openPR Logo
Press release

Expansion of Automotive Performance Tuning and Engine Remapping Services Market to Remain Consistent During 2018 - 2028

01-15-2019 11:18 AM CET | Logistics & Transport

Press release from: Future Market Insights

Expansion of Automotive Performance Tuning and Engine

Automotive performance tuning and engine remapping services is a new entrant in the field of automotive allied businesses. Although, the concept has been reciprocating around since World War II, with the introduction of ECUs/EMS (Engine Management System), the market for this sector has boosted up significantly.

Various vehicles nowadays, including cars, motorcycles, trucks and buses are equipped with Engine Control Units (ECUs). Any Engine remapping can only be performed on the vehicles having the ECUs installed. The basic concept behind Engine or ECU remapping is overwriting the installed maps with custom maps using software and other tools like dynamometer. Engine maps are the codes that command the engine to perform accordingly. By altering these codes, the various parameters of an engine can be altered. Parameters like valve timings, injection quantity, duration & pressure, boost pressure, spark advance, torque, power etc., can be manipulated with the help of remaps. The main objective of performance tuning is about efficient combustion of air-fuel mixture. Performance tuning doesn’t only limit to upgrades and remaps but also includes overhauls such as boring and stroking where the engine bore diameter and the crankshafts are altered, WOT (Wide Open Throttle) or Italian Tune-Up where the vehicle is driven at full throttle to burn down all the built up carbon inside the engine. This is mainly done for cars that are short driven at lower speeds.

Request For Report Sample @ https://www.futuremarketinsights.com/reports/sample/rep-gb-6443

Engine remaps can be done in a number of ways such as, through OBD (On-Board Diagnostic) port, bench tuning and chipping. There are in total three stages of performance tuning. In stage one, the ECU of a car engine is remapped as per the available resources without adding any upgrades such as hybrid turbos, intercoolers, exhaust pipes and related kits. This ensures better performance without compensating the fuel economy. Stage two is accomplishment of stage one with some minor upgrades that account for even better performance and fuel economy. The stage three is something where the ultimate potential of an engine is drawn out with the help of more complex maps and larger upgrades. Engine remaps are considered important for better performance, efficient fuel burning and longer life of the engine.

Automotive Performance Tuning and Engine Remapping Services Market: Dynamics

Vehicles manufactured are oftentimes under tuned so as to suit in all kinds of terrains and environments. Another reason for under tuning is that, it brings in scope for the automobile manufacturers to come up with a facelift model. Therefore, the engines are never allowed to reach their maximum potential. This very fact has encouraged the buyers to buy a lower end variant that offers less power and get it performance tuned to an extent where it can perform better in competence with the face lifted model, which comes at a higher price tag. This move by the buyers has influenced growth in the scope for automotive performance tuning and engine remapping services and has been driving the market since its inception.

Yet another driver for the market is the car racing competitions. Race cars engines are often tuned to their complete potential by altering the pre-installed maps and upgrading the accessories. This has influenced the tuners to build the custom maps which can attribute to better outputs. The whole new trend in the current performance tuning market is automotive acoustics. In this type of tuning, the exhaust sound is pitched louder by adding some extra accessories to the exhaust system such as a larger muffler. This is basically done by decreasing the backpressure on the engine by installing free-flowing exhaust systems. Increased level of engine noise gives a staggering feeling to the vehicle owners.

However, it is being prohibited in various countries that are concerned about the noise pollution. A plus point to the market is that there are no government or environmental regulations levied on getting one’s vehicle tuned-up. The major restraint observed in this market is that if the performance tuning and engine remapping requires qualified professionals which are currently limited, without which engine malfunction can occur thereby endorsed by few customers. Low level of awareness regarding this concept in developing countries has also been responsible to retard the market growth.

