roTeg presents trendsetting gripper solutions for robot systems at Automatica’s user forum
This year’s participation in the trade fair for automation and mechatronics, already taking place for the fourth time, this year focusing on robotics turned out a great success for roTeg. Many potential buyers were informed about trendsetting technologies from the domain of automatic palletising. The presentation of intelligent systems standing out by flexible gripping tools as well as user-friendly and adaptable control software was a central point with roTeg. A palletising-robot system of the PARO® type with multifunctional gripper for the simultaneous handling of different package types served as an application example. A combined tongs-suction gripper alternately palletised canisters and boxes while being able to grab differing numbers of packages per cycle.
Automatica revealed a noticeable trend towards a rising demand and interest for automation. Not only the high amount of 31,000 professional visitors from 114 countries but also the potential buyers’ animated participation in the discussions at Automatica Forum indicated an end of the economic crisis in the domain of automation. In this context, the expert lecture “Intelligence from a machine: how controls and gripping systems work as a team” by roTeg managing director Dr.-Ing. Thomas Graefenstein was followed with great interest. The panel discussion between experts and potential buyers showed a great interest in intelligent automation solutions.
roTeg has been active in robotics industry since 1993 and has grown to be a specialist for palletising technology due to its innovative ideas. A further focus lies on special-machine construction for power-plant technology and automation solutions in explosive refinery areas. Well-known companies of all industries have been profiting from the solutions developed by the creative engineering team and manufactured by the in-house production.
The palletising robots in combination with their gripping systems and control software produced by roTeg form an extremely reliable and simply operable robot system. Depending on the requirement profile, a corresponding model of PARO will be offered for the optimised application in the company. The aim of the development is to take as much work as possible from the operator while offering flexibility. The robust construction and the constantly auto-diagnosing system guarantee for a high availability and process stability. Product changes or even the programming of new package patterns can be entered by the operating staff by means of the menu navigation. Due to the application of multifunctional grippers, the exchange of the gripping tool becomes obsolete, which adds up to the efficiency of the intelligent system. The flexible robot system with its timely control is adjustable to new tasks in the expanding market.
p.: +49 (0) 231 / 9742-380
f.: +49 (0) 231 / 9742-380
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release roTeg presents trendsetting gripper solutions for robot systems at Automatica’s user forum here
News-ID: 136374 • Views: 1866
More Releases from roTeg AG
Fachpack 2010: roTeg shows PARO palletising robot as compact cell
PARO palletising robot for different types of packages in limited spaces The Dortmund-based company roTeg will show different palletising robots of the PARO type at Fachpack in Nuremberg. The compact robot is suitable for all branches of trade and demonstrates its flexibility by means of combinatory grippers and the generation of mixed pallets. At booth 3-406 of the trade fair for packaging solutions, roTeg AG will present palletising robots with compact dimensions.
Robot Technology in the Ascendant
Multi Talent PARO® Juggles with Balls At the shared booth of the Ministry of Economic Affairs and Energy of the State of North Rhine-Westphalia, the PARO® palletising robot demonstrated its skills and flexibility when handling unusual package types: In addition to boxes, also balls were palletised in Hannover this year. The PARO® robot, originally designed for palletising processes at the end of production lines, placed balls onto an air stream at the
PARO Robot at the Hanover Trade Fair
roTeg AG to display the latest developments in robot palletting technology at North Rhine-Westphalia's joint stand Dortmund, März 2009 – At the Hanover Industrial Trade Fair in April 2009 Dortmund-based roTeg AG will be exhibiting modern automation technology. The PARO palletising robot with its PARO Control system is suitable for all industries and can be operated without any knowledge of programming. The engineering company roTeg AG will be exhibiting innovations in the
PARO at special-event area of Anuga FoodTec
roTeg AG takes care of palletising at the end of Robotik-Pack-Line Dortmund, Germany, January 2009 – Robotik-Pack-Line presents a complete production line for mini burgers at the special-event area of Anuga FoodTec in March 2009. After production and packaging of the food, the PARO palletising-robot system does the palletising of the trays. As a team partner of Robotik-Pack-Line, roTeg AG presents the new technology of the PARO palletising robot. A complete production
More Releases for Automatica
Eyes on the Future: FRAMOS will be showcasing its innovative automation technolo …
Imaging is one of the key technologies for automation and is a driver for the introduction of smart factories. Automatica 2016, the trade fair for automation and mechatronics, held in Munich from 21 to 24 June, will present new and ongoing developments in the industrial imaging sector for service robotics and human-machine collaboration. Imaging specialist FRAMOS will be exhibiting its range of innovative automation technologies from sensors to complete
Efficient process automation and optimized offline programming with CENIT
CENIT at the AUTOMATICA 2012, Hall B2, Booth 129 Stuttgart, 17 April 2012 – At this year’s AUTOMATICA from 22 to 25 May in Munich, CENIT will showcase innovative solutions from FASTSUITE, a proprietary product toolbox for automating manufacturing processes. CENIT’s participation in the trade fair will concentrate on the FASTSUITE solutions as they apply to the field of robotics. Under the motto “Efficiency just needs one solution”, CENIT’s product lifecycle
Automatica 2012: Customized solutions from Montech
At Automatica in Munich, Montech AG (Booth 111 in Hall A2) is presenting customized solutions based on their portfolio of belt conveyors and automation components. Among several solutions, the Swiss manufacturer of transport systems is showing an application with a transfer system combined with a vacuum conveyor to carry and sort CDs: after sorting the vacuum conveyor transfers CDs, then a closed loop transfer system carries away the CD stack. “It’s
Vitronic Enjoys Lucrative Success at Automatica 2010
Vision systems specialist Vitronic reports outstanding success from Automatica 2010, which took place earlier this month in Munich, Germany. The company demonstrated its renowned VIROwsi weld seam inspection system with a new compact sensor head. It proved a hit with show visitors, who inundated Vitronic’s engineers with enquiries. Automatica is an international trade fair in automation and mechatronics. A key event for manufacturers and buyers alike, it attracts hundreds of exhibiting
Automatica: Montech introduces new conveyor solutions
At Automatica 2010 in Munich, Montech is introducing a new multitrack conveyor. Other highlights include a special application of Montrac and the full range of belt conveyors, automation components and solar conveyors. At Automatica and Intersolar, taking place concurrently in Munich, visitors at the Montech stand 318 in hall B1 will find consolidated solutions and the latest innovations for transport, handling and intralogistics from the Swiss company. New: multitrack conveyor To
MVTec Presents New 3D Methods at AUTOMATICA
For the first time, MVTec Software GmbH (Munich, Germany), manufacturer of standard software for machine vision, will showcase a preview of the new version HALCON 10 with live demos at the AUTOMATICA. A further highlight will be the topic “Green Automation”. World Premiere: New Version of HALCON HALCON 10 will further advance powerful 3D vision. As a worldwide premiere, MVTec will showcase a live demo running HALCON’s new surface-based 3D matching