openPR Logo
Press release

Non-Magnetic and Vacuum Compatible Motion Control Systems for SEM, Semiconductors, Medical, Aerospace

03-30-2011 01:16 PM CET | Science & Education

Press release from: PI (Physik Instrumente) L.P. Piezo Nano Positioning

Vacuum / Non-Magnetic Motion Control Brochure

Vacuum / Non-Magnetic Motion Control Brochure

Non-Magnetic and Vacuum Compatible Motion Control Systems for SEM, Semiconductors, Medical, Aerospace

PI (Physik Instrumente) L.P. – a leading manufacturer of precision motion-control and piezo nanopositioning products – has released a new brochure on non-magnetic and vacuum compatible precision positioning systems.

The publication presents a comprehensive overview of PI's precision motion control products for extreme operating conditions that are essential for many of today's leading edge applications in fields as diverse as: medical engineering, semiconductor test & manufacturing, high energy physics, scanning electron microscopy (SEM), astronomy and aerospace.

The brochure features a variety of high-end positioning systems from linear actuators, to piezoceramic translation stages and Hexapod-6 axis parallel positioners.

Different drive options such as classical motors (servo and steppers) and non-magnetic piezo-worm type motors and ultrasonic motors and positioners are available.

The vacuum / non-magnetic products brochure can be downloaded at: http://www.piezo.ws/pdf/Vacuum_Positioners_Piezo_Systems_Hexapods.pdf

About PI
PI is a leading manufacturer of piezo stages, piezo linear motors and precision motion-control equipment for microscopy, photonics, bio-nanotechnology & semiconductor applications. PI has been developing and manufacturing standard & custom precision products with piezoceramic and electromagnetic drives for 4 decades. The company has been ISO 9001 certified since 1994 and provides innovative, high-quality solutions for OEM and research. PI is present worldwide with eight subsidiaries and total staff of 500+

PI (Physik Instrumente) L.P.
16 Albert St.
Auburn, MA
USA

Contact:
USA / Canada: www.pi-usa.us
East: David Rego
Tel: (508) 832-3456
Fax: (508) 832-0506
Email: info@pi-usa.us
Midwest Joe McGonagle
(508) 832-3456
Email: info@pi-usa.us

West David Steinberg
Tel: (949) 679-9191
Fax: (949) 679-9292
Email: info@pi-usa.us

Europe: www.pi.ws
Germany: +49 (721) 4846-0
Italy: +39 (02) 665 011 01
France: +33 (1) 481 039 30
UK: +44 (1582) 764 334

Asia: www.pi-japan.jp
Japan: +81 (6) 6304 5605
China +86 (21) 687 900 08

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Non-Magnetic and Vacuum Compatible Motion Control Systems for SEM, Semiconductors, Medical, Aerospace here

