openPR Logo
Press release

GEORG finishing lines division designs leading technology for aluminum company JSC KUMZ

07-30-2012 11:02 AM CET | Industry, Real Estate & Construction

Press release from: GEORG finishing lines division

Decoiler of a GEORG-slitting line

Decoiler of a GEORG-slitting line

GEORG develops cutting lines for aluminum coils up to 2,800 mm strip width: two cut-to-length lines and one slitting line

At the end of 2011 GEORG finishing lines division was assigned with the development and delivery of two cut-to-length lines and one slitting line, each with packaging line for the Russian aluminium producer Kamensk-Uralsky Metallurgical Works (KUMZ). Those lines are able to process aluminium coils with a strip width up to 2,800 mm. This important investment of KUMZ is focusing the increased export demands and the enhanced technology requirements of the aviation and transport industry.

The project realisation of the lines, which will belong to the broadest cutting lines worldwide, is in full swing at the moment. The start of production is planned in beginning of 2014. “The scope of supply is completely handled by GEORG finishing lines division and includes besides the mechanical part also the electrical control and automation. All components will be manufactured in our German workshop” (Antonio Garcia, managing director finishing lines division – member of the board)

GEORG finishing lines division: Impressive technology for coils up to a total weight of 25 tons
Each line, the two cut-to-length lines and the slitting line, are served with coils by the high bay warehouse system and are designed to produce coils with a total weight up to 25 tons.
The cut-to-length lines have the capability to cut material thicknesses of 0.20 – 3.00 mm and 3.00 -. 10 mm. They are equipped with hydraulic expandable double decoilers and with rotating cut-to-length shears. Moreover both lines have edge trimming shears with automatic cutting and strip width adjustment. Additionally the approved GEORG levelling machines in cassette change design and the electrostatically oiling machines are applied to produce high quality plates. To protect the finished stacking bundles, they can finally be wrapped in the semi automatic packaging line.

The thickness range of the slitting line is 0.20 – 5.00 mm and is covered by two slitting shears with a shear exchange unit and a tool changing device. The additional packaging line has a stacking device for commissioning of the produced baby coils, an automatic strapping device and a foil stretching machine to wrap the stacked coil packages.

With this project GEORG finishing lines division expands its strategic market segment of aluminium. Simultaneously company GEORG advances the further development of the successful installed technologies in the aluminium industry for extra wide strip width.

GEORG finishing lines division at:
ALUMINIUM Düsseldorf Exhibition 2012: Hall 14, Stand I 40
EuroBLECH 2012: Hall 16, Stand C82

Further informations: http://www.georg.com/cms/georg-finishing-lines-division.html

Kamensk-Uralsky Metallurgical Works (KUMZ)
Since the company was founded in 1944 KUMZ (KUMZ in Russian abbreviation) it was specialized in manufacturing of semi-finished products in aluminum-, magnesium-based and aluminum-lithium alloys. Today it is one of the largest downstream companies in Russia supplying high quality products for the aviation and automotive industry. The company has very high quality standards; references for this are the statement that KUMZ is a certified supplier for Boing and Bombardier.

Heinrich Georg Maschinenfabrik GmbH
GEORG is a worldwide reliable and in great demand partner for optimal solutions in the mechanical engineering sector. The excellent finishing lines and special machine tools as well as the production lines, state-of-the-art machinery and equipment for the transformer industry are internationally in use in renowned companies.

GEORG
Founded in 1948, Heinrich Georg GmbH Maschinenfabrik, is a renowned worldwide partner for advanced and superior mechanical engineering solutions. Our state of the art finishing lines and special machine tools, as well as our superior production systems, machines and equipment for the transformer production industry are used worldwide by leading companies. In its mechanical manufacturing GEORG combines cutting edge science with modern technology for precise dimensional accuracy in all its work pieces.

Over 400 staff members are the driving force behind GEORG‘s pioneering spirit which empowers the company to make progress happen and to create lasting values. Our openness helps us in winning the trust needed for lasting partnerships. GEORG sets great store by knowing where its customers come from and where they are heading for.
As a globally thinking medium sized company, GEORG is preparing for the future. Internationally our subsidiary companies and numerous representative offices guarantee optimum advice and service whereever you are. For your technical head start and our common success.

www.georg.com

GEORG finishing lines division
GEORG finishing lines division offers complete line solutions, individual components and aggregates for slitting and cut-to-length lines, multi-blanking lines, edge trimming and inspection lines and packaging lines. Easy operation, extremely short tooling times and optimized process controlled workflows are what make our solutions so efficient.

