openPR Logo
Press release

Extended Integration of GOEPEL electronic’s Boundary Scan into Rohde & Schwarz TSVP Platform

06-25-2012 09:03 PM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

The enhanced OEM cooperation between Rohde & Schwarz and GOEPEL electronic enables additional options for customer-optimized utilisation of the R&S TSVP (Test System Versatile Platform). Applying the extended combination of functional/in-circuit test and Boundary Scan, users are now able to achieve an even higher test depth and test speed. They benefit considerably from the utilisation of a newly developed software test type under SYSTEM CASCON named “Interactive ATE”, supporting automatic generation of interactive tests with sequential wiring on the R&S TS-PMB tester matrix.

Furthermore, users now have access to the latest test and programming technologies such as Processor Emulation Test, FPGA Assisted Test and Core Assisted Programming, a multitude of new technological opportunities to further enhance the integration’s capability and value.

“The extended solution allows for the integration of digital and, additionally, analogue test points into the world of Boundary Scan”, says Alexander Beck, Manager System Integration in GOEPEL electronic’s JTAG/Boundary Scan Division. “The combined methods provide users a seamlessly integrated production system featuring all benefits of ICT, FT and Boundary Scan as well as their integrations.”

The R&S TSVP allows the execution of in-circuit tests and functional tests. In addition to a high performance SCANFLEX® PXI JTAG controller, the integrated Boundary Scan option contains digital I/O modules PXI 5296 and PXI 52192 with 96 and 192 channels, respectively. These digital test channels are linked with the Virtual ScanPin™ technology, i.e. the contacted test point acts as an additional, virtual Boundary Scan cell during the test process. Hence, the detection of certain faults is possible only by the interaction of both methods.

These functionalities are extended by the purely analogue pin section of the R&S TS-PMB matrix, controlling GOEPEL electronic’s Boundary Scan software SYSTEM CASCON™ by means of R&S TS-PSAM (optionally also R&S TS-PSU). An important highlight is the newly developed SYSTEM CASCON test “Interactive ATE”, enabling fully automatic Boundary Scan test generation based on CAD data and R&S TSVP specific data for the description of the hardware configuration.

In addition to the integrated fault report for in-circuit and Boundary Scan tests, the option allows the configuration of PLD/FPGA components, loading of Flash components and programming of microcontrollers (MCU).

GOEPEL electronic provides the complete integration package at various levels, differing in hardware performance and software options.

Part of each package is the “CASCON-for-R&S TSVP” installation. This is a kit consisting of software, demonstration reference board and a one-year maintenance contract for both software and hardware.

GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 200 employees and generated a revenue of more than 25 Million Euro in 2011 (ca. $33Mio). GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Extended Integration of GOEPEL electronic’s Boundary Scan into Rohde & Schwarz TSVP Platform here

News-ID: 226451 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for Scan

Shortwave Infrared (SWIR) Market by Scanning Type Area Scan and Line Scan
Shortwave infrared (SWIR) technology helps the user understand the temperature of any body or surface with ease and without making any physical contact. SWIR manufacturers are coming up with newer technologies to cater to numerous applications where SWIR technology can be used to inspect, detect, and monitor the products to ensure the safety and reliability of the product for the user. The SWIR market is projected to grow from USD
CT Scan and PET Scan Market SWOT analysis & Key Business Strategies | GE Healthc …
AMA recently published a detailed study of over 180+ pages in its database on 'CT Scan and PET Scan' market covering interesting aspects of market with supporting development scenario ranging from 2013-2025. The study not just provides market size break-up by revenue and volume (Consumption, Production)* for potential countries and important business segments but also commentary on trending factors, growth drivers. Profiled players in study from the coverage
Global CT Scan and PET Scan Market Analysis 2018 Forecasts To 2023
Global CT Scan and PET Scan Market Description:- Wiseguyreports.Com Adds “Global CT Scan and PET Scan market 2018: Global Analysis, Industry Size, Share, Trends, Application Analysis and Growth Opportunities Forecast to 2023” To Its Research Database A CT machine, also called X-ray computed tomography (X-ray CT) or computerized axial tomography scan (CAT scan), makes use of computer-processed combinations of many X-ray images taken from different angles to produce cross-sectional (tomographic) images (virtual
Global CT Scan and PET Scan Market 2017 Forecast to 2022
"The Report Global (North America, Europe and Asia-Pacific, South America, Middle East and Africa) CT Scan and PET Scan Market 2017 Forecast to 2022 provides information on pricing, market analysis, shares, forecast, and company profiles for key industry participants. - MarketResearchReports.biz" A CT machine, also called X-ray computed tomography (X-ray CT) or computerized axial tomography scan (CAT scan), makes use of computer-processed combinations of many X-ray images taken from different angles
Global CT Scan and PET Scan Sales Market 2017 Philips, Toshiba, Shimadzu, Hitach …
Global CT Scan and PET Scan Sales Report 2017 Major Manufacture Analysis Of CT Scan and PET Scan Sales Market 2017. The report presents a Depth Research of the market growth factors and drivers. A Deep research of the CT Scan and PET Scan Sales Market limitations and the opportunities enable the user to make the future projection. The report also includes Company Profile, based on the manufacturing methods, technological
CT Scan and PET Scan Global Market expected to reach 7360 million $ by 2021.
Press Release: Pune, India- August , 2017 Global CT Scan and PET Scan Market Rport 2017  Description: With the slowdown in world economic growth, the CT Scan and PET Scan industry has also suffered a certain impact, but still maintained a relatively optimistic growth, the past four years, CT Scan and PET Scan market size to maintain the average annual growth rate of 2.76% from 6000 million $ in 2013 to 6510