Press release
UV Lamps generate ozone and remove greases and smells from exhaust air
UV lamps break down greases in kitchen hoods• By reducing the danger of fire, there are cost savings in the fire prevention measures which need to be taken
• Measurement of the ozone-generating UV radiation in Heraeus Noblelight’s accredited measurement laboratory
Heraeus Noblelight is showing solutions with ultraviolet light for air treatment at the ISH/Aircontec exhibition, which takes place in Frankfurt from the 6th to 10th March. A particularly interesting application is the use of ozone-generating UV-lamps in kitchen exhaust hoods. Here the UV radiation prevents grease deposits, prevents fires and saves cleaning costs. UV radiation is an environmentally friendly and economical alternative to chemical techniques. The ozone-generating UV radiation of the UV lamps can be measured in Heraeus Nobelight’s accredited measurement laboratory.
Treatment of Aerosols
The use of greases and oils in the kitchen leads to deposits in the kitchen exhaust hoods and the flues, so that there is both an increased danger of fire and the creation of a source smells. The physical method of UV radiation is an economical and environmentally friendly alternative to cost-intensive manual cleaning of the flues and frequent filter replacement.
By using special Heraeus UV lamps, ozone is generated inside the kitchen hood from the oxygen within the environmental air. The emitted radiation at a wavelength of 185nm is used to do this. The radiation at the longer wavelength of 254nm photolyses the ozone into excited oxygen, which oxidises the long chain molecules. Organic materials such as grease and aromatics are continuously “cold combusted” and broken down. The exhaust ducting and the exhaust hood remain grease-free, danger of fire is significantly reduced and cooking smells in the exhaust air are completely eliminated. Even at the high exhaust temperatures of up to 90ºC above a grill, the ozone-generating UV lamps from Heraeus Noblelight are extremely powerful. They are particularly suitable for situations where a lot of grease is used to bake or fry, such as in fast food restaurants, large kitchens and in the industrial production of fish and meat meals.
Unique internal coating ensures long operating life.
The unique Heraeus Longlife coating of the lamp tube is responsible for the long life of their UV lamps. Moreover, the Heraeus Longlife coating is transparent to the very short ozone-generating UV radiation at a wavelength of 185nm. The operating life of the lamps is also significantly extended in this wavelength range compared with conventional techniques.
Measurement of the ozone-generating radiation in the Heraeus laboratory
UV radiation at a wavelength of 185nm is completely absorbed by the surrounding air at a distance of only 30cm from the lamp. Precise measurements should be carried out only under vacuum conditions. The Heraeus Measurement Laboratory has a vacuum chamber at its disposal and this is used for the complete and trouble-free detection of the 185nm radiation, which strongly absorbs oxygen. The design of the UV lamps can be optimally matched to customer requirements: the output-dependent efficiency is evaluated, the best mode of operation is defined and the output is optimised. By means of investigations in the wind tunnel at the Heraeus laboratory, the thermal parameters of the lamp can be observed so that the lamp can be optimised with the operating temperature. Ozone measuring equipment is used to check the generated ozone concentration. The lamps are precisely matched to the equipment and the application.
Heraeus Noblelight is a manufacturer of special light sources. At the ISH/Aircontec exhibition in Frankfurt/Main from the 6th to 10th March, Heraeus will be showing a wide range of ultraviolet lamps for air oxidation and air disinfection.
See us at Aircontec on Stand C 09, Hall 5.1.
Since the development of UV lamp technology by Richard Kuech in 1904, Heraeus Noblelight can look back to more than 100 years of experience in the development, production and application of UV emitters. Through innovations such as Longlife technology, Heraeus continues to set milestones in the field of UV lamp technology to increase the productivity of industrial processes. Heraeus Noblelight is an original equipment supplier and a partner of choice for many systems’ builders involved in the disinfection of water, air and surfaces, as well as for manufacturers of systems for photo-chemistry and photo-oxidisation.
Heraeus, the precious metals and technology group headquartered in Hanau, Germany, is a global, private company in the business segments of precious metals, dental health, sensors, quartz glass and specialty lighting sources. With revenues of more than EUR 9 billion and more than 10,600 employees in over 100 companies, Heraeus has stood out for more than 150 years as one of the world’s leading companies involved in precious metals and materials technology
Heraeus Noblelight GmbH with its headquarters in Hanau and with subsidiaries in the USA, Great Britain and China, is one of the technology- and market-leaders in the production of specialist light sources. In 2005, Heraeus Noblelight had an annual turnover of 79 Million € and employed 644 people worldwide. The organisation develops, manufactures and markets infrared and ultraviolet emitters for applications in industrial manufacture, environmental protection, medicine and cosmetics, research, development and analytical laboratories.
Reader enquiries:
Heraeus Noblelight GmbH
Heraeusstraße 12-14
D-63450 Hanau
Contact: Karl Brieden
Tel +49 6181/35-9966, Fax +49 6181/35-16 9926
E-Mail hng-disinfection@heraeus.com
Press enquiries:
Daniela Hornung
Heraeus Noblelight GmbH, Marketing
Tel +49 6181/35-8539, Fax +49 6181/35-16 8539
E-Mail daniela.hornung@heraeus.com
www.heraeus-noblelight.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release UV Lamps generate ozone and remove greases and smells from exhaust air here
News-ID: 15527 • Views: …
More Releases from Heraeus Noblelight

