ICOP Technology introduces DM&P Vortex86 CPU based PC/104 SBC with EtherCAT support

Taipei, Taiwan / Frankfurt, Germany, November 3, 2015 – ICOP Technology introduces a new rugged PC/104 Single Board Computer (SBC) with 1.0 GHz dual-core DM&P Vortex86 DX3 processor and EtherCAT support for ISA bus based industrial control technologies. The new ICOP Technology VDX3-6755 PC/104 SBC with 2GB DDR3 not only delivers full PC/104 compliance and native ISA bus support without bridges but also comprehensive support of the open EtherCAT standard for connected control automation technologies in real-time environments. OEMs benefit from increased return on investment by continued deployment of existing ISA bus based applications for a further seven years.

To adapt field applications in harsh environments, the new ICOP Technology PC/104 SBC is equipped with one CAN 2.0 bus module and two RS-232 interfaces that are fully isolated against overvoltage of up to 2.5kV for both power and signal lines. The RS485 is protected against electro static discharge (ESD) of +/- 15kV. Additionally, it fully supports the extended temperature range from -20°C to + 70°C.

The DM&P Vortex86 DX3 integrated GPU delivers powerful graphics and supports full HD resolution of 1920 x 1080 at 60 Hertz dual display for VGA and 24-bit LVDS as well as optional video capture functionalities. This makes the new PC/104 board also suitable for cost effective vision system designs in pick & place and inspection applications.

For Ethernet and EtherCAT connectivity, the PC/104 VDX3-6755 SBC is equipped with 1x Gigabit LAN based on the RTL8111F PCIe LAN chip, and one processor integrated R6040 10/100Mbps LAN supporting the Acontis EtherCAT Master Stack for real-time Linux and DOS.

The ICOP Technology PC/104 SBC supports a wide range of operating systems – from DOS to Windows CE6.0, CE7.0, Windows 7, WES7, Windows XP Professional, Windows Embedded Standard (XPe), POS Ready (WePOS) and Embedded Linux, X-Linux and Linux right up to QNX (BSP), VxWorks (BSP) and FreeBSD. The ICOP Technology VDX3-6755 CPU board is available now.

ICOP also provides new ETX Computer-on-Modules based on new Vortex86DX3 SoC which support legacy applications and are long-term available.
For more information on the new PC/104 and ETX SBC based on Vortrex86DX3 SoC, please visit:

http://www.icoptech.com/

ICOP Technology, a member of DM&P Group, was started in 1989 as an industrial controller design house and manufacturer. Influenced by the explosive growth of the industrial computer demand in early 1990, ICOP adopted x86 SoC (System-on-Chip) technology and built their reputation on offering solid embedded SBC (Single Board Computer) for the applications where small footprint, low power consumption, wide temperature range and product longevity are critical. With more than 25 years of experience, today ICOP offers an extensive range of standard SBCs, panel PCs, box PCs and robotic solutions, as well as individually developed and manufactured, customer-specific products as part of its ODM/OEM services. The company has manufacturing facilities in China and Taiwan and sales offices in major cities around the globe.

ICOP TECHNOLOGY GmbH
Beethovenplatz 1-3
60325 Frankfurt am Main
Germany
Tel: +49 (0) 69-2475-687-0
Fax: +49 (0) 69-2475-687-77
info@icoptech.eu
http://www.icoptech.eu

This release was published on openPR.