cure time taking just two hours. This can be accelerated to ten minutes at 65°C.
Opti-tec 5013 is supplied in convenient side-by-side double cartridges.
For further information please see www.intertronics.co.uk/opt5013 or visit the Intertronics blog at www.adhere.uk.com
"adhere” from INTERTRONICS - dedicated to providing quality adhesive solutions to high technology, high performance assembly industries, incorporating outstanding levels of technical support and customer service.
The adhere concept covers our range of adhesives, encapsulants, coatings, sealants and tapes as well as the associated dispensing, curing and surface preparation equipment and materials used in the manufacturing and assembly processes. Also our Opti-tec brand of adhesives.
Intertronics have been certified to ISO 9001:2008 standard demonstrating their commitment to customer service and quality in delivery. Certification proves that the Intertronics quality management system ensures consistency and a continuous improvement ethic, leading to high levels of performance and customer satisfaction.
Sales partners include: Araldite, Thinky, Fisnar, DYMAX, Plato, Practical Components, Sipel, Techspray, 3DT Corona Treating Systems, SolderQuick, preeflow, Polytec PT, Opti-tec, Circuit Medic and ACC Silicones.
Intertronics
Unit 17, Station Field Industrial Estate
Banbury Road
Kidlington
Oxfordshire, OX5 1JD
Tel: 01865 842842
email: info@intertronics.co.uk
www.intertronics.co.uk
blog: www.adhere.uk.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Optically clear epoxy adhesive from Intertronics for strong bonds and fast cures here
News-ID: 328164 • Views: …
More Releases from Intertronics
Tidy workplace and precise dispensing results from preeflow® eco-PEN450 for Fra …
Franklin Electric, a leading international manufacturer of water and fuel pumps, faced a difficult challenge when tasked with optimising dispensing processes at their Czech production site.
The objective was to reduce the waste of UV curing material during the application process. Dispensing equipment previously used by Franklin Electric had been very inaccurate, creating unnecessary waste, high material costs and additional cleaning efforts.
After completing preliminary tests, the team at Franklin Electric were…
WACKER ELASTOSIL® N9111 tin free silicone from Intertronics avoids conflicting …
WACKER ELASTOSIL® N9111 from Intertronics is a tin-free single part RTV silicone adhesive sealant, with a neutral cure chemistry, producing a non-corrosive seal that does not inhibit other materials such as platinum cure silicones. This, along with its UL94 V-0 rating, makes it a strong candidate for electronics manufacturing, especially for gap filling, component ruggedisation, and form-in-place gasketing. It is stocked in depth at Intertronics for next-day delivery.
Elastosil N9111 is…
preeflow precision dispensing system from Intertronics improves quality and redu …
The automobile manufacturing industry places high demands on suppliers with regard to process reliability, quality and efficiency. To meet these challenges, a preeflow customer had to optimise his application of a two-part sealant to make a form-in-place (FIP) gasket. In his previous process, the dispensed sealant bead exceeded the tolerance limits at the point where the gasket loop completed and the sealant overlapped itself. In addition, a key process variable…
New guidance from Intertronics – How to specify a dispensing robot to increase …
Automated application of adhesives, potting compounds or encapsulants, sealants, FIP gaskets, temporary masking, lubricants, or other liquids, fluids or pastes provides productivity benefits over manual application, including consistency, speed and accuracy. As selection of a dispensing robot is sometimes a daunting task, Intertronics, a specialist adhesives and dispensing company, has compiled a short piece of guidance on how to specify a dispensing robot. The full guidance can be found on…
More Releases for ISO
Layer3 achieves ISO 27001 and ISO 27017 Certifications
Layer3, an industry leader in cloud, scalable and secure networks, has achieved the much-in-demand ISO/IEC 27001:2013 and ISO/IEC 27017:2015 certifications.
ISO/IEC 27001:2013 is the most widely used information security standard, prepared and published by the International Organization for Standardization (ISO), the world’s largest developer of voluntary international standards. It is a globally recognized standard mandating numerous controls for the establishment, maintenance, and certification of an information security management system (ISMS). The…
ISO Certification
CRMIT Solutions has announced that it has been awarded the ISO/IEC 27001:2013 certification, which will see further support of the company's digital transformation solutions, products and services business.
Bangalore, KA (May 21, 2020)- CRMIT Solutions, a pioneer in digital transformation and Customer360 solutions, have been re-confirmed the ISO/IEC 27001:2013 certification after the company successfully developed and implemented an integrated strategy for information security management to protect information assets, such as customer,…
ISO Certification Market Report 2018: Segmentation by Type (ISO 9001:2015, ISO 2 …
Global ISO Certification market research report provides company profile for The British Standards Institution, CERTIFICATION EUROPE, NQA, Lakshy Management Consultant, URS Holdings, Bureau Veritas, DNV GL AS (International Standards Certifications Global FZ), SGS, Lloyd's Register Group Services, Intertek and Others.
This market study includes data about consumer perspective, comprehensive analysis, statistics, market share, company performances (Stocks), historical analysis 2012 to 2017, market forecast 2018 to 2025 in terms of volume,…
ISO 27001/ISO 27002 Consultancy,ISO 27000,ISO 27000 Consultancy,Information Secu …
Coralesecure is a Information Security Management System (ISMS) – ISO 27001 Compliance. ISO 27000 Consultancy deals with maintaining the integrity and availability of organizational information and knowledge. Information Security Management System provides the experts on business management, and information security support and properly engages in executive communications Data loss, whether through cyber attacks or other forms of malicious intent can quickly bring an organization to its knees? The protection of…
ISO 27001 India, 27001 training India ISO
Coral eSecure is information Risk Management advisory with specific focus on Information Security (ISO 27001, ISO 17799, PCI, COBIT, HIPAA, GLBA, and DPA), Business Continuity (BS25999) and ITIL/ IT Service Management (ISO 20000). Coral is the FIRST Indian consulting organization which provides an Integrated Management System Consulting, Consisting of ISO 27001, ISO 20000 and BS25999 – ALL THREE IN ONE! Coral provides Consulting, Assurance audit and Training to address these…
ISO 27001 india, 27001 training india ISO, 17799 training india ISO, Compliance …
Our foundation of service delivery is based on sound research - thereby customers realizing definitive delight and Assurance resilience in their management system. We provide Consulting Services for ISO 27001 india, 27001 training india ISO,17799 training India ISO Security, BCM/BS25999, SAS 70, COBIT Implementation, Annual Compliance Check, Best Practices Implementation, & Quick Gap Analysis. It is a set of ‘best practices’ controls - management and systems - that enables…
