Aircraft Auxiliary Power Unit Market – Analysis on Industry Trend Factors, Size, Share and Competitors Major Changes in Next 5 years by Safran, NEC Corporation, Fujitsu, Aware, 3M Cogent, Bio-Key International, Precise Biometrics AB
An auxiliary power unit (APU) is a device on an aircraft that supplies energy for various purposes other than thrust force for engine. The primary function of an aircraft APU is to provide power to start the main engines of an aircraft. Turbine engines in aircraft must be propelled to a high rotational speed to provide necessary air compression to maintain a desired efficiency of the engine. Smaller jet engines are generally given initial propulsion by an electric motor, while larger engines are generally propelled by an air turbine motor. Before the start of engines, the APU is triggered, generally by a battery. As soon as the APU starts running, it supplies power to start the airplane’s main engines.
The APU can also act as a back-up power generator, in exceptionally rare circumstances when both engines fail. Aircraft APUs generally produce 115 V alternating current (AC) at 400 Hz, used to power the electrical systems of the aircraft. APUs can deliver power through a single-phase or a three-phase system.
On the basis of Aircraft type, the market can be segmented into fixed wing aircraft segment, and wide body aircraft segment. Airbus has thoughtfully moved towards “more-electric” aircraft systems, and accordingly it replaced one of the three hydraulic systems in A380 with two electric systems. This “two-plus-two” systems architecture was then recurrent on the A350. This shift from hydraulic systems to electric systems by various aircraft companies will tend to increase the aircraft auxiliary power unit market in upcoming years.
Get Free Sample Report @ www.marketresearchfuture.com/sample_request/6002
On the basis of platforms, the two segments are military and commercial. Within the military aircraft segment, fighter jets are usually considered to have an average life span between 40 to 50 years, while the average life span for an APU is between five to seven years; this means that an aircraft will have more than six retro fitments of APU on average, during its serviceable life. The integration of newer onboard weapon systems and avionics systems have also augmented the demand for retro-fitment of newer and powerful APU.
Moreover, cost of a military aircraft ranges in hundreds of millions, which makes it difficult for budget conscious defense ministries to acquire newer aircraft on a regular basis and increases their dependency on retrofitting of aircrafts.
The emergence of 3D printing technologies will be one of the key trends that will contribute to the growth of the aircraft APU market during the forecast period. 3D printing or additive manufacturing is increasingly implemented by aircraft part manufacturers to develop cabin interiors and complex engine parts for their commercial aircrafts. The application of 3D printing reduces warehouse management, ensures less wastage of materials, and decreases production costs. Moreover, the implementation of 3D printing in aerospace manufacturing will also offer long-term sustainability and ensure better performance of the aircraft APU.
The usage of APU to crank up the aircraft engines has been extremely helpful, but the noise and vibration produced causes uneasiness to both the cabin as well as the cockpit members. To overcome this challenge, APU Original Equipment Manufacturers, in cooperation with aircraft manufacturers, have been carrying out significant research; this has led to the introduction of APU arrangement support systems on an aircraft. However, technological advancement is also a threat to this market, as the move towards electric-powered flight may make switching the APU with high-power battery systems possible within the next two decades. Airbus and Boeing have already started using batteries to start the APU, and the next step may very well be replacing the APU itself.
Aircraft Auxiliary Power Unit Market is estimated to witness a CAGR of more than 4% during the forecast period 2018 to 2023.
North America is projected to lead the aircraft auxiliary power unit market due to presence of key manufacturers in the region. European market, led by Germany, France, U.K and Russia, is also projected to observe substantial growth in aircraft auxiliary power unit market during the forecast period. Increasing number of noise control mandates at the airports by the government authorities is a key driving factor for aircraft auxiliary power unit global market.
Asia Pacific aircraft auxiliary power unit market will witness strong growth due to increasing demand from commercial and military aircrafts. Growing population, along with high productivity attained in aviation industry, are the key factors for industry growth. Moreover, favorable government policies encouraging investment in military and civil aviation sector will further benefit the aircraft auxiliary power unit market in the coming years.