Automotive Performance Tuning and Engine Remapping Services Market: Segmentation

On the basis of Vehicle type, the Global Automotive Performance Tuning and Engine Remapping Services Market can be segmented into:

Cars
Bikes
Trucks, Buses & Tractors
On the basis of Fuel type, the Global Automotive Performance Tuning and Engine Remapping Services Market can be segmented into:

Petrol
Diesel
High Octane fuel
Low Octane fuel
On the basis of tuning stages, the Global Automotive Performance Tuning and Engine Remapping Services Market can be segmented into:

Stage One
Stage Two
Stage Three
On the basis of tuning method, the Global Automotive Performance Tuning and Engine Remapping Services Market can be segmented into:

Through OBD Port
Bench Tuning
Chipping
On the basis of applications and end-users, the Global Automotive Performance Tuning and Engine Remapping Services Market can be segmented into:

Racing
Fuel Economizing
Performance Enthusiasts
Automotive Performance Tuning and Engine Remapping Services Market: Regional Outlook

Automotive performance tuning and engine remapping services are gradually penetrating in to all the regions except MEA. Automotive performance enthusiasts are increasingly preferring the remaps on their vehicles in regions like Europe, U.S, Canada, Latin America, Australia & New Zealand, India, China, Japan, and South Korea. The market is in its introduction stage and has seen a drastic improvement in the demand for the same within last decade. The performance tuning market foresees itself a good fortune especially in the developed regions like Europe, North America, Japan and Australia. The market is anticipated to grow significantly in the developing regions as well.

Request For Report Table of Content (TOC): https://www.futuremarketinsights.com/toc/rep-gb-6443

Automotive Performance Tuning and Engine Remapping Services Market: Key Players

Examples of some of the market participants identified across the value chain of the Automotive Performance Tuning and Engine Remapping Services Market are:

Roo Systems
Turbo Dynamics
Tuning Works Inc.
Ecutech Tune
APTuning
TuneOTronics
Quantum Tuning

About Us
Future Market Insights is the premier provider of market intelligence and consulting services, serving clients in over 150 countries. FMI is headquartered in London, the global financial capital, and has delivery centres in the U.S. and India.
FMI’s research and consulting services help businesses around the globe navigate the challenges in a rapidly evolving marketplace with confidence and clarity. Our customised and syndicated market research reports deliver actionable insights that drive sustainable growth. We continuously track emerging trends and events in a broad range of end industries to ensure our clients prepare for the evolving needs of their consumers.

Contact Us
U.S. Office
616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
United States
T: +1-347-918-3531
F: +1-845-579-5705
Email: sales@futuremarketinsights.com
Web: https://www.futuremarketinsights.com/

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Expansion of Automotive Performance Tuning and Engine Remapping Services Market to Remain Consistent During 2018 - 2028 here

News-ID: 1498398 • Views:

More Releases from Future Market Insights

Global Lithium Ion Battery Separator Market Projected to Reach US$ 3,256.7 Million by 2032
Global Lithium Ion Battery Separator Market Projected to Reach US$ 3,256.7 Milli …
The lithium-ion battery separator is a critical component in lithium-ion batteries, responsible for preventing short circuits and ensuring safe and efficient battery performance. It acts as a physical barrier between the positive and negative electrodes, allowing lithium ions to pass through while blocking the flow of electrons. With advancements in separator technology, these separators play a key role in enhancing battery capacity, cycle life, and overall safety in various applications,
Industrial Drums Market on a Trajectory to Reach US$ 17.6 Billion by 2027, Bolstered by a Robust 7.1% CAGR from 2022
Industrial Drums Market on a Trajectory to Reach US$ 17.6 Billion by 2027, Bolst …
The Industrial Drums Market is experiencing a steady and promising trajectory, with an estimated value of US$ 12.5 billion in 2022, projected to escalate to US$ 17.6 billion by 2027 at a commendable Compound Annual Growth Rate (CAGR) of 7.1%. This growth is substantiated by a 6.6% CAGR in volume during 2022-27, as per Future Market Insights. Anticipated to expand 1.5 times within this period, the market presents alluring prospects for industry
Supermarkets, Convenience Stores, and Eco-friendly Choices Fuel the Expansion of the Metal Cans Industry, Catering to Health-conscious and Environmentally-aware Consumers
Supermarkets, Convenience Stores, and Eco-friendly Choices Fuel the Expansion of …
The metal cans market is predicted to grow at a CAGR of 5% over the forecast period, according to research by Future Market Insights. The industry's estimated value is expected to increase from US$ 56 Bn in 2023 to US$ 91.1 Bn by 2033. The market for metal cans has been driven by the heightened demand for the product in food and beverages industry. Metal cans helps prolong shelf-life of perishable
Folding IBCs Market Poised for Growth: Expected to Reach US$ 528 Million by 2027 with a 4.8% CAGR
Folding IBCs Market Poised for Growth: Expected to Reach US$ 528 Million by 2027 …
The folding intermediate bulk containers (IBCs) market is on a growth trajectory, with an estimated value of US$ 418 million in 2022, projected to reach US$ 528 million by 2027, showcasing a Compound Annual Growth Rate (CAGR) of 4.8%. Remarkably, the China folding IBCs market defied initial pandemic-related skepticism and is anticipated to grow by 6.9% year on year in 2022. Despite global challenges, China's folding IBCs market is poised to contribute

