Press release
GEA presents state-of-the-art pharmaceutical spray drying at two trade shows: PowTech/TechnoPharm and CPhI
Production at the GEA Niro PHARMASDTM PSD-4 in the GEA NiroPharma Test Station. © GEA Niro.
With a substantial legacy of serving the pharmaceutical industry with spray drying solutions, GEA Niro spray drying technology is generally recognized as a market leader, delivering cutting-edge solutions. The company offers both complete spray drying installations as well as a full range of spray drying services to companies working with the development of spray dried pharmaceuticals and pharmaceutical grade products. Services cover the complete development cycle - from the initial proof of concept tests to full-scale production of clinical trial materials and commercial prod-ucts under cGMP conditions.
Complimentary consultancy
Company representatives with in-depth technological expertise in the field of pharmaceutical spray drying will be available at the trade shows to offer insight into the GEA Niro technology, its benefits and the potential of pharmaceutical spray drying. Complementary consultancy on the topic of how the GEA Niro technology may best be exploited to its full capacity in any given case will be pro-vided at the trade shows.
Spray dryer for aseptic production
At PowTech/Technopharm, GEA Niro will present its new state-of-the-art spray dryer for aseptic pharmaceutical production, ASEPTICSDTM. Based on a new concept, the spray dryer is sterilised using steam: a method that meets regulations and guidelines put forward by the US Food and Drugs Administration (FDA), the European Medicines Agency (EMA) and other such agencies and has consequently become the preferred method in the pharmaceutical industry. The method al-lows for the production of aseptic free-flowing powders in a single step. It also makes ample use of the benefits of spray drying over other production forms: e.g. powder engineering properties as well as the cost advantages of spray drying as opposed to other technologies.
About pharmaceutical spray drying
Spray drying is a fast and gentle way to produce free-flowing powders and a process that allows very precise particle formation. The drying takes place in seconds and at temperatures that pre-serve the product’s active ingredients. Spray drying can be applied in pharmaceutical production to obtain several benefits, including increased bioavailability, controlled release or taste masking and aseptic production. It can also be applied for production of fine powders for inhalation or other applications. It can be applied in the production of APIs, excipients as well as of solid dosage for-mulations of final drugs.
To find us:
• PowTech/TechnoPharm: Visit GEA Niro in Hall 5/5-250
• CPhI: Visit GEA Niro in Hall 4, 1, Booth G58
About GEA Niro
GEA Niro is a world leader in spray drying technology with a long history in the pharmaceutical industry. The supply includes laboratory-scale spray dryers for R&D and spray dryers for full-scale production under cGMP conditions. GEA Niroalso offers assistance with spray drying process de-velopment and cGMP contract spray drying. The expertise includes technologies for processing API, excipients and solid dosage formulations by spray drying, agglomeration, encapsulation and spray congealing. For further information please visit www.niro.com
About GEA Process Engineering
GEA Process Engineering develops, designs, and markets production plant equipment and processes for the dairy, brewery, food, pharmaceutical and chemical industries. With sales close to EUR 1.3 billion in 2010 and 4,800 employees working in more than 40 countries, GEA Process Engineering is recognized as a world leader within liquid processing, concentration, industrial drying, powder processing & handling, emissions control, solid dosage forms & sterile products, and aseptic packaging. GEA Process Engineering is a business segment of GEA Group, headquartered in Germany. For further information visit www.geap.com
Further editorial information from:
Steve Jordan - The Words Workshop Ltd.
26 Swanwick Lane
Milton Keynes
MK10 9LD
Tel: ++44 1908 695500Fax: ++44 1908 690099
Email: steve@thewordsworkshop.co.uk
Web: http://www.thewordsworkshop.co.uk
All business enquiries to:
GEA Niro
SørenTerp Madsen
Areas Sales Manager &Product Manager
Gladsaxevej 305
DK-2860 Soeborg
Denmark
Tel./Office: +45 3954 5454
Email: soren.madsen@geagroup.com
Web: http://www.niro.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release GEA presents state-of-the-art pharmaceutical spray drying at two trade shows: PowTech/TechnoPharm and CPhI here
News-ID: 187678 • Views: …
More Releases from GEA Niro
GEA Niro drying technology at ACHEMA 2012
At ACHEMA (June 18-22 June, Frankfurt, Germany), GEA Process Engineering - the company behind the world-recognised GEA Niro spray and fluid bed drying technologies – will be present to promote GEA Niro drying systems and discuss how working with GEA helps customers meet the strictest requirements to product quality, plant efficiency and safety, and sustainable production.
