Press release
Plating on Plastic Market to exceed USD 750 mn by 2024|BIA Kunststoff, C. Uyemura, Conventya, Dow Chemical, Galva Decoparts, JCU Corporation, MPC plating, and Okuno International
Plating on Plastics (POP) Market
Plating on plastics market from ABS plastic type may observe significant gains up to 6.5% in projected timeframe. ABS is a copolymer that contains rubber, making it easy for etching and raw material adhesion, resulting in satisfactory plating output. This blend contains between 40% and 60% of ABS, with the rest consisting of PC. They offer higher strength along with other properties including ductility. They are used in high temperature performance areas including wheel covers and are projected to witness a strong growth potential. They are used electrical & electronics, where high thermal stability is required having wide application scope would further propel POP industry growth.
Request for a sample copy of this report @ https://www.gminsights.com/request-sample/detail/366
According to a new research report by Global Market Insights, Inc. Plating on Plastic (POP) Market size is set to surpass USD 750 million by 2024.
Growing high-performance & lightweight plastics demand owing to design flexibility and increase in automobile efficiency is anticipated to drive plating on plastics market growth. High performance plastics & blends offers vehicle manufacturers flexibility to design numerous shapes and offer strength comparable to that of steel, which also supports in reducing vehicle weight and restraint pollution levels.
Copper and nickel are generally used together for all chrome plating OEMs and domestic fitting applications. Copper plating is done on plastic substrate to provide electrical conductivity and decorative coating. Nickel plating helps in providing wear resistance, enhancing corrosion resistance and increasing surface thickness. Chrome plated plastics offers advantages including good surface finish, rust resistance and aesthetic appeal thus, promoting plating on plastics product demand.
Germany plating on plastics market from automotive is anticipated to exceed USD 65 million by 2024. Increasing demand for aesthetic appearance by OEMs to differentiate automobile design supported by properties including corrosion and wear resistance is likely to favor product demand. Presence of various regional service providers along with numerous high-end automobile manufacturers including BMW, Mercedes, Volkswagen, Renault, and Volvo will propel plating on plastics market.
Make an inquiry for purchasing this report @ https://www.gminsights.com/inquiry-before-buying/366
Availability of skilled labor along with favorable government policies regarding FDI is likely to attract automobile manufacturers to set up production bases in Asia Pacific, which may propel regional industry growth. Increase in per-capita disposable income and population growth mainly in India & China is anticipated to drive regional plating on plastics market in projected timeframe.
Technology innovation in polymer industry has resulted in metal substitution by plastics in end-use industries including automotive, aerospace, domestic appliances, and electronics. Plastics provide advantages like weight reduction, design flexibility, and fabrication ease. The chemical process development for surface preparation of ABS enabled good bonding characteristics between the metallic coating and plastic substrate was a major breakthrough leading to plating on plastics industry growth.
Partial Chapter of the Table of Content:
Chapter 3 Plating on Plastics (POP) Industry Insights
3.1 Industry segmentation
3.2 Industry size & forecast, 2013 - 2024
3.3 Industry ecosystem analysis
3.3.1 Vendor matrix
3.3.2 Distribution channel analysis
3.3.2.1 Collaboration/partnership
3.3.2.1 Distributors
3.3.2.1 Service providers
3.4 Regulatory/Legislative Framework
3.4.1 REACH
3.4.2 EPA
3.4.3 OSHA
3.5 Innovation & sustainability
3.5.1 Issues with hexavalent chromium
3.5.2 Alternatives to hexavalent chromium
3.6 Raw material trends, 2013 - 2024
3.6.1 Copper
3.6.2 Nickel
3.6.3 Chromium
3.7 Industry impact forces
3.7.1 Growth drivers
3.7.1.1 Europe: Increase in lightweight component demand for automobile production
3.7.1.2 Asia Pacific: Positive outlook on automobile industry
3.7.2 Industry pitfalls & challenges
3.7.2.1 Plastic design and process cost concerns
3.7.2.2 Stringent environmental concerns
3.8 Growth potential analysis, 2017
3.8.1 Emerging business models
3.8.1.1 New product launch
3.8.1.2 Acquisition
3.9 Porter’s analysis
3.10 Company market share analysis, 2017
3.10.1 Industry POP capacity, by company
3.10.2 Strategic dashboard
3.11 PESTEL analysis
3.12 Industry insights obtained via primary research
3.12.1 Overall market outlook
3.12.2 Plastic trends
3.12.3 Finish type trends
3.12.4 Key buying criteria
3.12.5 Design trends
Browse complete Table of Contents (ToC) of this research report @ https://www.gminsights.com/toc/detail/plating-on-plastics-POP-market
China plating on plastics market from domestic fittings is observed to surpass USD 10 million in the estimated timeframe. Heavy grade plastics are extensively used for domestic fittings applications to ensure superior appearance. Growing trend for colored bathroom fixtures due to its appearance, hygiene, wear resistance and costs is likely to drive POP market growth.
Contact Us
Contact Person: Arun Hegde
Corporate Sales, USA
Global Market Insights, Inc.
Phone: 1-302-846-7766
Toll Free: 1 888-689-0688
About Global Market Insights
Global Market Insights, Inc., headquartered in Delaware, U.S., is a global market research and consulting service provider; offering syndicated and custom research reports along with growth consulting services. Our business intelligence and industry research reports offer clients with penetrative insights and actionable market data specially designed and presented to aid strategic decision making. These exhaustive reports are designed via a proprietary research methodology and are available for key industries such as chemicals, advanced materials, technology, renewable energy and biotechnology.
