openPR Logo
Press release

Integrated Stepper Controller/Drive with Ethernet Interface

02-25-2019 11:28 AM CET | Industry, Real Estate & Construction

Press release from: AMCI

AMCI's SD4840E2 Integrated Stepper Controller/Drive with Ethernet Interface

AMCI's SD4840E2 Integrated Stepper Controller/Drive with Ethernet Interface

Terryville, CT – Advanced Micro Controls Inc. (AMCI), releases their new DC-powered integrated stepper controller/drive package with multi-protocol Ethernet communication. AMCI’s new SD4840E2 combines drive and motion control technology into a single product to reduce stepper control system costs and simplify installation. The SD4840E2 integrated controller + drive communicates with the host PLC over the EtherNet/IP, Modbus-TCP, or Profinet network, and move commands are easily programmed through the host PLC’s software. AMCI’s SD4840E2’s money saving design and standard DIN rail mounting makes it a perfect solution for new installations or controls upgrades.

Stepper Controller/Drive Features:
· Stepper Controller + Drive in single package
· E2 Ethernet Technology
· 0.1 – 4.0Arms output current
· Full complement of motion profiles including homing and electronic gearing
· Works with most 2-phase stepper motors
· Easy programming without additional software
· DIN rail mounting

The SD4840E2 features AMCI’s new E2 Technology which is an innovative multi-protocol approach to Ethernet distributed I/O that makes moving from one industrial Ethernet protocol to another simple. Supported protocols include EtherNet/IP™, Modbus-TCP, and PROFINET. An advanced web server integrated within the SD4840E2 facilitates network configuration via web-browser. The SD4840E2 has a built-in Ethernet switch and dual network ports, offering fault-tolerant networking; DLR for EtherNet/IP & MRP for Profinet, which can detect a break in the network and redirect the network traffic maintaining communication and system up-time. The embedded switch also provides a network connection for additional devices without increasing the nodes on your existing ethernet switch.

Besides connectivity with Ethernet/IP, Modbus-TCP, and Profinet, AMCI's SD4840E2 Networked Series boasts several features over conventional stepper drivers. AMCI’s vari-step velocity control provides unsurpassed smoothness and performance independent of the user’s configured resolution, and short circuit protection and overtemperature circuitry ensure the product’s safety & reliability. The SD4840E2 mounts on a standard EN 05 022 – 35 X 7.5 DIN rail to simplify installation and lower costs.

For more information, please visit:!/244

About Advanced Micro Controls Inc.
Founded in 1985, Advanced Micro Controls, Inc. (AMCI) is a leading U.S. based manufacturer with a global presence. AMCI industrial control products improve PLC-based automation systems with specialized position sensing and motion control technology that simplifies automation and adds reliability to manufacturing processes. AMCI designs and manufactures all of their products, enabling superior quality and innovation. The company provides 24/7 technical support staff, ready to answer questions about installation, configuration and operation of all AMCI products.

Media Contact: Rachael Novak
Telephone: (860) 585-1254 ext.132

Advanced Micro Controls Inc.
20 Gear Drive
Plymouth Industrial Park
Terryville , CT 06786 USA
Telephone: (860)-585-1254
Facsimile: (860) 584-1973

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Integrated Stepper Controller/Drive with Ethernet Interface here

News-ID: 1611196 • Views: 154

More Releases from AMCI

AMCI Receives 2019 Control Design Readers’ Choice Award
Terryville, CT – Advanced Micro Controls Inc. (AMCI) has been recognized in the Control Design 2019 Readers’ Choice Awards. Industry trends and innovations have crept into the rankings, and AMCI’s integrated stepper motors have been ranked among the best of the best thanks to the readers of Control Design who have chosen AMCI as a preferred Stepper Motor supplier in the Motion category. AMCI’s SMD Series integrated motors combine a high
Compact, Absolute Multi-Turn Analog Rotary Shaft Encoder
Terryville, CT – Advanced Micro Controls Inc. (AMCI), releases their new DC60 absolute multi-turn analog rotary shaft encoder in a compact and cost effective 60mm package. These encoders offer analog current or analog voltage output and can be ordered with a full scale output over any number of turns between 1 and 1,024. The analog output has 16 bit resolution regardless of the number of turns encoded.
Cost Effective Motion Control for CompactLogix® 5380
Terryville, CT – Advanced Micro Controls Inc. (AMCI) announces their ANG1(E) integrated stepper controller/drive that connects directly to Rockwell Automation’s new CompactLogix® 5380, providing a low cost, sophisticated motion control solution. The ANG1(E) “2-in-1” product design integrates a stepper controller and drive into a single package, significantly reducing cabling with the ability to expand up to 6 axes of motion over a single EtherNet/IP connection. Move commands are easily programmed
Integrated Stepper Motion Control Packages Now Smaller
Terryville, CT - Advanced Micro Controls Inc. (AMCI), has added a smaller, size 17 option to their lineup of PLC-based SMD Series “all-in-one” stepper motor + drive + controllers to satisfy a wide variety of applications with varying torque requirements. The SMD Series offers many sophisticated features at a budget friendly price point, and integration eliminates the need to purchase multiple components. AMCI’s SMD Series integrated solutions are ideal for

All 5 Releases