Automotive Plastic Fuel Tank Market Top Key Players - Plastic Omnium, Textron – Kautex, TAPP, TI Fluid Systems, Yachiyo, Unipres, Fuel Total Systems, SMA Serbatoi, SPA Italy, Magna International
In an internal combustion engine, the vehicle's fuel tank is an integral part of the fuel system. A tank is a container used to store automotive fuels such as gasoline, diesel and gas. Fuel tanks are now made from a variety of composite materials including ferroalloys, aluminum alloys and polymers. Sheet metal stamping and top and bottom welding are used to make steel gas tanks. The steel gas tank is made of high toughness steel with high tensile strength. Gasoline tanks deform due to viscosity under the influence of external forces, but remain sealed. Steel gas tanks have very high corrosion resistance, which is their main drawback.Water entering the gas tank is very likely to either enter in the form of condensation or mix with the fuel or sink to the bottom. Stamping and welding are used to make aluminum gas tanks. It is less aggressive than steel fuel tanks and weighs less.
Aluminum fuel tanks have the following disadvantages compared to steel tanks: Potential gasoline leaks due to breakage of weld seams during operation; poor deformability (impact resistance); Stress concentrators exist in the material after short-term deformations that exceed strength Expensive cost.
Request For Sample@ https://bit.ly/2YonYxf
GLOBAL AUTOMOTIVE PLASTIC FUEL TANK MARKET DYNAMICS
Modern plastic fuel tanks must meet the following operating requirements, including a vehicle operating temperature range of -60°C to +80°C. local and short-term heating up to 110 ° C (stronger sunlight, exhaust system, high temperature near the point of contact with the wiring harness); Robustness at overpressures up to 0.02 MPa. Although the use of plastic tanks has changed slightly due to tightened permeability standards, some experts believe that use will gain momentum by the end of the decade as new plastic manufacturing technologies become commercially viable operations.
The main drivers expected to drive the market expansion over the next few years are growing demand for fuel-saving light vehicles, increasing automobile production and increasing urbanization. One of the main drivers of the market expansion is the growing demand for commercial vehicles and sales driven by the growth of the e-commerce sector, which has led to the growth of the logistics and construction industry. However, problems such as rising demand and demand for electric vehicles and rising prices of non-metals such as aluminum can hinder the development of the industry.
GLOBAL AUTOMOTIVE PLASTIC FUEL TANK MARKET SEGMENTATION
The Global Automotive Plastic Fuel Tank Market can be segmented into following categories for further analysis.
By Integrated Capacity
• Less than 45 Litres
• 45 Litres to 70 Litres
• Above 70 Litres
By Vehicle Application
• Residential Application
• Commercial Application
• Industrial Application
• High-Capacity User Application
By Connectivity Material Type
• Specialised Plastics
• Recyclable Plastics
By Regional Classification
• Asia Pacific Region – APAC
• Middle East and Gulf Region
• Africa Region
• North America Region
• Europe Region
• Latin America and Caribbean Region
RECENT TECHNOLOGICAL TRENDS IN GLOBAL AUTOMOTIVE PLASTIC FUEL TANK MARKET
Plastic fuel tanks and systems are designed to provide the automotive industry with an environmentally friendly, economical, lightweight and safe alternative. The goal of this work is to design and numerically study the robustness and develop a modular prototype using high-density polyethylene. High-density polyethylene is a strong, lightweight material that allows manufacturers to significantly reduce the overall weight of their vehicles and make them more economical.
Plastic petrol tanks also provide increased safety in the event of a crash. Unlike metal fuel tanks, many tanks can bend and bend instead of petrol tearing, bursting and leaking, reliably eliminating fuel leaks. Plastic fuel tanks are made from high-density polyethylene (HDPE), a durable and lightweight material that allows manufacturers to significantly reduce the overall weight of their vehicle while improving fuel economy. Plastic gas tanks also provide greater safety in the event of a crash.
COMPANIES PROFILED
• Plastic Omnium
• Textron – Kautex
• TAPP
• TI Fluid Systems
• Yachiyo
• Unipres
• Fuel Total Systems
• SMA Serbatoi
• SPA Italy
• Magna International
Read More Information: https://mobilityforesights.com/product/automotive-plastic-fuel-tank-market/
Contact:
Company Name: Mobility Foresights
Contact Person: Kunal Roy
Email: Send Email
Phone: +1-315-675-4056
Address: P3&P4, HAL 3rd Stage
City: Bangalore
State: Karnataka
About Us:
We are among the very few market research firms globally, specialized in mobility domain(s). Our zone of research entails automotive, aerospace, marine, locomotive, logistics and construction & agricultural equipment. We deal in syndicated research, custom research and consumer research for all the above domains mentioned.
We envision the future of mobility every single day, following mobility domains is not just our profession rather it’s our passion. We are here, just to serve you in the most ideal way and your fulfillment is above everything else.
