Press release
DÜRR NDT releases hi-res wireless Flat Panel Detector for Industrial Radiography
DRC 2430 NDT
The heavy duty one-piece aluminum housing ensures maximum protection against the external environment with the unit being both dust-tight and waterproof (IP67 classification according to IEC 60529).
Images produced by the DRC 2430 NDT feature both excellent contrast and industry-leading high resolution owing to the 76 μm pixel pitch. The active area of 23.3 x 29.1 cm and wide operating temperature range of 0 to 45 °C make the DRC 2430 NDT suitable for a large variety of inspection tasks and outdoor environments.
Wireless data transmission takes place via an in-built WLAN access point (802.11n @ 5.2 GHz) and so no additional hardware is required to connect the detector to a WLAN-capable PC or local wireless network. The detector can of course also be used in a wired configuration via the Gigabit Ethernet network connection and optionally with a power supply. An integrated display provides a summary of the device status, including the current network configuration and battery state.
The supplied high-performance lithium batteries provide an operating time of up to 4 hours, allowing hundreds of shots per charge, thus avoiding unnecessary workflow interruptions. The battery charge level can also be read anytime directly on the battery itself via LED indicators.
The weight of just 3.2 kg makes the DRC 2430 NDT one of the lightest and most powerful industrial flat panel detectors in the NDT market.
The accompanying D-Tect X-ray inspection software fully supports the DRC 2430 NDT and provides necessary functions such as defect pixel mask creation as well as offset and gain calibration. Core functionality for image acquisition, analysis and reporting is of course provided within D-Tect, and in addition, DICONDE-compliant image data enables cross-system data exchange.
Further information and an overview of the complete flat panel detector range can be found at www.duerr-ndt.com.
DÜRR NDT is a German manufacturer of digital imaging systems for NDT – radiographic testing, such as CR imaging plate scanner, flat panel detectors (DDA), X-ray inspection software, automatic X-ray film processor, „green“ X-ray chemicals.
DÜRR NDT GmbH & Co. KG
Höpfigheimer Straße 22
74321 Bietigheim-Bissingen
Germany
Tel. +49 7142 99381-0
info@duerr-ndt.com
www.duerr-ndt.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release DÜRR NDT releases hi-res wireless Flat Panel Detector for Industrial Radiography here
News-ID: 1296818 • Views: …
More Releases from DÜRR NDT GmbH & Co. KG
DÜRR NDT's HD-CR 35 NDT Supports Bringing Astranis Satellites Into Orbit
Astranis is building small, low-cost telecommunications satellites to connect the four billion people on Earth who currently do not have access to the internet. The company is headquartered in San Francisco and has raised over $ 500 million from top global investors, with a team of over 300 world-class engineers. Founded in 2015 with an audacious mission: to connect the world by reducing the cost of internet services in rural and…
The Mariners' Museum and Park Explores Maritime History Using Digital X-ray Imag …
The Mariners' Museum and Park in Newport News, VA, USA, is home to the Batten Conservation Complex and the USS Monitor Center.
Within the Batten Conservation Complex, conservators specializing in archival documents, paper, objects, and archaeological materials work alongside a research scientist to stabilize and preserve the collection for generations to come. Researchers across the team continue to build the body of knowledge gleaned from the collection, uncovering the full stories…
DÜRR NDT Supports Digital Radiography Training in Australia
ATTAR (Advanced Technology Testing and Research), headquartered in Victoria, Australia with a team of around 45 employees provides a range of services such as non-destructive testing, failure analysis and forensic engineering, risk assessment services, and specialist testing of structures and vessels. ATTAR also provides year-wide training courses for all major NDT techniques such as radiography, ultrasonic, magnetic particle, and eddy current testing.
ATTAR has been using DÜRR NDT computed radiography scanners…
Seamless Digital RT Workflow with DRIVE NDT and D-Tect X from DÜRR NDT
For an optimal digital workflow in radiographic testing (RT), the X-ray inspection software D-Tect X can be integrated with the NDT management software DRIVE NDT. The closely meshed interaction between DRIVE NDT and D-Tect X means that a large part of the process takes place automatically. This not only saves time, but the automatic exchange of data also minimizes the possibility of human error. As all the steps and processes…
More Releases for DRC
DRC mining community prepares for BIG bash in Lubumbashi in June as DRC Mining W …
It's official, DRC Mining Week is back in Lubumbashi from 1-3 June, and to say that the industry is excited about its homecoming is an understatement. This long-running, award-winning and flagship expo and conference returns to the heart of the Copperbelt and the bustling mining hub of the DRC to celebrate the region's unlimited resilience, successes and opportunities.
The event boasts longstanding and loyal support from many sector leaders, including…
Returning to Lubumbashi: DRC Mining Week is “embracing the recovery”
“We are ready to embrace the recovery and celebrate the mining sector which has once again proven its resilience amidst a global and sweeping pandemic, says Emmanuelle Nicholls, the Group Director, Mining and Natural Resources at Clarion Events Africa, who have been the organisers of DRC Mining Week for the last 17 years.
“DRC is still an exciting destination for investors and business in the sector has by no means come…
Global interest in DRC mining as France, Germany, South Africa, UK and Zimbabwe …
The upcoming DRC Mining Week will have more international pavilions than any previous edition. This year’s indoor and outdoor mining expo and conference taking place from 19-21 June in Lubumbashi, will feature specialised sector-focused products, services and technology with country pavilions from France, Germany, South Africa, the United Kingdom and Zimbabwe.
More than 3500 international mining experts and local stakeholders from more than 50 countries are expected to attend this…
JENNIFER WHITE LAUNCHES NEW WEBSITE THANKS TO DRC WEB DESIGN
Ottawa-based lawyer and investigator, Jennifer White, has just launched her brand new website thanks to DRC Web Design.
Jennifer White came to DRC Web Design after meeting with Domenica Agostini through their mutual work in law within the city of Ottawa. She has established herself in the city by working alongside companies in the private and public sectors investigating allegations of harassment, discrimination, sexual harassment and sexual violence.
As a…
FBNBank DRC SA returns as diamond sponsor at DRC Mining Week in Lubumbashi in Ju …
“Our presence at DRC Mining Week is to reinforce our commitment to the industry and assure all stakeholders that FBNBank DRC SA remains a key player in the economic development of DRC. This is according to Akeem Oladele, MD of FBNBank DRC SA, a returning diamond sponsor of DRC Mining Week, taking place in Lubumbashi from 13-15 June.
He adds: “our participation in the DRC Mining Week last year was one…
DRC Mining Week announces official support for non-profit BUMI
DRC Mining Week press releases“We hear a lot about child labour in the mining industry, and although we see mining companies strengthening their procedures to prevent illegal (and underage) miners, we don’t see enough alternatives offered to the youth upstream.” This is according to Sarah Moser, project coordinator at the BUMI non-profit organization, located in Kamalondo, Lubumbashi, and focused on helping orphaned and vulnerable children. BUMI is DRC Mining Week's…
