Go Power Systems Launch New GPR557 Engine Dynamometer System

Plymouth, MI, USA, 30 November 2011: Go Power Systems, a division of the internationally renowned Dynamometer manufacturer Froude Hofmann, is proud to announce the launch of the innovative GPR557 dynamometer system for the performance racing engine market. Featuring the “Dual Drive” philosophy and the new and unique linear control valve (LCV) technology, the GPR557 results in more accurate tests, offering engine builders and tuners, race car teams and individuals a high degree of flexibility and the opportunity to optimize the performance from race tuned engines.

The new system comprises a GPR 557 water brake dynamometer (1500HP) absorber, GPS6000 dynamometer data acquisition and control system, engine dynamometer test stand and engine cart. The dynamometer is constructed in high strength phosphor bronze and features clockwise and counter clockwise rotation, with electronic strain gauge 2,000lbs load cell and a 60 tooth gear speed sensor. The absorber features a through shaft with the option to install a single and dual starter system directly on the end of the shaft.

Flexibility is a key feature of this new test system. Engineers at Go Power Systems have designed the GPR557 as a Dual Drive dynamometer system. Until now engine builders and tuners have had to choose between drive shaft coupled and direct (bell housing) coupled set ups when it came to transferring power between engine and dyno. The new GPR557 offers both as part of the Dual Drive system so that the choice can be based on the test requirements and customer preferences all within one dyno test system. The bell housing adaptor plate fits most standard patterns and can be drilled to suit others. The unique linear control valve (LCV) couples the inlet water valve directly to a DC motor so that the valve reacts immediately to setting changes, ensuring smooth and stable control of the inlet water flow to the absorber. This new development does not suffer from the hysteresis effect found in competitive stepper motor systems thereby avoiding delay in response leading to much more accurate testing results. To further enhance stability of control the dyno and engine are vibration isolated from the LCV by integrated elastomeric elements.. The new LCV also has the added advantage that it enables better load control at low rpm due to the valve being able to be completely shut off.

The GPS6000 data acquisition and control system contains a multifunctional signal conditioning module to interface digital and analog inputs, outputs and frequency channels. The channel count is expandable to suit even the most demanding applications.

While the standard GPR557 systems is supplied in gunmetal grey/burnt yellow, Go Power Systems is also offering their systems to be delivered in a two tone paint scheme to further enhance their customer’s brand and corporate identities.

The GPR557 performance race engine dynamometer system is manufactured directly in Froude Hofmann/Go Power Systems’ facilities in Detroit, home of the automotive industry in North America. This means that key spares, and direct support, are immediately on hand to service any requirements quickly, without the potential for excessive lead times for spares coming from the Far East or other overseas markets.

- ends -

Go Power Systems was acquired by the long established engine dynamometer manufacturer, Froude Hofmann in 2002.

Froude Hofmann has manufactured the renowned F24 hydraulic dynamometer which has been used for many years by virtually all of the NASCAR race teams. This gives Froude Hofmann / Go Power System a pedigree ideally suited to develop this new engine dynamometer package.

The technology and heritage of Froude Hofmann dynamometer systems have been combined to produce the new GPR557 Go Power engine dynamometer system for the performance race car market.

USA Enquiries: Go Power Systems/Froude Hofmann Inc. 45225, Polaris Court, Plymouth, Michigan, USA 48170. Tel: 734 – 416- 8000 Fax: 734–416-9113 Email: info@gopowersystems.com
http://www.gopowersystems.com

Australasia Enquiries: Peter Skalak. General Manager. Froude Hofmann Australia. 5 Kelletts Road, Rowville VIC 3178, Australia. Tel: +61 (0)3 9213 8600 Fax: (0)430 118253
Email: PSkalak@froudehofmann.com

International Enquiries: Simon Drain. Froude Hofmann. Blackpole Rd, Worcester, WR3 8YB. UK.
Tel: +44 (0) 1905 856800 Fax: +44 (0)1905 856 811 E-mail: SDrain@froudehofmann.com
http://www.froudehofmann.com

UK Press Contact:
Eileen Holmes-Ievers. In Press Public Relations Ltd. St John's Chapel, High Street, Lambourn, Berkshire. RG17 8XL. Tel. +44 (0)1488 674200 E-mail: eileen@inpress.co.uk
http://www.inpress.co.uk Twitter: http://www.twitter.com/InPressPR

This release was published on openPR.