openPR Logo
Press release

Seamless casing pipe vs ERW casing pipe

erw steel pipe

erw steel pipe

Seamless steel casing pipes-casing made of seamless steel pipe as raw material

Seamless pipe refers to a steel pipe manufactured by four methods: hot rolling, cold rolling, hot drawing, and cold drawing. There is no weld seam on the pipe body itself.

ERW casing pipe-casing made of electric welded pipe as raw material

ERW pipe refers to a straight seam welded pipe manufactured through a high-frequency resistance welding process. The raw material steel plate (coil) of ERW welded pipe is made of low-carbon microalloy steel rolled by TMCP (Thermo-Mechanical Control Process).

Outer diameter tolerance

Seamless steel pipe: hot-rolled forming process is adopted, and the sizing is completed at about 8000C. The raw material composition, cooling condition and cooling state of the roll of the steel pipe have a great influence on its outer diameter, so the outer diameter control is difficult to be accurate and fluctuates The range is larger.

ERW steel pipe: adopts cold-formed forming, and sizing is completed by 0.6% reduction. The process temperature is basically constant at room temperature, so the outer diameter control is accurate and the fluctuation range is small, which is helpful to eliminate black leather buckles;

Wall thickness tolerance

Seamless steel pipe: It is produced by round steel perforation, and the wall thickness deviation is large. The subsequent hot rolling can partially eliminate the unevenness of the wall thickness, but the most advanced unit can only be controlled within ±5-10%t.

ERW steel pipe: using hot-rolled coil as raw material, the thickness tolerance of modern hot-rolling can be controlled within 0.05mm.

Exterior

The outer surface defects of the blanks used in seamless steel pipes cannot be eliminated by the hot rolling process, and the defects can only be polished after the finished product is completed; the spiral path left after piercing can only be partially eliminated in the process of reducing the wall.

ERW steel pipe uses hot-rolled coils as raw materials. The surface quality of the coils is the surface quality of ERW steel pipes. The surface quality of hot-rolled coils is easy to control and high in quality. Therefore, the surface quality of ERW steel pipes is much better than seamless steel pipes. .

Ovality

Seamless steel pipe: hot-rolled forming process is adopted. The raw material composition of the steel pipe, the cooling condition and the cooling state of the roll have a great influence on its outer diameter, so it is difficult to accurately control the outer diameter and has a large fluctuation range.

ERW steel pipe: adopts cold bending forming, so the outer diameter control is accurate and the fluctuation range is small.

Stretching test

The tensile performance indexes of seamless steel pipes and ERW steel pipes are in line with API standards, but the strength of seamless steel pipes is generally at the upper limit and the plasticity is at the lower limit. In comparison, the strength index of ERW steel pipes is in the best state, and the plasticity index is 33.3% higher than the standard. The reason is that the performance of hot-rolled coils, the raw material of ERW steel pipes, is guaranteed by means of microalloying smelting, out-of-furnace refining, and controlled cold and controlled rolling; seamless steel pipes mainly rely on means of increasing carbon content, which makes it difficult to ensure strength and plasticity. Reasonable match.

hardness

The raw material of ERW steel pipe, hot-rolled coil, has extremely high precision of controlled cold and controlled rolling during the rolling process, which can ensure the uniform performance of all parts of the coil.

Grain size

The raw material of ERW steel pipe-hot-rolled coil is made of wide and thick continuous casting billet, with thicker fine-grained surface solidification layer, no columnar crystal area, shrinkage cavity and porosity, small composition deviation, compact structure; in the subsequent rolling process In the middle, the application of controlled cold and controlled rolling technology further ensures the grain size of raw materials.

Anti-collapse test

ERW steel pipe is due to the characteristics of its raw material and pipe making process. Its wall thickness uniformity and ellipticity are far better than seamless steel pipes, which is the main reason why the collapse resistance performance is higher than that of seamless steel pipes.

Impact test

Since the impact toughness of the base material of ERW steel pipe is several times that of seamless steel pipe, the impact toughness of the weld is the key of ERW steel pipe. By controlling the impurity content of raw materials, the height and direction of slitting burr, the shape of forming edge, the welding angle, and the welding speed , Heating power and frequency, welding extrusion volume, intermediate frequency withdrawal temperature and depth, air-cooling section length and other process parameters ensure that the impact energy of the weld reaches more than 60% of the base metal. If further optimized, the impact energy of the weld can be close to that of the base metal. Material, so as to achieve seamless performance.

Blasting test

The blasting test performance of ERW steel pipe is much higher than the standard requirement, mainly due to the high uniformity of wall thickness and uniform outer diameter of ERW steel pipe.

Straightness

The seamless steel pipe is formed in a plastic state, and the straightness of the pipe end is relatively difficult to control with single ruler (3 to 4 times ruler for continuous rolling);

The ERW steel pipe is cold-worked, and it has online straightening in the reduced diameter state, plus infinite times the ruler, so the straightness is better.

Steel consumption of casing for ten thousand meters of footage.

