DENTAL 3D PRINTING MARKET BY TYPE EQUIPMENT, MATERIALS AND SERVICES, TECHNOLOGY VAT PHOTO-POLYMERIZATION, FUSED DEPOSITION MODELING, SELECTIVE LASER SINTERING AND POLYJET TECHNOLOGY, APPLICATION ORTHODONTICS, PROSTHODONTICS AND IMPLANTOLOGY, END USER HOSP

The Dental 3D Printing Market is predicted to reach US$ ~35.27 billion by 2031 from US$ ~1.95 billion in 2020, and to grow at a CAGR of ~30.1% between the forecast period 2021 to 2031.

Free sample report

https://www.mraccuracyreports.com/marketreports/12/546873/Dental-3D-Printing-Market-by-Type-Equipment--Materials-and-Services--Technology-VAT-Photo-Polymerization--Fused-Deposition-Modeling--Selective-Laser-Sintering-and-Polyjet-Technology--Application-Orthodontics--Prosthodontics-and-Implantology--End-User-Hospitals-and-Dental-Labs-and-Clinics--Global-Outlo

Please click here today to buy full report @ https://www.mraccuracyreports.com/checkout/546873

Major segmentation covered in this report is as follows:

Type Equipment, Materials and Services, Technology VAT Photo-Polymerization, Fused Deposition Modeling, Selective Laser Sintering and Polyjet Technology, Application Orthodontics, Prosthodontics and Implantology, End User Hospitals and Dental Labs & Clinics

Access full Report Description, TOC, Table of Figure, Chart, etc. @ https://www.mraccuracyreports.com/reportdetails/reportview/546873

By Region

North America, Europe, Asia Pacific, and the Rest of the World

Major market players covered in this study are

3D Systems, Inc., Formlabs, Renishaw Plc., Stratasys Ltd., EnvisionTEC, DWS, Prodways Technologies, SLM Solutions, Carbon, Inc., and Dentsply Sirona, among others.

The dental 3D printing market was initially negatively impacted by the COVID-19 pandemic, as most dental offices, clinics, and laboratories were closed in many parts of the world due to lockdowns and quarantine restrictions in early 2020. This resulted in all non-essential dental procedures being deferred; the volume of outpatient cases reduced considerably in this period. Once lockdown and quarantine measures were lifted in most parts of the world, the patient flow was lower as most individuals hesitated to engage in the close-contact treatment required for dental procedures. However, recovery can be seen in most regions, especially North America and Europe, as dental services regain normalcy. The Asia Pacific dental market has been slower to recover, especially in China and India. However, the drivers that had propelled 3D dental printing previously, such as the rising digitization of dental set-ups and the expansion of dental clinics and corporate chains, are still in place. This can be expected to promote the growth of the market in 2021-2022.
In an optimistic scenario, the need for smoother clinical workflows, faster turnaround times, and fewer dental appointments could boost the market growth. Dentists may be more likely to invest in technologies like CAD/CAM and dental 3D printing to reduce the time taken to deliver dental appliances and treatment, and patients may be more likely to opt for these solutions for the same reason.
In the pessimistic scenario, it could be assumed that the economic impact of the COVID-19 pandemic on the dental industry could affect the adoption of dental 3D printing due to its high capital and operational costs. However, this is unlikely, as market recovery is already seen in most regions at present.
In the realistic scenario, it could be assumed that the long-term effect of the COVID-19 pandemic on the dental 3D printing market is neutral, growing slowly from Q3 2020 and going back to pre-COVID conditions from Q1 2021 onwards.

Growth in Edentulism in geriatric population
Edentulism (tooth loss) is a major oral health concern among the elderly; according to the WHO, ~30% of individuals aged 65 years and above are edentulous. As the elderly are more susceptible to various health conditions, including several dental ailments, this trend is expected to increase the number of people suffering from oral health problems, including edentulism. Periodontal diseases and dental cavities are also major causes of tooth loss.

Globally, there were 900 million persons aged 65 years or over in 2020. Since women live longer than men, on average, they comprise the majority of older persons, especially at advanced ages. Over the next three decades, the number of older persons worldwide is projected to more than double, reaching over 2 billion in 2050. All regions will see an increase in the size of the older population between 2020 and 2050. Globally, the share of the population aged 65 years or over is expected to increase from 9.3% in 2020 to around 16.0% in 2050.<

The dental laboratories segment accounted for the largest share of dental 3D printing market in 2021"
Based on the end user segment, the market is segmented into dental laboratories, dental hospitals & clinics, and dental academic & research institutes. In 2021, the dental laboratories segment accounted for 78.6% of the dental 3D printing market. The large share of this segment can be attributed to the increasing number of dental laboratories, expansion of dental laboratories in developing countries, rapid adoption of advanced technologies by small and large laboratories across the globe, the outsourcing of certain manufacturing functions to dental laboratories, and the rising demand for customized/fabricated dental framing solutions required for various applications.

"North America accounted for the largest share of the dental 3D printing market in 2021"
In 2021, North America accounted for the largest share of 35.8% of the dental 3D printing market, followed by Europe, the Asia Pacific, and Latin America. The large share of the North American market can be attributed to the high and growing incidence of dental caries and tooth loss, the rising geriatric population, high oral care expenditure, increasing demand for cosmetic dentistry, and the rising popularity of digital dentistry. However, the Asia Pacific region is projected to grow at the highest CAGR of 22.6% during the forecast period. The growing geriatric population, increasing demand for digital dental solutions to ease the clinical workflow, growing dental tourism, rising disposable incomes, and the growing focus of leading market players on expanding their distribution networks in the emerging APAC countries drive market growth.

By Product & Services
Services
Material
Plastic
Metal
Others
Equipment
Dental 3D Scanners
Dental 3D Printers
By Technology
Vat Photopolymerization
Stereolithography (SLA)
Digital Light Processing (DLP)
Liquid Crystal Display (LCD)
Selective Laser Sintering
PolyJet Technology
Fused Deposition Modeling
Others
By Application
Prosthodontics
Orthodontics
Implantology
By End User
Dental Laboratories
Dental Hospitals and Clinics
Academic & Research Institutions

30 Crawley Lane, West Sussex, RH10 7EG, United Kingdom
3351 Green Turtle Rd, Regina, SK S4V 3N6, Canada
Call Us - UK +44 7452119323
USA +1 8045001224
Email us - sales@mraccuracyreports.com

MR Accuracy Reports is a Market Research and consulting company that accomplishes requirement of research agencies, small, medium and large corporations, global business leaders, government organizations, SME's, Individual & Start-ups, top management consulting firms. MRA Reports also offers customized research reports, consulting services, and syndicated research reports.We delivers strategic market research reports, statistical survey, SWOT, PESTLE, crucial facts, employee details, industry analysis & forecast data on products & services, markets and companies.

We support in business decision making on features such as market entry strategies, market sizing, market share analysis, sales & revenue, technology trends, competitive analysis, product portfolio & application analysis etc. Our library of 750,000 + reports targets high growth emerging markets in the USA, Europe Middle East, Africa, Asia Pacific covering industries like IT, Telecom, Semiconductor, Chemical, Healthcare, Pharmaceutical, Energy & Power, Manufacturing, Automotive & Transportation, Food & Beverages etc.

This release was published on openPR.