openPR Logo
Press release

MXAM 1.7: Check Larger Models even Faster

10-01-2013 05:38 PM CET | IT, New Media & Software

Press release from: Model Engineering Solutions GmbH

Model Examiner 1.7 is considerably faster than its predecessor and even better at handling larger models

Berlin, 16.05.2013 – Model Engineering Solutions (MES) is the specialist in model-based quality assurance for embedded vehicle software. With release 1.7, we have significantly improved the analysis speed of our Model Examiner tool. This triumph in performance highlights the position of the analysis tool as market leader, and is especially beneficial for checking larger models.

Greater Productivity, Reliable Safety
Increased performance is essential to automotive manufacturers. There are up to 700 guidelines in model-based development and the models themselves are expanding in size, making compliance checking an ever more complicated task. The Model Examiner (MXAM) offers not only an economically viable solution to this challenge, but also a high level of security. “We have been testing the new MXAM release and I can definitely say that it fits our needs completely. In fact analysis duration has dropped by 30%, which is an outstanding result.” (Karim Bouziane, Renault)

Checking, Correction and Documentation with a Single Click
MXAM checks whether your Simulink®, Stateflow®, TargetLink®, and ASCET® models comply with all the relevant regulatory and company-specific modeling guidelines – quickly, reliably, and automatically. Should MXAM detect errors, they can be eradicated immediately. MES offers the tool in two editions with a differing functional scope: The MISRA® Compliance Solution checks your software models for MISRA compliance. The Functional Safety Solution uses additional dataflow and control flow analyses to check whether the functional safety requirements of the ISO 26262 standard have been fulfilled.

“The Model Examiner stands for best practice, state-of-the-art technology combined with maximum cost effectiveness. The new release supports our customers in meeting the necessary regulatory requirements with ease and boosting their productivity further still,” comments Dr. Ingo Stürmer, founder and CEO of Model Engineering Solutions.

Model Engineering Solutions GmbH (MES) specializes in the integrated quality assurance of embedded automotive software. The Model Examiner (MXAM) is MES’s classic tool and should be your first choice for checking guideline consistency of Simulink® and TargetLink® models. MES also provides individual consulting services and customized training programs for companies wishing to introduce or enhance their existing model-based development processes, use new technologies such as AUTOSAR, or fulfill new requirements such as ISO 26262. Amongst MES’s clients are major OEMs and suppliers from the automotive industry. MES is a TargetLink Strategic Partner of dSPACE GmbH and a MathWorks Product Partner.

Dr. Heiko Dörr (COO)
Model Engineering Solutions GmbH (MES)
Friedrichstraße 55, D-10117 Berlin
Tel: +49 151 11428632
Fax: +49 30 2091 6463 33

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release MXAM 1.7: Check Larger Models even Faster here

News-ID: 260892 • Views: 952

More Releases from Model Engineering Solutions GmbH

New guideline documents available in MXAM DRIVE
MXAM DRIVE v.3.8 with extended content addressing Embedded Coder® users and ASCET® users. April 06, 2016, Berlin: Model Engineering Solutions (MES), software specialists from Berlin, enhanced their software tool MES Model Examiner DRIVE® (MXAM DRIVE) with two new guideline documents. Adherence to modeling guidelines is the best practice for improving the quality of software models. However, with over 500 guidelines published by automotive consortia, plus a huge number of company- and
MXAM DRIVE – The first choice for guideline checking
MXAM DRIVE is the platform-independent tool for guideline checks in model-based software development. April 06, 2016, Berlin: The guideline compliance checking tool MES Model Examiner® (MXAM) from Model Engineering Solutions (MES) has undergone a remarkable product development over recent years. The fruitful feedback of customers has supported the continuous growth of MXAM significantly. From MXAM to MXAM DRIVE Requests for diverse additional functionalities led to the introduction of a new tool platform
MES launches two new projects: Model-based software development in avionics and software development methodology for multicore processors. Berlin (Germany), October 27, 2015: Model Engineering Solutions (MES) starts two new research projects this fall. The objective of MCAS, funded by the Federal Ministry of Economic Affairs and Energy, is to develop a software model verification procedure to safeguard the current safety standard for avionics. The second research project, ASSUME, concerns itself with
Everything in View with the Assessment Analyzer
Berlin, 07 October 2015: Model Engineering Solutions GmbH (MES) has added an Assessment Analyzer to its proven MTest testing tool. This interactive, graphical addition to the MTest Assessment Framework makes it easy to visualize selected test sequences and inspect them thoroughly – making systematic and fully-automated model and software testing a considerably easier task. Assessment Analyzer extends established MTest Assessment Framework MES developed the Assessment Framework as an integral part of MTest

All 5 Releases

More Releases for MES

MES Joins SafeTRANS Network
Berlin (Germany), April 28, 2015: Model Engineering Solutions (MES), specialists in embedded software from Berlin, has become a member of the international competence network SafeTRANS. SafeTRANS is an association of prestigious enterprises and scientific institutions that ensures exchange between research and industry in embedded systems for transportation. The goal of the network is to increase the safety of transportation with the help of cutting-edge technology and optimized processes. Focus of the
Tackling the Challenges of Automotive Software Engineering in Transition to Smart Mobility Berlin (Germany), March 23, 2015: Model Engineering Solutions GmbH (MES) and the Brandenburg University of Technology (BTU) will be organizing this year’s Automotive Software Engineering Workshop of the German Informatics Society (GI), which will be held at the BTU in Cottbus on September 29, 2015. The call for papers has already begun and contributions can be submitted until April
MES: Expansion in Asia
Berlin, November 24, 2014: Model Engineering Solutions (MES), the Berlin-based specialist for model-based software development, has significantly expanded its business in Asia. In recent years, MES has built up a network of local partners in Japan, Korea, China, and India in order to benefit from the growing market and increasing interest in model-based development and ISO 26262 in Asia. Asia: Driving force in the automotive industry The automotive industry continues
Summer Webinars: The MES Webinar Series Continues
Berlin, 19.08.2014: Model Engineering Solutions (MES), the Berlin-based experts in model-based software development, will be continuing its successful webinar series over the summer months. The series is designed to inform you about current ideas and challenges in model-based software development with a focus on the automotive industry. The webinars are conducted by MES experts with extensive industry experience. They are held in English and are free of charge. Sessions conclude
SAP MES Day: Producing upon customer request
Liestal (CH), May 21, 2014 – Trebing + Himstedt, SAP MES expert for consulting, implementation and licensing of SAP solutions in the production environment and SAP (Schweiz) AG would like to invite you to the SAP MES Day for discrete manufacturing on June 24, 2014 in Regensdorf (ZH), Switzerland. Participation is free. On this day, the SAP MES experts Trebing + Himstedt and SAP will provide information based on numerous
MES & Process Minds Europe 2013
Automation & Control - Improving Operational Excellence in Process Industry Manufacturing operations by implementing Comprehensive & Compliant Data and Information Platform & Integrated IT systems| 30th September– 1th October 2013, Maritime ProArte Hotel Berlin, Germany "Very good and informative conference to share knowledge and to benchmark your company in your industry sector." Kathrin Wilhelm, Fresenius Kabi D-GmbH By popular demand, we.CONECT is bringing board-level attendees from manufacturing execution systems management from all over