openPR Logo
Press release

GOEPEL electronic integrates graphic Operation Panels for Control of Chip Embedded Instruments

12-03-2011 11:26 AM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

GOEPEL electronics

GOEPEL electronics

During productronica in Munich, GOEPEL electronic will be announcing the integration of special features for the creation of graphic control panels in its Boundary Scan software platform SYSTEM CASCON™.

The new options are primarily configured for interactive graphic user-interfaces on chip-embedded instruments and also offer users the possibility to freely define application specific control panels. Visualisations and controls that are combined in this way not only improve efficiency levels during the design validation, they also facilitate debugging in the event of faults as well as operator management in the production tests.

"Along with the control of the different protocol and transport layers, above all else, a key factor in the increasing industrial use of chip-embedded instruments is the simple and intuitive usability of the appropriate target function through the appropriately adapted user interfaces. We are now able to offer a universal and flexible solution to this problem" says Stefan Meissner, Marketing Manager with GOEPEL electronic. "With this approach we are therefore primarily promoting the area of the FPGA Assisted Test where we are currently the only service provider in the world which offers a uniform concept consisting of instrument IPs, integrated system administration, automatic programme generation and now an interactive user interface as well."

The new graphic control panels are based on technical extensions to the special JTAG/Boundary Scan programming language CASLAN™ (CASCON Language) and are created during runtime through the corresponding commands. In addition to a wide range of visualisations of measured values or vectors, control elements and input windows are freely definable. This results in the full universality of the solution through to the automatic creation of the source code. As CASLAN™ is the central control language for all test access technologies, the graphic control panels can also be used for other procedures such as Boundary Scan tests, processor emulation tests or core assisted programming. This means interactive operator panels can be realised for process-control.

About GOEPEL electronic:
GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 180 employees and generated a revenue of more than 22 Million Euro in 2010 (ca. $31Mio). GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release GOEPEL electronic integrates graphic Operation Panels for Control of Chip Embedded Instruments here

News-ID: 202883 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for Boundary

Edward Prentice Now Offers Boundary Resolution Services in Kent
Edward Prentice Now Offers Boundary Resolution Services in Kent. For customers seeking help and advice with boundary disputes on their property, Edward Prentice provides RICS expert services. Who is Edward Prentice? Edward Prentice is a commercial, industrial, and agricultural real estate specialist working as a consultant property expert in Tonbridge, Kent. With a background as a General Practice Surveyor with RICS (Royal Institute of Chartered Surveyors), Edward is known for his innovative,
Global Boundary Microphones Market Status and Outlook (2020-2025)
Global Info Research offers a latest published report on Boundary Microphones Analysis and Forecast 2019-2025 delivering key insights and providing a competitive advantage to clients through a detailed report. This report focuses on the key global Boundary Microphones Concentrate players, to define, describe and analyze the value, market share, market competition landscape, SWOT analysis and development plans in next few years. Click to view the full report TOC, figure and tables: https://www.globalinforesearch.com/reports/515777/boundary-microphones Market
Boundary breaking e-commerce start-up, Delloop announced today
Lisbon, January 10th 2020: After several month’s research and development, the company, which was, until recently, in stealth mode, is now poised to go to market in Q2 2020. Delloop focuses on solving issues facing E-commerce as an industry - inefficiency in last-mile delivery, costly customer acquisition, customer churning, and spiralling support and marketing costs. By taking a holistic inclusive approach Delloop technology delivers powerful features and cost savings
Corelis Introduces New Version 8.4 Boundary-Scan Tool Suite
New software update includes Cluster Wizard, Dynamic GPIO control, and new CPU support packages. Cerritos, California, December 16, 2016 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of version 8.4 of its ScanExpress™ Boundary-Scan Tool Suite. The new software update features a new ScanExpress TPG Cluster Wizard for logic cluster test creation, support for dynamic JTAG controller GPIO control in ScanExpress Debugger,
XJTAG releases boundary scan for Teradyne TestStation
Cambridge, UK, 21 October 2014 — XJTAG, a world leading supplier of boundary scan technology, today announced the release of the XJLink2-CFM and XJLink2-CFMx. The new modules provide Teradyne users with integrated access to XJTAG’s powerful test and programming tools, operating under the control of the TestStation™ test program. With a JTAG solution installed internally to the TestStation In-Circuit Test System, the complexity and recurring cost impact of fixture-based test can
World’s first Boundary Scan Controller with Wireless LAN Interface
GOEPEL electronic announces the introduction of SFX/WSL1149-(x), the world’s first controllers for Wireless LAN (WLAN) as an addition to the company’s Boundary Scan hardware platform SCANFLEX®. The new Boundary Scan controller series provides a Triple Stream/Dual Band WLAN interface for theoretical transmission speed up to 450 Mbps, enabling wireless utilisation of the newest Embedded System Access (ESA) technologies for testing, programming and debugging of complex chips, boards, and entire systems. “Our goal