The wall thickness of ERW steel pipe is uniform, and its wall thickness tolerance can be neglected. The control accuracy limit of seamless steel pipe wall thickness difference is ±5%t, and it is generally controlled at ±5-10%t. In order to ensure that the minimum wall thickness can meet the standard requirements and performance, the solution can only be solved by appropriately increasing the wall thickness. Therefore, in the casing of the same specification and the same weight, the ERW steel pipe is 5-10% longer than the seamless steel pipe, or even more, which reduces the steel consumption of the casing for 10,000 meters by 5-10%. Even at the same price, ERW casing pipe virtually saves users 5-10% of purchasing costs.
https://www.eastern-steels.com/index.html

Xueshi Rd, Yuelu Technology Industrial

Park, Changsha,China 410006

Eastern Steel is a leading manufacturer and distributor

Custom-made
We use the advanced tools and technology to meet the varied requirements of pipes and tubes for the food processing industry, chemical industry, brewing industry, the pharmaceutical industry, cement industry, oil & gas industry, refineries, and water desalination.

Quality advantages
This was achieved by introduction of the unique equipment as well as the latest methods of quality control and testing of the manufactured pipe products. Modern pipe-rolling facilities, powerful technology base and highly qualified personnel make Eastern Steels competitive on equal terms with the worlds recognized leading brands.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Seamless casing pipe vs ERW casing pipe here

News-ID: 2707685 • Views: 262

More Releases from Eastern steel Manufacturing Co.,Ltd

Anti-corrosion technical requirements for seamless pipes
Seamless steel pipe (SMLS) is the most widely used pipe material at present. Generally, it needs anti-corrosion treatment when it is used for chemical pipelines, oil pipelines, natural gas pipelines, water pipelines and other projects. The common anti-corrosion processes of seamless steel pipes mainly include 3PE anti-corrosion, Epoxy coal tar anticorrosion, epoxy resin anticorrosion, IPN8710 anticorrosion, cement mortar anticorrosion technology, etc. 1. Why is seamless steel pipe anti-corrosion? Seamless steel pipe is
What are the commonly used heat treatment processes for seamless steel pipes?
There are many varieties of steel pipes, and the steel grades (species) used are not the same. The chemical composition of the same variety of steel pipes may also be different, but after heat treatment, the steel pipes can meet the relevant technical standards or technical conditions of the purchaser. According to product standards, seamless steel pipe heat treatment processes mainly include the following five categories. (1) Quenching + high temperature
Technical Standards for Precision Seamless Hydraulic Tubes
What is precision hydraulic seamless steel tube? Precision seamless hydraulic tube made of precision cold drawn seamless steel tubes that are processed by black or gray phosphating process, and the phosphated steel tubes are sealed and rust-proofed.Hydraulic steel pipes are basically divided into fluid pipes and oil steel bobbins used in hydraulic systems, also known as honing pipes, and cold-drawn or cold-rolled precision seamless steel tubes also include hydraulic steel tube. Technical

All 4 Releases


More Releases for ERW

Performance Comparison of ERW and Spiral Steel Pipe
Performance comparison of carbon ERW steel pipe and spiral steel pipe: 1. Overview The welding of ERW steel pipe is the skin effect and proximity effect of high-frequency current. The process of using high-frequency current and induced high-frequency current (rising at the end of the 20th century) resistance to heat and melt the edge of the tube blank, and apply squeezing force to weld together process. The welding of SSAW steel pipe is
Non-destructive Testing of A53 ERW Welded Pipe
In order to protect the quality of the ERW welded pipe we produce, we will conduct quality inspection on each welded pipe produced. So what are the inspection methods for welded pipe? Today we will follow the editor of the Permanent Steel Manufacturing Co., Ltd welded pipe manufacturer to understand a bit. At present, the most common detection method we use is to use magnetic powder to detect the quality of
ERW Steel Pipes And Tubes Market Research Technology Outlook 2019-2024
The ERW Steel Pipes And Tubes Market recently launched by Market Insights Reports for its clients. This report offers to clients with factual data validated by industry experts and business heads. The report highly involves chapter wise explanation for every aspect of the market wherein the drivers, trends, opportunities, leading and trending segments are discussed in detail with specific examples. Profiles of leading players are also discussed along with their
ERW Steel Pipes and Tubes Market
According to a research report published by Azoth Analytics in June 2019, the Global Electric Resistance Welded (ERW) Steel Pipes and Tubes Market was valued at USD 86.6 billion in the year 2018. Global ERW Steel pipes and tubes market is expected to grow mainly due to rapid urbanization in emerging economies, development of larger projects in construction, water and waste water sector along with robust industrialisation growth in automotive,
Global ERW Steel Pipes and Tubes Market Growth 2019-2024
Market Research Report Store offers a latest published report on ERW Steel Pipes and Tubes Market Analysis and Forecast 2019-2025 delivering key insights and providing a competitive advantage to clients through a detailed report. This report focuses on the key global ERW Steel Pipes and Tubes players, to define, describe and analyze the value, market share, market competition landscape, SWOT analysis and development plans in next few years.To analyze the
ERW Steel Pipes and Tubes Market Size, Share, Development by 2024
Global Info Research offers a latest published report on ERW Steel Pipes and Tubes Market Analysis and Forecast 2019-2025 delivering key insights and providing a competitive advantage to clients through a detailed report. This report focuses on the key global ERW Steel Pipes and Tubes players, to define, describe and analyze the value, market share, market competition landscape, SWOT analysis and development plans in next few years. To analyze the ERW