Latin American market, headed by Mexico, Brazil and Argentina, is likely to witness significant growth during the forecast period. Growing investments in the region and favorable trade policies will fuel the business growth in the region.
The key players in aircraft auxiliary power unit market are AEGIS Power Systems, Inc. (U.S.), AEROSILA (Russia), Honeywell International Inc (U.S.), Hamilton Sundstrand Corp (U.S.), Kinetics Ltd. (Israel), Technodinamika (Russia), Safran Power Units (France), Rolls-Royce plc. (England), UNITED TECHNOLOGIES (U.S.), and United Technologies Corporation—Pratt & Whitney Division (U.S.).
The report for Global Aircraft Auxiliary Power Unit Market of Market Research Future comprises extensive primary research, along with the detailed analysis of qualitative as well as quantitative aspects by various industry experts and key opinion leaders; it helps the reader gain a deeper insight into the market and industry performance. The report gives a clear picture of current market scenario, including historical and projected market size in terms of value and volume, technological advancement, macro economical and governing factors in the market. The report provides detailed information and strategies of the top key players in the industry. The report also contains a broad study of the different market segments and regions.
LIST OF TABLES:
Table 1 Global Aircraft Auxiliary Power Unit Market: By Region, 2018-2024
Table 2 North America Aircraft Auxiliary Power Unit Market: By Country, 2018-2024
Table 3 Europe Aircraft Auxiliary Power Unit Market: By Country, 2018-2024
Table 4 Asia Pacific Aircraft Auxiliary Power Unit Market: By Country, 2018-2024
Table 5 Middle East & Africa Aircraft Auxiliary Power Unit Market: By Country, 2018-2024
Table 6 South America Aircraft Auxiliary Power Unit Market: By Country, 2018-2024
Table 7 Global Aircraft Auxiliary Power Unit Market, By Aircraft Type, By Regions, 2018-2024
Table 8 North America Aircraft Auxiliary Power Unit Market, By Aircraft Type, By Country, 2018-2024
Table 9 Europe Aircraft Auxiliary Power Unit Market, By Aircraft Type, By Country, 2018-2024
Browse Full Reprot @ www.marketresearchfuture.com/reports/aircraft-auxiliary-p...
About Market Research Future:
At Market Research Future (MRFR) we enable our customers to unravel the complexity of various industries through our Cooked Research Reports (CRR), Half-Cooked Research Reports (HCRR), Raw Research Reports (3R), Continuous-Feed Research (CFR), and Market Research & Consulting Services.
Market Research Future
+1 646 845 9312
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Aircraft Auxiliary Power Unit Market – Analysis on Industry Trend Factors, Size, Share and Competitors Major Changes in Next 5 years by Safran, NEC Corporation, Fujitsu, Aware, 3M Cogent, Bio-Key International, Precise Biometrics AB here
News-ID: 1613633 • Views: 174
More Releases from Market Research Future
Application Performance Management (APM) Market 2019 Top Key Players: IBM Corpor …
Application Performance Management Market Highlights: Tools and processes responsible for monitoring and managing the performance and availability of software applications. Application performance management (APM) tools alert IT staff to disruptions in availability and/or quality to end users when accessing mission-critical applications. Applications monitored by APM tools can include traditional non-connected applications, Web-enabled applications, streaming apps, and cloud applications. An application-centric manner is the ability to identify, diagnose and repair problems quickly, which
Plastic Container Market 2019 Global Industry Analysis By Share, Key Company, Tr …
Market Synopsis of Plastic Container Market. Plastic containers are one of the most used and preferred packaging material all over the world and can readily be molded into a variety of products that can be used in a wide range of applications. Plastic packaging refers to numerous products such as plastic bottles & food containers, pouches among others. They are generally made up of plastic resins such as PET, PP, and
Metal Cans Market 2019 Global Analysis, Industry Size, Share Leaders, Current St …