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Plating on Plastic Market to exceed USD 750 mn by 2024|BIA Kunststoff, C. Uyemura, Conventya, Dow Chemical, Galva Decoparts, JCU Corporation, MPC plating, and Okuno International here
News-ID: 1874596 • Views: …
More Releases from Global Market Insights, Inc.
Hepatitis B Vaccine Market Set to Surpass $12 Billion by 2034
The global hepatitis B vaccine market is poised for significant expansion over the next decade, fueled by rising liver disease cases, expanded immunization coverage, and advancements in vaccine development. Valued at USD 6.7 billion in 2024, the market is projected to reach USD 7.3 billion in 2025 and surge to USD 12 billion by 2034, reflecting a healthy compound annual growth rate (CAGR) of 5.7%.
A major driver behind this growth…
Rare Sugar Market Top 3 Trends, Covid-19 Outbreak, Factors Driving, Threats, Cha …
Rising awareness regarding health & fitness and the subsequent shift in consumer trends towards low-calorie sweeteners will boost rare sugar market share over the forecast spell. Recent years have marked a steady rise in the prevalence of cardiovascular ailments, diabetes, and obesity, among other chronic conditions, which have triggered a massive change in consumer perceptions towards health.
This in turn has led to a surge in demand for various functional foods…
Global Selenium Yeast Market Industry Assessment, Trends, Competitive Landscape, …
The selenium yeast market is anticipated to register substantial gains on account of rising inclination towards organic additives in animal nutrition, with an aim to improve livestock health and production. Consumers are steadily becoming aware of the downsides associated with using synthetic additives. As a result, they are preferring selenium yeast feed grades over other counterparts to provide balanced nutrition to their livestock.
According to Global Market Insights Inc estimates…
Power Distribution Component Market Share, Size, Trends by 2025 | Leading Key pl …
Global Power Distribution Component Market Report offers market overview, segmentation by types, application, countries, key manufactures, cost analysis, industrial chain, sourcing strategy, downstream buyers, marketing strategy analysis, distributors/traders, factors affecting market, forecast and other important information for key insight.
Request a sample of this research report @ https://www.gminsights.com/request-sample/detail/3091
Voltage rating have acted as a standard industry protocol toward the installation of power components reliant on regulatory preference, deployment areas, and the group…
More Releases for POP
How HMG Pop Up Paper Became the Happiest Pop Up Greeting Cards Manufacturer
HMG Pop Up Paper, founded in 2013 by two visionary interior designers, has evolved into an internationally acclaimed manufacturer. Their commitment to spreading joy through handcrafted cards and a supportive workplace culture has made them a leader in the industry.
Image: https://i.imgur.com/v5BJDQT.png
Vietnam - July 23, 2024 - HMG Pop Up Paper, a renowned manufacturer of pop-up greeting cards, celebrates its journey from a small local business to a globally recognized…
The First Ever K-Pop Festival in New Malden: A Grand Celebration of Korean Pop C …
Over 2,000 people attended the 2019 Korean Festival in New Malden, leaving a lasting impression on the community. Reflecting on the bustling atmosphere of New Malden High Street during the festival, one wonders: could New Malden, known as a Korean town, establish a firmer presence in the UK by making this festival an annual tradition?
Image: https://i.imgur.com/ST9PdSJ.jpeg
Kiyoung Kim, CEO of Tree Stone Butchers, envisioned the Tree Stone K-pop Cultural Festival as…
Colourful Pop-Art Edition
markilux is extending its cover fabric collection with ten refreshing "visutex patterns"
Last year, the latest markilux awning cover fabric collection was launched. Its dynamic concept was surprising: in the future, the collection will be updated regularly by the addition of trendy new fabrics. This year a first edition of new "visutex patterns" is being launched in a colourful pop-art style.
According to markilux, the "collection one" is a "breathing" awning fabric…
POP Display Market SWOT Analysis by Leading Key Players: Promag, Repack Canada, …
The Global POP Display Market report sheds light on noteworthy industry trends, emerging issues and key areas of opportunity that help POP Display manufacturers decide top strategic priorities in next few years. The executive outlook presented in POP Display research reflects the overall industry, with respondents surveyed from different geographies, company sizes, and industry segments. The study starts with an introduction and macro-economic impact on export-import (EXIM), consumption and production…
Young Pop-star iblamealiyah is Giving a New meaning to The "Pop Rock" genre
iblamealiyah; born Aliyah Kai Bennani, is changing the game with her brand new song "GOODBYE". With a fresh melody, exquisite vocals and a romantic-based narrative, the hit song "GOODBYE" is taking us for a ride all the way back to the early '00s.
In just a few months Aliyah has been able to grab everybody's attention with her very unique style. As a leader for all her fans, she made…
Inroducing 3Mix: Pop, RNB Band
A new band has arrived on the pop scene and it’s called 3Mix. Focusing in on a variety of music styles including RnB, pop and electro the band members consist of 3 vocalist; Myan Mirza, Karim Ismail and Usman Mirza.
By a chance meeting with Karim at a major London musical audition Myan spotted the potential in forming the group. The pair struck up a conversation and found that they…
