07-19-2011 08:30 AM CET - Industry, Real Estate & Construction

C.P.M. ContractPharma produces on Noack blister lines: Compatible lines offer several advantages

Press release from: Romaco Group
PR Agency: Ariadne MedienAgentur
Noack blister line in use at C.P.M./Temmler
Noack blister line in use at C.P.M./Temmler
Three Romaco Noack blister lines are currently in action at C.P.M ContractPharma. The compatibility of these three systems speeds up product changeovers and makes the lines more efficient. A Promatic cartoner, which switches from continuous to intermittent operation, has been integrated for the first time.

C.P.M. ContractPharma GmbH & Co. KG, a Bavarian contract packaging company belonging to the Temmler Group, trusts in Romaco Noack technology for the production of blister packaging. At its two facilities in Feldkirchen-Westerham and Bruckmühl, C.P.M/Temmler specializes in the manufacture and processing of solid, semi-solid and liquid pharmaceutical dosage forms. Three Noack N 921 blister lines are currently in action at the Bruckmühl site. Around 15 million blisters a year are produced on each of these lines, equivalent to between 40 and 50 different orders a month. In view of the fact that frequent product and batch changeovers are essential, C.P.M./Temmler has opted for a standardized line concept based on identical machines.

Seamless compatibility from one machine to the next has the advantage that the various formats and tools required can be flexibly integrated into each of the Noack lines. This gives the company extra latitude when it comes to planning and utilizing production capacities efficiently. Machine operators can work on all three Romaco lines without any additional training. The blister lines are optimally harmonized, both mechanically and from the software point of view. All process parameters are transferable, which also makes it easier to document the technical data.

This in-plant standardization enables processes to be set up and validated much faster than in the past. The short retooling times have resulted in a significant increase in general system availability and improved the efficiency of the line concept. “Our goal was to configure all three Romaco systems with the same format parameters”, says Hermann Brandstetter, responsible for project management tasks and technical coordination at C.P.M./Temmler. “The ergonomic machine design also supports quick and easy format changeovers.”

Cartoner switches from continuous to intermittent mode

For the first time, a Promatic PC 4200 horizontal motion cartoner, which can switch between continuous and intermittent operation, has been integrated in one of the Noack blister lines. This option was specifically designed by Romaco for use with the technology at C.P.M./Temmler. The ability to switch from continuous to intermittent mode is particularly recommended if blister stacks with ten or more strips need to be processed. Intermittent destacking entails placing the blisters in the cartoner's bucket chain in two steps. The stacks are therefore dropped from a lower height, which means the blisters are far easier to align and center. This alternation between two modes guarantees stable and efficient processes.

“The switchable cartoner mode is the outcome of our extremely constructive collaboration with Romaco”, Hermann Brandstetter reports. “Together we came up with a way of making our packaging processes more reliable.” C.P.M./Temmler switches between continuous and intermittent cartoning four or five times a week on average. Low stacks are packed in continuous mode, while intermittent operation is preferred for high stacks. A maximum output of 230 folding cartons per minute is achieved when the Romaco system is operated continuously or a maximum of 60 packs if it works intermittently.

Romaco Group

Romaco is a leading global supplier of processing and packaging equipment. Divided into two business areas for Processing and Packaging, the company develops system solutions for the pharmaceutical, cosmetics, food and chemical industries. The engineering specialist, headquartered in Karlsruhe (Germany), operates from four European locations with seven brands spanning multiple industries: the Bosspak, Noack and Siebler product lines are located in Karlsruhe, while the packaging brands Macofar, Promatic and Unipac are manufactured in Bologna (Italy). The Processing sector, represented by FrymaKoruma, resides at two sites in Neuenburg (Germany) and Rheinfelden (Switzerland). The product range of this single-source supplier includes primary and secondary packaging, sterile liquid and powder filling, process technology and wet grinding. More than 50,000 machines built by Romaco are currently in action in more than 180 countries around the globe. Some 450 staff support and supply to customers all over the world.

For more information about the Romaco Group, see www.romaco.com

Romaco contact

Bernd Webel
Sales Director
Romaco Group
Am Heegwald 11
76227 Karlsruhe
Tel. +49 (0) 721 4804 0
Fax +49 (0) 721 4804 225

Press contact

Susanne Silva
PR Consultant
Ariadne MedienAgentur
Daimlerstrasse 23
76185 Karlsruhe
Tel. +49 (0) 721 4647 29 1 00
Fax +49 (0) 721 4647 29 0 99

This release was published on openPR.
News-ID: 183895 • Views: 1823
More releases More releases
Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR.
openPR disclaims liability for any content contained in this release.

You can edit or delete your press release here: