New in Bühler Motor STOCK SERVICE: BLDC with 62mm diameter and 142mm length
Peak performance of up to 400W shows in which league this Powerhouse plays. The nominal output torque is 45 Ncm, the holding torque is 3.5 Nm and the nominal power output is 200W. But is not only the performance value of the highly dynamic internal rotor that knows how to impress: Also the service life of more than 20,000 hours speaks in favor of the new BLDC for extraordinarily technically complex tasks.
Good for the environment
Maximum performance in the tightest of spaces, with highest energy efficiency. The efficiency factor of this Motor equipped with rare-earth magnets is more than 80%. The drives are naturally RoHS compatible. Emphasis was already placed on low weight and simple recycleability during the design phase.
Good to control
The 3 phased-design, with star connection and 8 pole rotor allows the uncomplicated operation with most controllers available on the market. With 3 digital hall-effect sensors arranged at 120 degrees, the Bühler Motor BLDC is able to be combined with various sensor systems. With an almost sinusoidal back EMF, the commutation not only occurs through block commutation and sinus commutation, but can also take place sensor-less. Here the 62mm BLDC also helps with cost savings.
The zinc die cast end shields allow for a variety of mounting layouts. With problem-free attachment of encoder and/or brakes, very compact drive solutions are simultaneously possible. The modular motor design allows for light modification of the bearing shield, output shaft and shaft protrusion on the commutation side in order that the driving elements easily be modified to the specific customer demands. Through all these advantages is the new 62mm BLDC optimal for modification to specific customers' demands.
High performance, high dynamism, minimum mounting space, maximum service life, uncomplicated control, and optimum adaptability to customers' applications opens a wide spread field of applications for this new Powerhouse at Bühler Motor.
About Bühler Motor
Bühler Motor delivers demanding, custom-made, and reliable drive solutions with DC/BLDC small motors and gear motors.
More than one of out every ten employees at Bühler Motor works in Research and Development. Our in-house sample shop and R&D department, combined with state-of-the-art test labs, enable Bühler to concentrate completely on quick and flexible development of customer specific drive solutions.
With the enthusiasm typical for Bühler, 1,650 employees ensure successful industrialization and production of mechatronic drive solutions for mid- to high volume applications.
With eight locations on three continents and highly developed process competencies, Bühler Motor
is able to fulfill all customer requirements for short transit times, quality, and on-time delivery at the required volumes. The company’s strategic markets include the automotive market, the healthcare equipment market, general industrial solutions, for example building automation, and aviation applications.
Bühler Motor GmbH
Phone: +49 911 45 04-1129
Fax: +49 911 43 08 69-1129
This release was published on openPR.
Permanent link to this press release:
You can edit or delete your press release New in Bühler Motor STOCK SERVICE: BLDC with 62mm diameter and 142mm length here
News-ID: 238941 • Views: 1626
More Releases from Bühler Motor
Buehler Motor Recognized by General Motors as a 2019 Supplier of the Year Winner
Nuremberg, July 8, 2020 – Buehler Motor was named a GM Supplier of the Year by General Motors during a virtual ceremony honoring the recipients of the company’s 28th annual Supplier of the Year awards on Wednesday, June 24, 2020. During the event, GM recognized 116 of its best suppliers from 15 countries that have consistently exceeded GM’s expectations, created outstanding value or introduced innovations to the company. The awards
Bühler Motor strengthens its management
With his experience in the areas of automotive, industry, drive technology and fluid management, Achim Brömmel, as the new Vice President for Program Management Automotive & Industrial Drive Solutions, fits perfectly to Bühler Motor Nuremberg, October 7, 2019 – On October 1, Achim Brömmel took over responsibility for Program Management for Automotive & Industrial Drive Solutions of the Bühler Motor Group. In this position, he follows Mark Furtwängler, who up to
Bühler Motor Recognized by General Motors as a 2018 Supplier of the Year Winner
Nuremberg, Jube 4, 2019 – Bühler Motor was named a GM Supplier of the Year by General Motors during its 27th annual Supplier of the Year awards ceremony held Wednesday, May 15 in Detroit, MI. Mark Furtwängler (Owner & Co-CEO) and Karl Wagner (President & General Manager Buehler Motor, Inc.) personally accepted the award. During the event, GM recognized 133 of its best suppliers from 15 countries that have consistently exceeded
New Generation in the management of Bühler Motor
Kerstin Jung, new Vice President HR and Michael Eckert, new Vice President Operations Nuremberg, May 16, 2019 – Kerstin Jung has taken on overall responsibility for HR subjects at the Bühler Motor Group as Vice President Human Resources as from March 1. She follows Matthias Otto, who has decisively shaped the department over the last 12 years and significantly pushed ahead internationalization. Matthias Otto entered well-earned retirement on December 31 last
More Releases for BLDC
Brushless DC Motors Market: Top End-User Industry Consumer electronics, Automoti …
Brushless DC motors are electronically shuttled motors, without brushes. These motors are generally used in high speed applications and exhibit around 85-90% efficiency. The operation of a BLDC motor is based on the simple force interaction between the permanent magnet and the electromagnet. Countries, such as India, the U.S., China, Brazil, and Argentina, show high adoption rate of energy-efficient BLDC motors in both industrial and agricultural applications. These motors are widely
Global Brushless DC Motors Market-Growth, New Trends, Technology & Forecast up t …
The report includes the BLDC motors used in the end-user industries such as consumer electronics, automotive industry, manufacturing, medical devices, and other industries. The report provides a comprehensive analysis of the types of BLDC motors used in the industry, including inner rotor and outer rotor along with their end-user industries. The usage of types of motors in any application depends on the requirements of the application. Therefore, the introduction of
Brushless DC Motors Market Growth, Size, Analysis in The Forecast Period 2017-20 …
Brushless DC motors are electronically shuttled motors, without brushes. These motors are generally used in high speed applications and exhibit around 85-90% efficiency. The operation of a BLDC motor is based on the simple force interaction between the permanent magnet and the electromagnet. Increase in demand for electric vehicles from countries such as the U.S., Japan, Europe, China, and India, and increased usage in various industries such as chemicals, paper &
BLDC Motor Market Growth Analysis Report 2018-2023
Future Market Reports on Global BLDC Motor 2018 Research Report presents a professional and complete analysis of Global BLDC Motor Market on the current market situation. The Global BLDC Motor Market 2018 report includes BLDC Motor market Revenue, market Share, BLDC Motor industry volume, market Trends, Growth aspects. It analyses the important factors of the BLDC Motor market based on present industry situations, BLDC Motor market demands, business strategies utilized
Bühler Motor Industrial Solutions publishes new product catalogue
Nuremberg, 12th December 2012 – Not many people realize that Bühler Motor, the specialist in made-to-measure drive solutions, also has a range available for instant delivery. This instant-delivery range, known as STOCK Service, forms the core of the new product catalogue from the Industrial Solutions division at Bühler Motor GmbH. The STOCK SERVICE range covers motors from 1 W to 250 W (PMDC), EC motors from 40 W to 210 W
Cymatix Complements Portfolio with Dunkermotor Subfractional DC and BLDC motors
Value-added motion control distributor expands beyond Dunkermotor linear motors to serve industrial automation customers in California and Northern Nevada. Elgin, IL, April 24, 2012 - Cymatix, Inc., a distributor dedicated to the motion control industrial market since its inception in 1983, has complemented its existing product offering through a new channel partner agreement covering not only the Dunkermotor linear motor line, but also its subfractional horsepower brushed and brushless DC motors