All 5 Releases


More Releases for Engine

Global Aero-engine Market Study 2019-2025 by Segment (Piston Engine, Gas Turbine …
MarketResearchNest Reports adds “Global Aero-engine Market Study 2015-2025, by Segment (Piston Engine, Gas Turbine Engine, Other Engine), by Market (Commercial Aircrafts, Military AircraftsGas Turbine Engine), by Company (Pratt & Whitney, GE, Rolls-Royce)” new report to its research database. The report spread across 67 pages with multiple tables and figures in it. Snapshot An aero-engine or aircraft engine is the component of the propulsion system for an aircraft that generates mechanical power.
Aircraft Engine Fuel Systems Market Report 2018: Segmentation by Type (Jet Engin …
Global Aircraft Engine Fuel Systems market research report provides company profile for Triumph Group, GKN Plc, Honeywell International, Zodiac Aerospace, Meggitt, Eaton Corporation, Parker Hannifin, United Technologies and Others. This market study includes data about consumer perspective, comprehensive analysis, statistics, market share, company performances (Stocks), historical analysis 2012 to 2017, market forecast 2018 to 2025 in terms of volume, revenue, YOY growth rate, and CAGR for the year 2018 to
V Engine Market Report 2018: Segmentation by Product (V2-V10 Engine, V10-V20 Eng …
Global V Engine market research report provides company profile for Ford, Volkswagen, Ferrari, Lamborghini, Mercedes-Benz, BMW, Porsche, Harley-Davidson, Rolls Royce, GM, Jaguar Land Rover, Dodge and Others. This market study includes data about consumer perspective, comprehensive analysis, statistics, market share, company performances (Stocks), historical analysis 2012 to 2017, market forecast 2018 to 2025 in terms of volume, revenue, YOY growth rate, and CAGR for the year 2018 to 2025, etc.
Vehicle Engine and Engine Parts Market : Global Snapshot Analysis to 2020
A new research study titled, “Market” has been added to the comprehensive repository of Orbis Research. Global vehicle engine and engine parts manufacturing market is currently in a very crucial phase of transformation. Low oil prices and increased economic activity because of a rise in disposable income drove the vehicle engine and engine parts manufacturing market. This trend was mainly driven by countries in Asia, South America, and Africa where
Engine Mounts and Engine Global Market by Engine Mount & Data Validation, Foreca …
According to Publisher, the Global Engine Mounts and Engine market is expected to grow from $62.36 billion in 2015 to reach $97.45 billion by 2022 with a CAGR of 6.58%. The rising demand for comfort vehicles and high power engine cars, growing demand for high quality natural rubber, with high load transport capability engines are the factors driving the automotive engine market. Increasing demand for engine downsizing with high engine
Global Aircraft Engines Market In Japan: By Aircraft Type - Turboprop Engine, Tu …
Researchmoz added Most up-to-date research on "Global Aircraft Engines Market In Japan: By Aircraft Type - Turboprop Engine, Turbofan Engine, Turboshaft Engine & Piston Engine" to its huge collection of research reports. The global Aircraft Engines market is valued at XX million USD in 2016 and is expected to reach XX million USD by the end of 2017, growing at a CAGR of XX% between 2016 and 2022. Japan plays an important