Global Metal Cans Market Information by Material (Aluminum, Steel, Tin), by Type (2-piece, 3 piece), by Application (Food, Beverage and Others) and Region - Forecast to 2022 Market Scenario The key drivers for the growth of the metal cans market are increasing demand for aerated and non-aerated beverages, increasing consumer demand for light weight packaging and increasing health awareness regarding use of non-carcinogenic packaging materials. Metal cans are widely used in food
Thermal Paper Market 2019 Global Industry Analysis By Key Players, Share, Size, …
Global Thermal Paper Market Information Report, By Technology (Direct Thermal, Thermal Transfer, and Others), By Application (POS, Lottery & Gaming, Labels & Tags, and Others) and By Region - Global Forecast To 2023 The key players of global thermal paper market are Appvion, Inc. (U.S.), Oji Paper (Thailand) Ltd. (Thailand), Koehler Paper Group (Germany), Ricoh Company Ltd (Japan), Jujo Thermal Ltd. (Finland), Mitsubishi Paper Mills Ltd. (Japan), Hansol Paper Co., Ltd
More Releases for Aircraft
Light Aircraft Market Is Booming| Diamond Aircraft, Piper Aircraft, TECNAM
A latest survey on Global Light Aircraft Market is conducted covering various organizations of the industry from different geographies to come up with 100+ page report. The study is a perfect mix of qualitative and quantitative information highlighting key market developments, challenges that industry and competition is facing along with gap analysis and new opportunity available and may trend in Light Aircraft market. The report bridges the historical data from
Global Aircraft Battery Market
Global Aircraft Battery Market – Industry Analysis and Forecast (2018-2026) – by Type, Application, Aircraft Type, and Region. Global Aircraft Battery Market was valued at US$ 478.21Mn in 2017 and is expected to reach US$ 900.32Mn by 2026, at a CAGR of 8.23% during a forecast period. A battery is a device containing one or more cells that convert chemical energy directly into electrical energy. Major driving factors of the Aircraft Battery
Aircraft Tyres Market key players Bridgestone Corporation, Dunlop Aircraft Tyres
Aircraft tyres are one of the most highly engineered products having significant complexity which require large number of raw materials pertaining to steel, cord fabric, artificial and natural rubber and other chemicals. Aircraft tyres have cords which serve as the reinforcing materials in the tyre that provide dimensional stability, supporting the aircraft weight, as well as keeping the tyres in shape different road conditions. Aircraft tyres play a vital role
Global Light Aircraft Market 2017 - Cirrus Aircraft, E-Go Aeroplanes, ICON Aircr …
A light aircraft is an aircraft that has a maximum gross takeoff weight of 12,500 lb (5,670 kg) or less. The many uses of light aircraft include aerial surveying, such as monitoring pipelines. They are also used for light cargo operations, such as "feeding" cargo hubs, as well as some passenger operations. Light aircraft are also used for marketing purposes, such as banner towing and skywriting. Primary flight instruction is
Commercial Aircraft Landing Gear Market By Aircraft Type (Narrow-body aircraft, …
An undercarriage of the aircraft, spacecraft that is entitled to sustain the entire weight associated with the aircraft during takeoff and landing, is known as landing gear. To maintain the optimum desired ratio between payload associated with the entire aircraft and flight range of the aircraft, weight reduction is a prominent factor that has enabled the need for technologically advanced landing gears to achieve fuel efficiency. Technological advancements and R&D
Global Aircraft Seat Market - RECARO, AVIC, Geven, Acro Aircraft Seating
The report that is written on the title Aircraft Seat Market 2016 covers all the aspects of the global market study. This report has an estimation about the Aircraft Seat Market size in terms of value (US$). The report contains the broad segmentation of the market. The report provides the information about the Aircraft Seat Market and also forecasts its position in the coming years. An airline seat is a