Infrared Heating helps to ensure quality in the manufacture of composite structu …
An infrared heating system from Heraeus Noblelight is helping to ensure the high quality of composite aerospace structures manufactured at the new GKN Aerospace facility at Western Approach, near Bristol. The system, which is used to provide interim processing of the laid-up composite rear spar assembly of the Airbus 350 XWB to prevent subsequent wrinkling, was custom-designed and developed in close co-operation with GKN Aerospace engineers following initial tests at…

Seven Good Reasons for the D2plus Light module
Heraeus Noblelight, one of the technology and market leaders in the field of specialty light sources will again exhibit at ANALYTICA, to be held in Munich, Germany in April 2012. Heraeus will introduce its “Seven Good Reasons for D2plus Light modules” at the show, making the life of instrument developers easier.
Developing new analytical instruments places ever-increasing demands on engineers, to design-in the best available light-source and avoid future operational problems.…

Specialty Light Sources for the Printing Industry
Hanau, February 2012
The Competence in Specialty Light Sources for printing systems
Special and personalized printing processes need special treatment. The ink of ink jet or laser printers need to be completely dried or cured before the printed sheets are passed on for subsequent operations such as stacking, cutting, folding or gluing. Infrared or UV technology is used for drying and curing, depending on the type of ink. Heraeus Noblelight presents its…

Infrared Emitters Improve Lacquered Surfaces
Many screens, internal claddings in cars and high value cosmetic packages are manufactured from plastics and contain a protective lacquer or finishing. The drying of the coating on the plastic components is not a trivial matter, for the surfaces need to be perfectly cured without applying to much heat to the plastic. Infrared heaters transfer energy in a contact-free manner and are easy to control. Consequently, the heat is precisely…
More Releases for Destruction
What's Driving the Data Destruction Services Market 2025-2034: Growing Data Secu …
What Are the Projections for the Size and Growth Rate of the Data Destruction Services Market?
Rapid expansion has been seen in the market size of data destruction services over the past few years. The market, which was valued at $10.18 billion in 2024, is predicted to rise to $12 billion in 2025 with a compound annual growth rate (CAGR) of 17.8%. Factors contributing to growth during the historic period include…
Needle Destruction Devices Market - Efficiency and Reliability: Needle Destructi …
Newark, New Castle, USA: The "Needle Destruction Devices Market" provides a value chain analysis of revenue for the anticipated period from 2023 to 2031. The report will include a full and comprehensive analysis of the business operations of all market leaders in this industry, as well as their in-depth market research, historical market development, and information about their market competitors.
Needle Destruction Devices Market: https://www.growthplusreports.com/report/needle-destruction-devices-market/8442
This latest report researches the industry structure,…
NitroShred – Data Destruction On-Demand
Teltow, July 8, 2020
Nitrokey GmbH, based in Teltow near Berlin and specializing in security hardware Made in Germany, now offers data destruction as an on-demand service. The special: Data carriers are sent in and then securely destroyed; no subscription required. Since classic data destruction is unsuitable and too expensive for one or a few data media, on-demand data destruction is the first suitable solution for self-employed persons, startups, small businesses…
Global Data Destruction Service Market 2018 Top Players are: Simsre Cycling, Gua …
The report on the global Data Destruction Service market offers complete data on the Data Destruction Service market. Components, for example, main players, analysis, size, situation of the business, SWOT analysis, and best patterns in the market are included in the report. In addition to this, the report sports numbers, tables, and charts that offer a clear viewpoint of the Data Destruction Service market. The top contenders Simsre Cycling, Guardian…
Data Destruction Service Market Is Thriving Worldwide | Leading Key players Sims …
HTF MI recently launched the Global Data Destruction Service study with 100+ market data Tables, Pie Chat, Graphs & Figures spread through Pages and easy to understand detailed analysis. At present, the market is developing its presence. The Research report presents a complete assessment of the Market and contains a future trend, current growth factors, attentive opinions, facts, and industry validated market data. The research study provides estimates for Global…
PC Zombies Bent on Destruction
Jersey City, NJ, October 08, 2009 - There may be a simple explanation when a PC slows down. It may just have too many files in storage. The explanation is often more sinister. The PC may have gone over to the dark side.
PCs today can acquire infections that turn them into zombies. Infected PCs' owners may only notice that the PCs respond a little slower than usual. The reason infected…