GEORG
Thomas Weber
Siegener Strasse 73-83
57223 Kreuztal
Germany
Tel. +49 (0) 2732 779-0
Fax +49 (0) 2732 779-340
band@georg.com
www.georg.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release GEORG finishing lines division designs leading technology for aluminum company JSC KUMZ here

News-ID: 229527 • Views:

More Releases from GEORG finishing lines division

GEORG finishing lines division develops new high-duty slitting line
GEORG finishing lines division develops new high-duty slitting line
GEORG-Slitting line started operation at Delta-Stahl The German Steel Service Center Delta Stahl GmbH, located in Barsinghausen near Hanover, is a competent partner for the entire metal-working industry in the field of surface-finished sheets all over Europe. They are part of the independent KNAUF INTERFER Group. With the commissioning of the high-duty slitting line, supplied by the GEORG finishing lines division the production capacity can be increased, and besides, the

More Releases for KUMZ

Aluminum-Lithium Alloy Market Size 2022 By Top Key Players -Constellium, Aleris, …
The aluminum-lithium alloy market is projected to grow at a CAGR of 5.8% during the forecast period, 2018-2030. Aluminum Lithium Alloys Market analysis report has recently added which helps to make informed business decisions. This research report further identifies the market segmentation along with their sub-types. The Global Aluminum Lithium Alloys Market is expected to reach at a huge CAGR during the forecast period. Various factors are responsible for the market's
Global Aluminum Lithium Alloy Market 2020 Growth Factors - Alcoa, KUMZ, Rio Tint …
The newly added research report entitled Global Aluminum Lithium Alloy Market 2020 by Manufacturers, Type and Application, Forecast to 2025 carries-out a multi-dimensional assessment gauging into factors such as vendor landscape with references of competitors, their market positions as well as revenue generation status. The report focuses on covering several factors such as global distribution, manufacturers, market size, and market factors that affect the global contributions that are reported in
Global Aluminum Lithium Alloys Industry 2017 Market Solutions, Products Analysis …
Qyresearchreports include new market research report Global Aluminum Lithium Alloys Market Research Report 2017 to its huge collection of research reports. The research report here discusses about several aspects pertaining to the global Aluminum Lithium Alloys market which enunciates the present statistics and future prospects with reference to the dynamics at play. The primary aim of the research report is to present a detailed overview to the readers and provide them
Global Aluminum Lithium Alloys Market-Constellium, KUMZ, Aleris, FMC
Global Industry Study Evaluate on Aluminum Lithium Alloys Market by Type, Manufacturers, Regions, and Application, Forecast up to 2022 The scope of the Aluminum Lithium Alloys Report: Global Aluminum Lithium Alloys MarketThis report primarily focuses on Aluminum Lithium Alloys in the global market. This report generally covers Aluminum Lithium Alloys market in North America, Aluminum Lithium Alloys market in Asia-Pacific, Aluminum Lithium Alloys market in Europe, Aluminum Lithium Alloys market in Latin
Aluminum Lithium Alloys Market 2017- Alcoa, Rio Tinto Alcan,, Constellium, KUMZ, …
Aluminum Lithium Alloys Market 2017 Industry research report provides important information to identify and analyze the market need, market size and competition. This market research report used in maintaining competitiveness over competitors. “Aluminum Lithium Alloys is one kind of alloys which mainly includes aluminum and lithium, it also has some other elements, like copper, zirconium and so on. The key composition is aluminum and it occupies higher than 95%. Aluminum–lithium alloys
Global Aerospace Materials Market 2016 : Cytec, Hexcel, GE Aviation, Kobelco, Al …
A market study based on the "Aerospace Materials Market" across the globe, recently added to the repository of Market Research, is titled ‘Global Aerospace Materials Market 2016’. The research report analyzes the historical as well as present performance of the global Aerospace Materials market, and makes predictions on the future status of Aerospace Materials market on the basis of this analysis. Get Free Sample Copy of Report Here : http://bit.ly/2fzaypm Major Manufacturers