News-ID: 168772 • Views: 2604

More Releases from PI (Physik Instrumente) L.P. Piezo Nano Positioning

Piezo Transducers for Medical Engineering & Life Sciences: New Brochure Availabl …
April 2012, Auburn, MA, – Piezo specialist PI (Physik Instrumente) has published a new brochure on medical applications of piezo ceramic actuators, transducers and motion components. The “Piezo Drive Solutions for Medical Engineering” entitled PDF document is available for download at: http://www.pi-medical.net/Piezo_Motion_for_Medical.htm Piezo Transducers Brochure for Medical Applications Piezo transducers and piezo motors can solve many problems encountered by traditional motors and motion components. They are more compact, provide
Nanopositioning Stages- Piezo Systems, Motors, Controllers: New Catalog
PI, a leading manufacturer of nanopositioning stages & precision motion-control equipment for bio-medical, semiconductor, imaging & nanotechnology applications, releases a new nanopositioning catalog. The 160-page catalog focuses on piezo flexure based nanopositioning systems capable of repeatedly moving distances as small as the diameter of an atom. It covers single axis stages, XY and XYZ stages as well as tip/tilt platforms for active optics, imaging and laser beam steering. Parallel
Fast Piezo Linear Actuator for Automation is Based on Ultrasonic Motor Technolog …
Auburn, MA -- piezo motor specialist PI introduces the new M-272 linear actuator for automation applications based on a maintenance-free PILine® ultrasonic ceramic motor. PILine® piezo ceramic ultrasonic drives offer an affordable alternative to electromagnetic linear motors and motor-leadscrew combinations when small dimensions and/or high speed are important. With velocities of up to 200 mm/s, these drives are fast, compact, and are readily integrated. In addition, PIline® motors are self-locking
Piezo Mechanisms Catalog Piezo Actuators, Piezo Motors, Piezo Stage Systems
PI (Physik Instrumente) L.P. -- a leading manufacturer of piezo ceramic actuators and precision motion-control equipment for semiconductor, bio-medical and nanotechnology applications -- has released a new catalog on Piezo Mechanisms. The 400-page catalog presents PI’s complete spectrum of piezomechanic components and motion systems, from simple direct actuators, to long-travel ceramic linear motors and complex multi-axis flexure guided nanopositioning stages and digital control electronics. The catalog can be downloaded

All 5 Releases


More Releases for Vacuum

Global Vacuum Pumps Market
Vacuum pump is a mechanical device which is used to create vacuum by removing gas molecules from a sealed volume. Growing adoption of vacuum pumps in power, oil & gas, chemical processing, and semiconductor industries is driving the demand for vacuum pumps. Moreover, rising investment in these industries is also expected to benefit the market of vacuum pumps globally. Sample of this report is available upon request @ http://www.persistencemarketresearch.com/samples/4376 On the basis
Metallurgical High Vacuum Announces High Vacuum Newsletter
Fennville, MI---Metallurgical High Vacuum has created a new “High Vacuum News” to provide heat treat industry professionals with tips and hints to keep their vacuum pumps running strong. As Geoff Humberstone, MHV President, comments: “This year marks 30 years for us as Metallurgical High Vacuum. Back in 1981, I saw the need for vacuum design and consulting and started the company. Within four years we added pump remanufacturing because we
Vacuum Pressure Transducers Accounced
New Transducers Direct TDH Series Feature Favorable Cost and Accuracy CINCINNATI – August 23, 2010 - Transducers Direct, LLC continues to expand its TDH pressure transducer line with the addition of two new vacuum transducers. With a list price starting at $89.00, the TDH31 and TDH41 are low cost vacuum and compound range transducers for use in any OEM or retrofitting application requiring an accurate and reliable unit. Both
Vacuum Controller VACVISION
With the new vacuum controller VACVISION and due to its large touch screen panel you have your complete vacuum process safely in mind and also in the forefront. The desired parameters can be set easily and monitored via a simple finger tip. The new compact VACVISION vacuum controller is equipped with a large TFT graphic display with touch panel. The VACVISION offers intuitive operation, a guided configuration menu (wizard), simple hardware
Metallurgical High Vacuum Ships Vacuum Chambers (Corrected)
Special Designs are Built to Customer Specifications Fennville, MI--- Metallurgical High Vacuum recently shipped two chambers for customer-specific applications. One vacuum chamber is over 72” high and will be used in P E. Chemical Vapor Deposition. The other chamber is a 12-inch square design that will be used to weld silicon sticks, complete with a two-stage booster vacuum pumping system. Both chambers are built of type 304 stainless steel for
Metallurgical High Vacuum Ships Vacuum Chambers
Special Designs are Built to Customer Specifications Fennville, MI--- Metallurgical High Vacuum recently shipped two chambers for customer-specific applications. One vacuum chamber is over 72” high and will be used in atomic layer deposition (ALD) to strengthen glass used in LCD's for phones. The other chamber is a 12-inch square design that will be used to weld silicon sticks, complete with a two-stage booster vacuum pumping system. Both chambers are