openPR Logo
Press release

Boundary Scan Platform SCANFLEX® extends Integration of Bus Interface Tests

09-02-2011 08:18 AM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

I/O module SFX-9305/R

I/O module SFX-9305/R

GOEPEL electronic, world-class vendor of JTAG/Boundary Scan solutions introduces SFX-9305/R, another I/O module within the frame of the Boundary Scan hardware platform SCANFLEX®.
The new member to the module series provides five ports for the universal test of industrial interfaces, which can be completely electrically isolated per relays. Users are now able to combine functional test procedures for bus interfaces such as LAN, USB, CAN or LIN with vector-less working test methods on a unique platform. In addition to increased fault coverage, the new integration opportunities result in reduced test costs by saving separate process steps.

“Combined test strategies based on deep integrations are an important issue in strategic test planning for our customers says,” Thomas Wenzel, Managing Director of GOEPEL electronics’ Boundary Scan Division. “Simultaneously, we strengthen our OEM co-operations with leading ATE vendors.”

The SFX-9305/R module provides five independent, freely configurable bus ports. The target is physically accessed by a selection of “Bus Access Cables” (BAC). The current configuration is automatically identified, whereby BAC type and quantity are freely definable. By parallel operation of several SFX-9305/R modules the number of available bus ports is practically nearly unlimited. Supported interfaces are LAN (10/100/1000), USB 2.0 (Host/Slave), Bluetooth, CAN (high-speed/low-speed), LIN, RS232 and RS422/458. Additional interfaces are being developed. The available interface functions contain the step-wise handling of protocol layers including bi-directional data transfer. Hence, users can completely control the bus target without additional driver software and clearly identify faults.

SFX-9305 can be combined with all SCANFLEX® controllers on the basis of PCI, PCI Express, PXI, PXI Express, FireWire, USB and LAN. It is fully supported in the industrially leading JTAG/Boundary Scan software SYSTEM CASCON™ from version 4.5.x on. Module programming and handling of test program data are based on user-friendly CASLAN instructions. CASLAN is the currently the most powerful Boundary Scan programming language with several hundred commands supporting IEEE1149.1, IEEE1149.4, IEEE1149.6, IEEE1532, and JESD71 as well as mixed signal operations and VarioTAP® for emulation test as well as control of chip embedded instruments.

About GOEPEL electronic:
GOEPEL electronic is a worldwide leading vendor of professional electronic and optical test and inspection systems. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 180 employees and generated a revenue of more than 22 Million Euro in 2010 (ca. $31 Mio). GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Boundary Scan Platform SCANFLEX® extends Integration of Bus Interface Tests here

News-ID: 190092 • Views: 1181

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for I/O

Xenoss to participate at AdExhanger's Programmatic I/O 2020
Xenoss, MarTech software consulting and development company, will be participating in the annual AdExhanger's Programmatic I/O conference. This event attracts thousands of leading experts in the AdTech industry, publishers, advertising agencies, and marketing executives. Programmatic I/O 2020 will be held virtually for six days: Oct. 5, 7, 13, 15, 19, and 21. This year's summit will focus on several areas such as Programmatic Essentials for Buy and Sell Sides, Identity & Data,
I/O Connectors Market Trends and Forecast by 2026
In a recent study published by QY Research, titled "Global I/O Connectors Market Research Report", analysts offer an in-depth analysis of the global I/O Connectors market. The study analyzes the various aspects of the market by studying its historic and forecast data. The research report provides a Porters five force model, SWOT analysis, and PESTEL analysis of the I/O Connectors market. The different areas covered in the report are I/O
New M8x1 I/O-junctions with active logic-function
Halver, 27 September 2017 – The connectivity specialist ESCHA is again presenting a world premiere at this year’s SPS IPC Drives. In Hall10, Stand 414 of the Nuremberg tradeshow booth, the new M8x1 I/O-junctions with active logic-function in various versions will be on display for the first time. These are extremely compact devices; placing intelligence close to sensors transmitting preprocessed signals to a central control unit. The individual slots are
Global I/O Connectors Market Research Report 2017
This report studies I/O Connectors in Global market, especially in North America, Europe, China, Japan, Southeast Asia and India, focuses on top manufacturers in global market, with capacity, production, price, revenue and market share for each manufacturer, covering Amphenol 3M Molex Cvilux Corporation HARTING TE Connectivity FCI Electronics AVX Corporation OMRON Control Technology TTI Request Sample Report: http://www.reportbazzar.com/request-sample/?pid=888332&ptitle=Global+I%2FO+Connectors+Market+Research+Report+2017&req=Sample Lairdtech WERNER WIRTH Halytech Meritec Moxa Japan Aviation Electronics Industry Royal DSM SilverStone PHOENIX CONTACT Market Segment by Regions, this report splits Global into several key Regions, with production, consumption, revenue, market share and growth
Conductivity Sensing I/O Board Precisely Measures Aqueous Liquid Conductance
Mosaic Industries, Inc. has introduced a new plug-in module, the Conductivity Sensing Wildcard, for measuring conductivity in aqueous solutions. This tiny 2" by 2.5" board is a member of the Wildcard series of mezzanine boards that connect to Mosaic embedded computers, microcontrollers and instrument controllers. The Conductivity Sensing Wildcard is a precision instrument for measuring the electrical conductivity of ionic solutions. It converts the solution conductivity to an analog
EtherCAT I/O Module
Flexible I/O Module for EtherCAT also available as board-level product The new EtherCAT I/O Module "ETCio 100" from IXXAT enables the quick and easy connection of analog and digital input and output signals to EtherCAT systems – whether in component test stands, mobile applications or for industrial automation applications. The device has two analog inputs and four analog outputs with a 12-bit resolution. The analog output voltage range can be individually programmed