Press release
Growth expectations for the wood processing machinery sector slightly higher than for machinery industry until 2020 - Quest industry report
Growth expectations to 2010 with wood processing machines
The Quest industry report compares the growth expectations of the woodworking machinery sector with those of the mechanical engineering industry. The data on this comes from a market survey by Quest TechnoMarketing, which examined the use of servo drives on the machines until 2020.
The growth expectations up to 2020 in the German machinery industry in terms of machine production are 5.5% per year. Machine-builders in the wood processing machinery sector are slightly more optimistic with growth expectations of 6.0% per annum.
The extent of the growth shows clear differences between wood processing machines and machinery industry.
Almost every second machine-builder expects machine production to stagnate by 2020 (44%), while only every tenth manufacturer of wood processing machines expects this to happen in the case of wood processing machines.
90% of the machine-builders of wood processing machines expect growth of up to 5% per year and of over 5% to 10% per year, respectively. In the machinery industry only a good third of machine-builders (38%) have such expectations.
None of the manufacturers of wood processing machines expect a decline in production by 2020. In the machinery industry this affects 1% of machine builders.
The Quest industry report is available on https://www.quest-trendmagazine.com/en/machinery-industry/wood-processing-machines/growth-expectations-in-sector-wood-processing-machines.html
Another Quest industry report highlights the difficult production environment for wood processing machines on https://www.quest-trendmagazine.com/en/machinery-industry/wood-processing-machines/production-and-sales-of-wood-processing-machines.html
About Quest Trend Magazine:
Quest Trend Magazine publishes trends in automation from the users's point of view mainly in machinery industry, automotive and F&B industry. The economic backdrop of these trends is highlighted as well.
The trends in automation technology are based on market surveys by Quest TechnoMarketing. The economic backdrop is analyzed by Quest Research, a department of Quest TechnoMarketing.
About Quest TechnoMarketing:
Quest TechnoMarketing, Bochum, London, is specialized in market surveys and marketing for the automation technology for more than 20 years and the publisher of the Quest Trend Magazine.
Thomas Quest
Quest Trend Magazine
Dibergstr. 64
44789 Bochum, Germany
Phone +49 234-34777
Fax +49 234-33 22 02
Email: media@quest-trendmagazine.com
Internet: https://www.quest-trendmagazine.com
Quest TechnoMarketing
Thomas Quest
Dibergstr. 64
44789 Bochum, Germany
Phone +49 234-34777
Fax +49 234-33 22 02
Email: media@quest-technomarketing.com
Internet: https://www.quest-technomarketing.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Growth expectations for the wood processing machinery sector slightly higher than for machinery industry until 2020 - Quest industry report here
News-ID: 1338666 • Views: …
More Releases from Quest Trend Magazine
China, the USA increase market share in world car production, Japan, Germany los …
The new Quest Trend Report establishes the ranking of the world market shares of the automotive countries and lists their market shares for 2018 and in comparison to 2010.
In the ranking of the ten largest automotive countries in the period from 2010 to 2018, only first place, China, and tenth place, France, remained unchanged. The eight other automotive countries changed their position among the ten largest automotive countries.
The world's…
Global automobile production has been stagnating since the global economic crisi …
The new Quest Trend Report analyzes global auto production since the global economic crisis of 2007 to 2018 and the contribution of China and its market share to global auto production.
World car production plunged to its crisis low in 2009. But one year later it had not only left this crisis low behind it, it had even surpassed its pre-crisis level! The jump in world car production was not primarily…
Automobile production in Germany: Trend change from growth to decline – new Qu …
The change in trend has been taking place in the German automotive industry since mid-2018, as the updated economic report in the Quest Trend Magazine shows.
The monthly updated economic report covers the period from 2008 to 2019 May. The trend in production and sales in the German automotive industry is methodically determined as the average of the last twelve months.
The trend in automobile production in Germany surpassed its pre-crisis…
Germany's industrial production growing at 2% p.a., stagnation likely for 2019
The new Quest Economic Report examines the trend growth of industrial production in Germany and combines the current situation with a trend forecast.
The new Quest Economic Report examines the trend growth of industrial production in Germany. The trend is defined as the moving average of the last 12 months. The report divides the trend in industrial production into two phases since 2008.
Only at the end of 2015 the trend…
More Releases for TechnoMarketing
Latest Feedback of the German Machinery Industry on Industry 4.0 - New Report in …
Along the market survey from Quest TechnoMarketing about the engineering of the machine automation until 2017 the machine-builders also assessed “what Industry 4.0 is supposed to mean for the engineering of the machine until 2017”.
80% of the investigated machine-builders in the ten sectors of the German machinery industry provided their feedback to this question. The following numbers refer to these machine-builders.
The open question without further specifications invited to a…
Electric linear actuators have been growing for 10 years
Bochum, July 14, 2010. During the last 10 years from 2001 to 2010 the use of electric linear actuators in the German machinery industry has increased fivefold.
So the portion of the machine-builders using electric linear actuators at the machines increased from 3,5% to 19%.
Linear actuators produce a straight-line resp. translational motion. So e.g. the hot glue nozzle of a packaging machine can be guided straight-lined across a paper…
RFID - constantly and throughout the machinery industry implemented
Bochum, July 5, 2010. This year 14% of the machine-builders intend to implement RFID at the machines.
RFID stands for radio frequency identification and provides the wireless identification of goods, semi-manufactures or workpieces in the industrial sector.
Last year 15% of the machine-builders wanted to implement RFID at the machines. So RFID shows a constant implementation during the last two years.
This implementation is taking place with all or almost all of…
Intensified interest in application-optimised I/O modules
Bochum, June 15, 2010. The machine-builders are intensified interested in application-optimised I/O modules this year. This confirms the trend to fine-tuning the control and drive technologies that determines the changes in the automation technology this year.
With 11% each tenth machine-builders intend to change to application-optimised I/O modules this year. That is an increase in relation to the previous year by more than one third as this value was 8%.
What application-optimised…
Panel PC benefits from the current trend to fine-tuning the control technology
Bochum, 7th June 2010. Machine-builders prefer fine-tuning the control technology this year. This means to improve the consisting control technology at the machines instead of changing the control technology. The Panel PC benefits from this current trend.
Panel PC means operator panel with integrated control system. Compared with other control technologies such as PLC, PC, microprocessor control, CNC or contactor-based control technology the Panel PC shows the highest portion with new…
The trends in the automation - start of the serial „automation, supplier struc …
Bochum, May 25, 2010. The Quest Trend Magazine has recently published the first part of a three-part series of articles to the topic „automation, supplier structure, economic crisis“. It concerns the connection between automation technology, its suppliers and the economic crisis.
By now two main trends in the automation technology have been appearing. The first main trend of the automation substituted the electro-mechanics by microelectronics. The second main trend consists of…
