openPR Logo
Press release

Schaltbau GmbH: new high-performance charging connector for industrial trucks

08-26-2013 05:32 PM CET | Logistics & Transport

Press release from: Schaltbau GmbH

The LV-HPC connector system meets DIN VDE 0623-589 standards.

The LV-HPC connector system meets DIN VDE 0623-589 standards.

Munich, 13 June 2013: The new LV-HPC (High Power Connector) charging connector made by Schaltbau meets the DIN VDE 0623-589 standards for a greater current-carrying capacity. The series is therefore suitable for state-of-the-art fast chargers such as those used with industrial trucks. A red-coded keying pin signifies operation at 120, 250 and 400 amperes for charging wet-cell batteries and serves to prevent mismating at the same time.

The latest generation of industrial truck batteries is designed to release the stored energy as slowly as possible during operation and then recharge as quickly as possible in order to minimise downtimes and cut costs. The LV-HPC series makes this high performance possible. The connectors are capable of carrying the full rated current load without exceeding the maximum allowed temperature difference. The socket contacts of these high-power connectors are capable of conducting high currents without overheating.

Charging lithium-ion batteries

The series is also well suited for use with lithium-ion batteries, which can be charged at a considerably faster rate than lead batteries. Overall, this contact system offers the following key advantages: constantly high contact pressure, high-quality solid power contacts, continuous low resistance, low contact warming and high resistance to shock and vibration.

“Connect – Contact – Control”. Under this motto, Schaltbau GmbH develops and manufactures electromechanical components for transportation technology, energy, industry and industrial trucks. Founded in 1929, the company has ten locations of its own and more than 60 sales partners worldwide. Its range of products includes connectors, snap-action switches, contactors and electrics for rolling stock. The Schaltbau GmbH quality management system is certified in accordance with DIN EN ISO 9001 and its ecological management system meets DIN EN ISO 14001 standards. Furthermore, the company has been a Q1 supplier to Deutsche Bahn AG since 2004. Its German plants in Velden and Aldersbach have been certified in accordance with the International Railway Industry Standard (IRIS) since October 2008.

Schaltbau GmbH
Ms Svenja Bierbrauer, Marketing
Hollerithstrasse 5
81829 Munich
Germany
bierbrauer@schaltbau.de
www.schaltbau-gmbh.de
Phone: +49 89 93005-153
Fax: +49 89 93005-156

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Schaltbau GmbH: new high-performance charging connector for industrial trucks here

News-ID: 263792 • Views:

More Releases from Schaltbau GmbH

Schaltbau GmbH exhibiting at InnoTrans for the tenth time
Schaltbau GmbH exhibiting at InnoTrans for the tenth time
Munich, 18 August 2014: Under the motto “Customizing is Our Standard” Schaltbau GmbH will be exhibiting its innovations in railway engineering at this year’s InnoTrans in Berlin (September 23 to 26) at stand 102 in hall 2.2. Highlighted will be the new S337 Series configurable master controller, the CH1130/02 update of the CH Series high-voltage contactor, and the newly developed replacement insert for the receptacle of the UIC558 Series connector.
Schaltbau GmbH: groundbreaking ceremony for plant expansion
Schaltbau GmbH: groundbreaking ceremony for plant expansion
Munich, 29 July 2013: Schaltbau GmbH is expanding production capacities at its 
Velden and Aldersbach plants, both located in Lower Bavaria. The company is investing a total of seven million euros in new buildings and production equipment, in order to generate additional growth with innovative Schaltbau products and bolster the job situation in the region. Schaltbau is investing in state-of-the-art production buildings at both sites. After a nine-month construction period,
Schaltbau GmbH snap-action switches used by Heidelberger Druckmaschinen AG
Schaltbau GmbH snap-action switches used by Heidelberger Druckmaschinen AG
Munich, 29 April 2013: Schaltbau’s latest S970-series snap-action switches are installed in sophisticated printing machines made by Heidelberger Druckmaschinen AG. These hardwearing, highly efficient components operate as position and limit switches in the printing and coating units of state-of-the-art sheet-fed offset printing presses. The snap-action switches installed in these machines are exposed to severe conditions. Not only do they need to be resistant to aggressive chemical detergents, they also have
Schaltbau GmbH at the Intersolar in Munich
Schaltbau GmbH at the Intersolar in Munich
Munich, 15 April 2013. This year Schaltbau GmbH will once again be present at the Intersolar tradefair, being held in Munich from 19 to 21 June. The company will be showcasing its state-of-the-art DC contactors, snap-action switches with positive opening operation as well as its range of connectors. Used as main or pre-charging contactors, the DC contactors disconnect the solar panels from the inverter on the DC side, handling currents

All 5 Releases


More Releases for DIN

Perle Launches DIN Rail Hi-PoE Injectors
Perle Systems, a global provider of advanced Device Networking Hardware, today announced the availability of DIN Rail PoE Injectors. INJ PoE Injectors are designed to provide up to 60W of IEEE802.3bt compliant power over Ethernet cabling to connected devices such as wireless access points, pan-tilt-zoom (PTZ) cameras and video phones. Power over Ethernet Injectors enable increased flexibility for the location of installed equipment and can support long Ethernet runs up to
Perle launches DIN Rail Patch Panels
Simplify the connection between field cabling and control cabinet cabling NASHVILLE, TN—June 25th, 2019 — Perle Systems, a global provider of advanced Device Networking Hardware, today announced the availability of DIN Rail Patch Panels. One-to-one patch panels enable organised, flexible and easy connections between field cabling and the control cabinet. Standard Ethernet patch cables are used between the patch panel and the control cabinet equipment, such as PLCs, switches and routers. Through
Global DIN Rail Mounted Accessories Market Professional Survey Report
This report studies DIN Rail Mounted Accessories in Global market, especially in North America, China, Europe, Southeast Asia, Japan and India, with production, revenue, consumption, import and export in these regions, from 2013 to 2018, and forecast to 2025. This report focuses on top manufacturers in global market, with production, price, revenue and market share for each manufacturer, covering ABB Eaton WAGO TE Connectivity Connectwell Schneider Electric Omron Wieland Electric
Global DIN Rail Terminal Blocks Industry Market Analysis & Forecast
Global DIN Rail Terminal Blocks Industry Market Analysis & Forecast 2018-2023, the revenue is valued at USD XX million in 2017 and is expected to reach USD XX million by the end of 2023, growing at a CAGR of XX% between 2018 and 2023. The production is estimated at XX million in 2017 and is forecasted to reach XX million by the end of 2023, growing at a CAGR of
DIN Connectors Market to Record an Exponential CAGR by 2018 to 2028(According to …
DIN Connectors- Market Overview A DIN connector is a type of electronic connectors that are used for various applications. DIN connectors contains straight round pins, which are composed of a protective metal skirt.  The DIN Connectors are used parimarily in the analog audio/video devices and for electrical connections. DIN connectors were also used in earlier PCs for mice and keyboards as plugs and sockets. Eventually, all DIN-Connector-based mice and keyboards were
New ex-stock centenary catalogue from Lee Spring has more DIN-Plus springs – s …
Lee Spring’s new Centenary Catalogue issue 25 includes a full new section of DIN-Plus parts 2 and 1 compression springs. This extensive 525 series of new parts in end-closed passivated stainless steel wire, or end-squared and ground plated spring steel, provides manufacturers with a welcome resource for rapid delivery of standard parts, as well as a springboard for specification of custom units to suit those slightly different installations. DIN part