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Automotive Plastic Fuel Tank Market Top Key Players - Plastic Omnium, Textron – Kautex, TAPP, TI Fluid Systems, Yachiyo, Unipres, Fuel Total Systems, SMA Serbatoi, SPA Italy, Magna International here
News-ID: 2459638 • Views: …
More Releases from Mobility Foresights
Latest Trends In Global Sea Moss Market
The sea moss market has been experiencing a surge in popularity and demand due to its numerous health benefits and versatile applications. Sea moss, scientifically known as Chondrus crispus or Irish moss, is a type of red algae found in coastal regions of the North Atlantic Ocean. It has gained recognition for its potential nutritional and medical properties.
Request for Sample@https://mobilityforesights.com/contact-us/?report=65352
Market Overview:
Sea moss is consumed both as a…
Latest Trends In Global Silica Aerogel Market
Silica aerogel, often referred to as "frozen smoke" or "blue smoke," is a remarkable and highly porous material known for its exceptional properties, including low density, high porosity, and superior thermal insulating capabilities.
This unique material has gained significant attention in various industries due to its versatile applications. The silica aerogel market has witnessed substantial growth and innovation, driven by its remarkable properties and increasing demand for efficient insulation and…
Latest Trends In Silicone Defoamers Market
Silicone defoamers, also known as silicone antifoaming agents, are crucial additives used in various industries to control and eliminate foam formation in processes and products.
Foam can be problematic in multiple applications, leading to inefficiencies, product defects, and operational challenges. As a result, the silicone defoamers market has seen steady growth, driven by the need for effective foam control in diverse sectors.
Request for Sample@https://mobilityforesights.com/contact-us/?report=87752
Key Market Drivers:
Industrial Processes: The…
Latest Trends In Gallium Oxide Market
Gallium oxide, a wide-bandgap semiconductor material, has gained substantial attention in recent years due to its remarkable electrical and thermal properties.
This compound exhibits excellent thermal stability, high breakdown voltage, and strong potential for applications in the electronics and power semiconductor industries.
The gallium oxide market is experiencing significant growth as researchers and manufacturers explore its diverse range of applications.
Request for Sample@https://mobilityforesights.com/contact-us/?report=92485
Key Market Drivers:
Power Electronics: Gallium oxide holds…
More Releases for Plastic
Agriculture Film Market SWOT Analysis of Leading Key Players Shandong Tianhe Pla …
HTF MI recently introduced Global Agriculture Film Market study with in-depth overview, describing about the Product / Industry Scope and elaborates market outlook and status to 2023. The market Study is segmented by key regions which is accelerating the marketization. At present, the market is developing its presence and some of the key players from the complete study are British Polythene Industries (BPI), Trioplast, Berry Plastics, Armando Alvarez, Polypak, Barbier…
Building Materials Market 218 : Hepworth, National Plastic Industry, Hira Indust …
Building materials in this report covered the PVC pipes and fittings, PPR pipes and fittings, PE pipes and fittings, fabrication, ducts systems for infrastructure, valves and pumps and electrical conduits PVC systems.
At present, Hepworth, National Plastic Industry, Hira Industries, Florance Plastic Industries, Polyfab Plastic Industry, MPI, Union Pipes Industry, ANABEEB, Borouge and ACO Group are the UAE leading suppliers of the building materials, and top ten of them shared about…
Yazheng Plastic Netting combined type plastic netting machine
Yazheng Plastic Netting developed combined type plastic netting machine.The combined type plastic netting machine can produce plastic deer fencing, anti bird netting, erosion control netting and plastic filtration netting.
The combined type plastic netting machine is 30m long, it is be composed of polypropylene grinding miller, extruding machine, high temperature machine, stretch machine, rolled machine and cut machine.
The horizontal thread and vertical thread of nettings that produced by…
Global Plastic Pails (Plastic Bucket) Market 2018 Key Players: Jokey Group, BERR …
Qyresearchreports include new market research report "Global Plastic Pails (Plastic Bucket) Sales Market Report 2018" to its huge collection of research reports.
In this report, the global Plastic Pails (Plastic Bucket) market is valued at USD XX million in 2017 and is expected to reach USD XX million by the end of 2025, growing at a CAGR of XX% between 2017 and 2025.
Several regional and global trends account for the attractive…
Plastic Closure Market – Analysis of Plastic Closure Test Growth, Plastic Clos …
The latest market intelligence study on Plastic Closure market relies on statistics derived from the application of both primary and secondary research to present insights pertaining to the operational model, opportunities and competitive landscape of Plastic Closure market for the forecast period, 2017 - 2022.
Get Access to Sample Pages@ https://www.marketexpertz.com/sample-enquiry-form/142
Importantly, the research taps critical data about the niche segments, market share, size, and growth rate to offer business…
Recycled Plastic & Plastic Waste to Oil Market Analysis : TMR
There is a growing need for recycling the plastic and plastic waste. Various major companies are now concentrating on developing new waste-conversion technologies. Some of the major corporates in the global recycled plastic and plastic waste to oil market are Agilyx Inc., Cynar Plc, Vadxx Energy LLC, Nexus Fuels LLC, Clean Blue Technologies Inc., JBI Inc., RES Polyflow, PK Clean, Plastic Advanced Recycling Corporation (PARC), and MK Aromatics Ltd. These…