The company will be showing some of its small-scale units at the booth including:…
CFD collaboration between GEA Niro and DTU
GEA Niro is working hand-in-hand with the Technical University of Denmark (DTU), to simulate the fluid dynamics that take place within a full-sized spray dryer. This is done using a scaled down model with water instead of air. The process allows experiments to be performed at a laboratory level that would otherwise require full-scale equipment of several meters in all dimensions. The data gathered helps GEA Niro refine the…
GEA Niro Pharmaceutical Spray Drying Facility
GEA Niro in Denmark has one of the major Pharmaceutical Spray Drying - spray drying under cGMP conditions - facilities worldwide. The facility, which was first opened as a demonstration plant to support sales of Pharmaceutical Spray Drying installations, is offering spray drying process development and contract manufacturing of pharmaceuticals or pharma-grade products. This allows customers to work on product formulations, test the feasibility of a spray drying, and conduct…
Dan Kaffe orders instant coffee plant from GEA Niro
GEA Niro has announced a new approx. euro 2 million order for spray drying technology for the Dan Kaffe factory in Johor Bahru in Malaysia. The order is for a complete spray drying plant to increase production of powdered coffee from the factory.
GEA Niro has a long business relationship with Dan Kaffe having supplied the company’s first complete instant coffee plant back in 1993. This new agreement was…
More Releases for Production
Fertilizer Catalyst Market to Undertake Strapping Growth During 2018 to 2028(Seg …
Global Fertilizer Catalyst Market Introduction
Rising demand for catalysts is being witnessed from the fertilizer industry. Fertilizer catalysts are various kinds of metal oxides which are used for increasing the reaction rate in the fertilizer industry. Fertilizer catalysts are primarily used during ammonia production. Fertilizer catalysts find applications in processes including methanol production, ammonia production, formaldehyde production, syngas production and others. The activity of the fertilizer catalyst decides the yield and…
Fertilizer Catalyst Market to Showcase Vigorous Demand during the Period until 2 …
Global Fertilizer Catalyst Market Introduction
Rising demand for catalysts is being witnessed from the fertilizer industry. Fertilizer catalysts are various kinds of metal oxides which are used for increasing the reaction rate in the fertilizer industry. Fertilizer catalysts are primarily used during ammonia production. Fertilizer catalysts find applications in processes including methanol production, ammonia production, formaldehyde production, syngas production and others. The activity of the fertilizer catalyst decides the yield and…
Polyethylene Market Macroeconomic Analysis Includes Product Capacity, Production …
Market Research Future Published a Half Cooked Research “Global Polyethylene Market Research Report – Forecast to 2027” – Market Analysis, Scope, Stake, Progress, Trends and Forecast up to 2027.
BASF SE, BP Plc, INEOS, Saudi Basic Industries Corporation, Petronas, China National Petroleum Corporation, China Petroleum & Chemicals Corporation, National Petroleum Company , Polimeri Europa ,Mitsui Chemicals Inc,Exxon Chemicals, Formosa Plastics Limited, Sumitomo Chemicals, DuPont, Chevron Philips,…
Collaborative Production Management Market : Production & Consumption Profession …
Global Collaborative Production Management Market: Snapshot
Collaborative production management products offer integrated solutions to the manufacturing systems, which helps in providing easy execution, real-time visibility, reporting, and tracking of the complete production processes. The use of collaborative production management solutions helps in reducing the cost of production through effective scheduling and management. In addition, the growing need of industries to ensure a high operational efficiency is estimated to accelerate the growth…
Semiconductor Production Equipment Market - Increasing Electronics Production Wo …
Global Semiconductor Production Equipment Market: Snapshot
Global market for semiconductor production equipment has been covered under the scope of this report. Semiconductor production equipment (SPE) is used in possibly the most advanced and complex manufacturing process in the world, which is, the production of semiconductor devices. Semiconductor products, such as memory devices and microprocessors are used in a wide range of devices such as personal computers, consumer electronics and telecommunications equipment.…
Vacuum Pumps Market Forecast by Production Value, Capacity and Production
Big Market Research Add New “Vacuum Pumps Market” Research Report to It’s a Database.
Request sample report @ https://goo.gl/cajJ1x
The report provides a basic overview of the Vacuum Pumps industry including definitions, classifications, applications and industry chain structure. And development policies and plans are discussed as well as manufacturing processes and cost structures.
This report studies Vacuum Pumps focuses on top manufacturers in global market, with capacity, production, price,…
