openPR Logo
Press release

3D Printing-Potential Game Changer for Global Power Market Analysis by IBM, DNV GL, Siemens AG, Materials Solutions Limited, GE, Arcam AB, ROSATOM, Westinghouse

03-29-2019 05:54 PM CET | Business, Economy, Finances, Banking & Insurance

Press release from: Orbis Research

3D Printing

3D Printing

3D printing or “additive manufacturing” is the process of joining materials to make objects from three-dimensional model data, usually layer upon layer. In 2017 the 3D printing industry was worth $7bn, up from $3bn in 2013 and by 2025 it is expected to account for over $20bn all over the world. In recent days, additive manufacturing (AM) has found its application in different sectors of the power industry, both in building prototypes and in main stream production leading to process simplification and operational efficiency.

Get Sample Copy of This Report at www.orbisresearch.com/contacts/request-sample/2956366

Top Leading Key Companies Mentioned:
IBM
DNV GL
Siemens AG
Materials Solutions Limited
GE
Arcam AB
ROSATOM
Westinghouse

With the power industry under pressure, manufacturers are turning towards AM for solutions with reduced costs and shorter timeframes. During the initial phase of making inroads in the power industry, 3D printing has achieved a fair level of success with the power industry and technological firms creating an ally for the benefit of each other. Further in this report we will try to learn how 3D printing is penetrating and adjusting to the varied needs of the power industry.

Scope

– The report discusses in detail the present state of the 3D printing technology market and how it is increasingly finding new applications in both conventional and renewable energy industry.
– The report also reflects on the future prospects and challenges of this new technology in global power market.

Else place an Inquire before Purchase@ www.orbisresearch.com/contacts/enquiry-before-buying/2956366

Reasons to buy

– To gain an insight on how 3D printing is gradually penetrating both conventional and renewable power sector resulting in process simplification, operational efficiency and reduced costs.

Major Points from Table of Content:

1 Table of Contents
2 3D Printing – Potential Game Changer for Global Power Market
2.1 Introduction
2.2 3D Printing in Renewable
2.2.1 3D Printing in Solar
2.2.2 3D Printing in Wind Energy
2.2.3 3D Printed Batteries
2.2.4 3D Printing in Conventional Power
2.3 Conclusion
2.4 Contact Us
2.5 Disclaimer

Browse Full Report with TOC: www.orbisresearch.com/reports/index/3d-printing-potential...

About Us:

Orbis Research (orbisresearch.com) is a single point aid for all your market research requirements. We have vast database of reports from the leading publishers and authors across the globe. We specialize in delivering customized reports as per the requirements of our clients. We have complete information about our publishers and hence are sure about the accuracy of the industries and verticals of their specialization. This helps our clients to map their needs and we produce the perfect required market research study for our clients.

Contact Information:

Hector Costello
Senior Manager – Client Engagements
4144N Central Expressway,
Suite 600, Dallas,
Texas – 75204, U.S.A.
Phone No.: +1 (214) 884-6817; +9164101019
Email: sales@orbisresearch.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release 3D Printing-Potential Game Changer for Global Power Market Analysis by IBM, DNV GL, Siemens AG, Materials Solutions Limited, GE, Arcam AB, ROSATOM, Westinghouse here

News-ID: 1679858 • Views: 465

More Releases from Orbis Research

Global IT Asset Management (ITAM) Software Market 2019 Top Players Like IBM, HP, …
IT Asset Management (ITAM) Software is the software to implement the IT asset management activities. IT asset management (ITAM) is the set of business practices that join financial, contractual and inventory functions to support life cycle management and strategic decision making for the IT environment. The global IT Asset Management (ITAM) Software market will reach xxx Million USD in 2019 with CAGR xx% 2019-2025. The main contents of the report including: Global
Global Campaign Management Software Market 2019 Is Growing Dynamically with Camp …
Campaign Management Software manages engaging holistic campaigns across all marketing channels. Track results and find out which messages are working best with which people, in which context and in which media. Fine-tune your campaigns and maximize your ROI. The global Campaign Management Software market will reach xxx Million USD in 2019 with CAGR xx% 2019-2025. The main contents of the report including: Global market size and forecast Regional market size, production data and
Global Clientless Remote Support Software Market 2019 by Bomgar, Cisco WebEx, Lo …
The global Clientless Remote Support Software market will reach xxx Million USD in 2019 with CAGR xx% 2019-2025. The main contents of the report including: Global market size and forecast Regional market size, production data and export & import Key manufacturers profile, products & services, sales data of business Global market size by Major Application Global market size by Major Type Sample of this report@ https://www.orbisresearch.com/contacts/request-sample/2982975?utm_source=Mohit Key manufacturers are included based on company profile, sales
Global Policy Management Software Market 2019 NETconsent, MetaCompliance, Compli …
The global Policy Management Software market will reach xxx Million USD in 2019 with CAGR xx% 2019-2025. The main contents of the report including: Global market size and forecast Regional market size, production data and export & import Key manufacturers profile, products & services, sales data of business Global market size by Major Application Global market size by Major Type Sample of this report@ https://www.orbisresearch.com/contacts/request-sample/3098406?utm_source=MOhit Key manufacturers are included based on company profile, sales data

All 5 Releases


More Releases for Printing

Japan Packaging Printing In Global Market By Printing Technology: Flexography Pr …
Researchmoz added Most up-to-date research on "Japan Packaging Printing In Global Market By Printing Technology: Flexography Printing, Rotogravure Printing, Offset Printing And Digital Printing" to its huge collection of research reports. The global Packaging Printing market is valued at XX million USD in 2016 and is expected to reach XX million USD by the end of 2017, growing at a CAGR of XX% between 2016 and 2022. Japan plays an important role
Printing Toners
Transparency Market Research has published a new market report titled “Printing Toners Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2014 - 2020.” According to the report, the printing toners market was valued at USD 2.91 billion in 2013 and is likely to reach USD 4.33 billion by 2020, expanding at a CAGR of 5.8% during the forecast period from 2014 to 2020. In terms of volume,
3D Printing Medical Devices
According to Stratistics MRC, the Global 3D Printing Medical Devices market is expected to grow from $0.77 billion in 2015 to reach $3.19 billion by 2022 with a CAGR of 22.6%. Huge investments in R&D and continuous technological advancements in 3D printing are the major factors driving the market. Furthermore, booming market for organ transplantation, increasing acceptance of 3D-printed implants and organs are some of the key factors fueling the
Kansas City Printing
Lenexa, KS – Colorstar Printing, a Kansas City printing & direct mail marketing company, today announced the launched of a newly re-developed website. Colorstar Printing has been a leading provider of commercial printing and direct mail marketing services in Kansas City since 1998. Small, medium and even Fortune 500 companies have selected Colorstar as a cost effective solution to outsource their printing needs. The company provides business
Color Printing Services
Agoura Hills, California – October 15, 2010 - Color Printing Pros has expanded its business card line with three new "wow factor" products. Color Printing Pros now offers its customers twenty point white and frosted plastic business cards with round corners, sixteen point silk laminated business cards, and ten point EndurACE waterproofs business cards. The three new offerings join the extensive existing line of business cards offered
Transparent Printing
The Onlineprinters GmbH expanded their Trusted Shops seal of excellence with a new evaluation portal – customer satisfaction is reflected in the website’s public evaluation system. Neustadt an der Aisch - With immediate effect the customers can publicly evaluate the online printers in their online shop and submit feedback on customer satisfaction. This is made possible by the customer evaluation portal of Trusted Shops, the leading European certifier of online shops