API Capacitors' Guide to Obsolete Cpacitors by GD Rectifiers

Over the past decade or two the capacitor industry has seen some of the major OEM's either ceasing manufacture completely or discontinuing product lines, effectively making the capacitors within them obsolete.

This can leave buyers and engineers trying to replace a part from a discontinued line of capacitors in a difficult situation. API Capacitors have designed this sourcing guide for those purchasers and engineers that have found themselves in the same position and are concerned about the availability of an older part.

Why would someone want to find obsolete, retrofit, discontinued, spare or replacement parts?

Often engineers are tasked with refurbishing or maintaining the life of older equipment or machinery. The problem engineers face is that the designs for equipment originally manufactured 10, 20 or 50 years ago will typically include components which have since been discontinued. This leads to a difficultly finding replacement parts for products which are worn but essential to prolonging the life of the product the equipment is a part of.

Similarly, a part in a piece of equipment may have reached the end of its life or experienced a failure. In situations like this, end users may seek to buy a one-off part rather than placing a batch order, which would typically be the only type of order an original manufacturer will deal with.

Where can I find electrical components that have been discontinued or spares?

If you are in doubt about the availability of an item, call the original manufacturer or a trusted distributor.

When contacting the original manufacturer, bear in mind that they may not be too helpful when it comes to an obsolete part. An OEM will always try to upsell the inclusion of one of their new parts rather than help you to keep an obsolete part in your equipment design.

You may have to trawl through their archive of old specifications and provide this to an alternative source manufacturer.

There are many alternative sources for purchasing older parts than through the OEM, more often than not an alternative manufacturer will be able to match the design and manufacture an interchangeable part to fit the equipment which needs servicing if the OEM part is no longer available.

In some instances, it may be possible to source obsolete components from a distributor, capacitors should be stored correctly to the manufacturer's instructions which will result in most types not aging. However, if you are considering sourcing electrolytic capacitors from a distributor with an inventory of old stock, be aware there is a product shelf life on this type of capacitor.

Where can I find discontinued capacitors?

There are independent capacitor manufacturers who are able to manufacture interchangeable parts to replace discontinued OEM capacitors.

Typically, capacitors can be manufactured and designed to order as per application requirements, which means a solution can be provided for almost any spare or replacement capacitor request.

What do I need to use an alternative source?

With the design or specification for the original part, your alternative source will be able to manufacture the part to your requirement and application with no issues.

If the original design or full specification of the capacitor is not available, your alternative manufacturer will be able to design an equivalent part, as long as you provide them with the following information:

– Product and capacitor application

– Required capitance tolerance

– Any temperature or humidity requirements

– Whether the capacitor will be subject to any high current discharge

– The physical part measurements or size

– The rated voltage

– The actual working voltage which will be applied to the part

Whilst some buyers may not have these technical details to hand, the engineering department will certainly know the requirements and conditions the part will need in order to perform.

Replacing old or discontinued Parts

Whilst you may be safe if the required item is a legacy part, certain parts, for example diodes or fuses, are much easier to replace than an item such as a high voltage capacitor. Trying to find an exact replacement part can lead to obstacles including strict minimum order quantities and unknown specifications for discontinued items.

API Capacitors is a UK based manufacturer who are able to reverse engineer parts and redesign them to specifications which match the original. Equivalent designs for new and old OEM capacitors including (but not limited to) VISHAY, EPCOS, TDK, NWL and Electronicon can be produced. Our specialist skills make replacing a high voltage capacitor as easy as replacing nuts and bolts.

API Capacitors produce interchangeable parts equivalent to those made by the original source offering an alternate source. This can be extremely useful for buyers needing to source a part which has become obsolete or require a quantity below the original manufacturers minimum order quantity.

The manufacturers specialities reside in producing equivalent parts to serve automotive, commercial, military, aerospace, power generation, marine and rail organisations that still require them.

GD Rectifiers has been an official distributor for API Capacitors for over twenty years, they pride themselves on working alongside its customers and API, tailoring the product correctly to its specific application so it performs exactly as required with total reliability.

For further information on API Capacitors, please call GD Rectifiers on: 01444 243 452 or email: gdrectifiers@gdrectifiers.co.uk.

GD Rectifiers is a Global Manufacturer and Distributor of products, services and solutions to commercial and industrial users of power electronic components.

Established in 1964, GD Rectifiers has over 50 years of extensive experience across a large range of markets, specialising in new and current technologies for industrial power control applications. An extensive product offering has built GD Rectifiers exceptional reputation as the go-to power specialist with innovative experience across: Aviation, Automotive, Rail, Medical, Industrial and Electronics markets.

GD Rectifiers have extensive experience in the rail industry and are RISQS Qualified.

GD Rectifiers is a ISO 9001:2015 registered company that design and develop bespoke power semiconductor assemblies to control voltage, current and frequency for international industrial markets.

GD Rectifiers
Bentley House
2 William Way
Burgess Hill
West Sussex
RH15 9AG

This release was published on openPR.