Press release
New Videos demonstrate the ease of using Portable Infrared Analyzers for On-Site Oil in Water Measurements
InfraCal TOG/TPH Analyzers provide on-site oil in water measurements in under 15 minutes
Based on field-proven infrared technology, the InfraCal TOG/TPH Analyzers -- Model HATR-T2 or the Model CVH – depending on the solvent selected for the extraction process – provide accurate, on-site measurement of total oil/grease concentration in the wastewater. Typical analysis time is 10-15 minutes, including the extraction procedure. Measurement data obtained with the Model HATR-T2 correlates to EPA Method 1664 and with the Model CVH to ASTM Methods D 7066-04 and D3921-11 and EPA Methods 413.2 and 418.1.
Over 2,500 InfraCal TOG/TPH Analyzers are currently in worldwide use analyzing produced water on off-shore and on-shore oil platforms, as well as monitoring refinery and industrial plant wastewater effluents. They provide the assurance that oil/grease content of the wastewater will meet appropriate regulatory requirements.
To view the videos, go to http://www.wilksir.com/togtph-videos.html or for further information, contact: Wilks Enterprise, Inc., 25 Van Zant Street, Ste. 8F, E. Norwalk, CT 06855 USA, TEL: 203-855-9136, FAX: 203-838-9868, Email: info@wilksir.com; or visit our Web Site -- www.wilksir.com, or download information directly at http://www.wilksir.com/oilgrease-analyzers.
# # # #
For further press information or images, please contact Carol Tunick, VP – Marketing, at 203-855-9136 or email:
ctunick@wilksir.com. Wilks and InfraCal are trademarks of Wilks Enterprise, Inc.
Headquartered in E. Norwalk, Connecticut, Wilks Enterprise specializes in easy-to-use, portable mid-infrared analyzers for specific measurement applications. All Wilks analyzers have been specifically designed for on-site use by non-technical personnel and are used for a wide variety of applications in the biofuels, environmental, petrochemical, quality control, and manufacturing industries. These portable analyzers enable analytical measurements to be made in the field, helping to eliminate the wait for off-site lab results.
Carol Tunick
Wilks Enterprise, Inc.
25 Van Zant Street, Ste. 8F
East Norwalk, CT 06855
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release New Videos demonstrate the ease of using Portable Infrared Analyzers for On-Site Oil in Water Measurements here
News-ID: 222765 • Views: …
More Releases from Wilks Enterprise, Inc.
Accurately Measure Hydrocarbon (Oil/Grease) Levels in Produced Water in Under 15 …
E. Norwalk, CT, March 29, 2012 -- Determining total hydrocarbon or oil/grease levels to ensure compliance with regulatory permit requirements for discharging produced water is a worldwide problem facing the oil and gas industry. Ensuring compliance with these regulations and avoiding fines for non-compliant discharges requires more frequent wastewater measurements to determine the total hydrocarbon concentration. The portable InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc.…
On-Site Measurement of Oil and Grease Levels in Hydraulic Fracturing Water
The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off-site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote laboratory results to determine the oil level can take several days to…
Effects of Biodiesel Feedstocks on Infrared Blend Measurements is Featured in Ne …
A new White Paper published by Wilks Enterprise addresses the common concern among biodiesel blenders and distributors as to whether or not biodiesel made from different feedstocks such as soy, waste vegetable oil or palm oil will affect the blend measurement. The data presented in the White Paper, as well as the chemistry, shows that infrared measurements offer a reliable analytical technique for checking biodiesel blend.
Fuel blend analysis is…
More Releases for InfraCal
Accurately Measure Hydrocarbon (Oil/Grease) Levels in Produced Water in Under 15 …
E. Norwalk, CT, March 29, 2012 -- Determining total hydrocarbon or oil/grease levels to ensure compliance with regulatory permit requirements for discharging produced water is a worldwide problem facing the oil and gas industry. Ensuring compliance with these regulations and avoiding fines for non-compliant discharges requires more frequent wastewater measurements to determine the total hydrocarbon concentration. The portable InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc.…
On-Site Measurement of Oil and Grease Levels in Hydraulic Fracturing Water
The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off-site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote laboratory results to determine the oil level can take several days to…
Effects of Biodiesel Feedstocks on Infrared Blend Measurements is Featured in Ne …
A new White Paper published by Wilks Enterprise addresses the common concern among biodiesel blenders and distributors as to whether or not biodiesel made from different feedstocks such as soy, waste vegetable oil or palm oil will affect the blend measurement. The data presented in the White Paper, as well as the chemistry, shows that infrared measurements offer a reliable analytical technique for checking biodiesel blend.
Fuel blend analysis is…
New Easy-to-Use ASTM Test Method for Measuring Soot Levels in Diesel Engine Lubr …
E. Norwalk, CT June 30, 2011 – Wilks Enterprise is pleased to announce that the InfraCal Soot Meter now gives users an approved ASTM testing method for measuring the percent level of soot in diesel engine lubricating oil. In late June, ASTM issued Method D7686-2011 entitled “Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) instrument.”
With the InfraCal Soot Meter, rapid,…
New Video features Portable Infrared Analyzers for On-Site Measurement of Oil in …
East Norwalk, CT, June 10, 2011 – Wilks Enterprise is pleased to announce a new video featuring the measurement of oil and grease in water/soil with easy-to-use portable infrared analyzers. This 3-minute video demonstrates how on-site measurements with the InfraCal TOG/TPH Analyzers can save time and money, as they allow oil and grease levels in wastewater to be determined in under 15 minutes. These measurements help ensure compliance…
On-Site Ethanol in Gasoline Blend Measurements in Under a Minute
East Norwalk, CT – May 17, 2011 -- As more mandates for higher blends of ethanol in gasoline come into effect, terminal managers, distributors, fleet managers, regulators and tax enforcement agencies need a quick and accurate way to measure the percent ethanol in gasoline to ensure a correct blend. The InfraCal Ethanol Blend Analyzer from Wilks Enterprise, Inc. is portable, rugged, compact and specifically designed for use by non-technical personnel.…
