Press release
Thermal Spray Coating Market Comprehensive Analysis | Key Players - Oerlikon Metco, Praxair Surface technologies, H.C. Starck, A & A Coatings, Bodycote & More
Thermal Spray Coating
Global Thermal Spray Coating Market is estimated to exceed USD 13 billion by 2024; according to a new research report. Strong application outlook in medical devices, gas turbines and aerospace & automotive components, due to superior corrosion & wear resistance and cost-effective properties will drive thermal spray coating market. Increasing preference for HVOF process over hard chromium plating due to relatively shorter processing time and comparatively lesser environmental impact are among key factors fueling industry growth.
Rising demand for dimensional restoration, using as thermal barriers, electrical conductors and electromagnetic shielding will propel the flame spray coating demand. Moreover, ability to recoat damaged or worn substrates in several end-use industries including energy & power, marine and aerospace industry will provide positive outlook for product demand.
Request a sample of this premium Research Report at: https://www.marketstudyreport.com/request-a-sample/859966/
Combustion flame demand is expected to surpass 600 kilo tons by 2024. Increasing adoption for larger substrate applications particularly in oil & gas and aerospace industry are among major factors driving industry demand. Emergence of advanced technologies with improved performance including HVOF and HVAF process will support business growth.
Global thermal spray coating market was led by North America accounting for more than 30% in 2016. Presence of major aerospace and automotive companies along with comparatively higher adoption of flame spray coating will propel regional demand.
Global flame spray coating market share is moderately consolidated with top three players accounting for more than 30% of the industry share. Oerlikon Metco, Praxair Surface technologies, H.C. Starck, A & A Coatings and Bodycote are among major industry players. Collaborations, joint ventures and long-term agreements among different participants across the value chain are major strategies observed.
Request a discount on standard prices of this premium report at: https://www.marketstudyreport.com/check-for-discount/859966/
Table of Content:
Chapter 1 Methodology & Scope
1.1 Methodology
1.1.1 Initial data exploration
1.1.2 Statistical model and forecast
1.1.3 Industry Insights and validation
1.1.4 Definitions & assumptions
1.1.5 Forecast parameters & considerations
1.2 Data Sources
1.2.1 Primary
1.2.2 Secondary
Chapter 2 Executive Summary
2.1 Thermal spray coating industry 360 degree synopsis, 2013 - 2024
2.1.1 Business trends
2.1.2 Material trends
2.1.3 Process trends
2.1.4 End-use industry trends
2.1.5 Regional trends
Chapter 3 Thermal Spray Coating Industry Insights
3.1 Industry segmentation
3.2 Industry landscape, 2013- 2024
3.3 Industry ecosystem analysis
3.3.1 Distribution channel analysis
3.3.2 Profit margin trends
3.3.3 Vendor matrix
3.4 Technology landscape
3.4.1 Combustion flame
3.4.1.1 Low velocity
3.4.1.2 The High-Velocity Oxygen Fuel (HVOF)
3.4.1.3 Detonation
3.4.2 Electrical energy
3.4.2.1 Two-wire electric arc spraying
3.4.2.2 Plasma spray
3.4.2.3 Cold spray
3.5 Regulatory landscape
3.5.1 North America
Read more info on in report: https://www.marketstudyreport.com/reports/thermal-spray-coating-market
About Us:
Marketstudyreport.com allows you to manage and control all corporate research purchases to consolidate billing and vendor management. You can eliminate duplicate purchases and customize your content and license management.
Contact Us:
Market Study Report
4 North Main Street,
Selbyville, Delaware 19975
USA
Phone: 1-302-273-0910
US Toll Free: 1-866-764-2150
Email: sales@marketstudyreport.com
Web site: https://www.marketstudyreport.com
Blog: https://www.marketstudyreport.com/blog/
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Thermal Spray Coating Market Comprehensive Analysis | Key Players - Oerlikon Metco, Praxair Surface technologies, H.C. Starck, A & A Coatings, Bodycote & More here
News-ID: 1212072 • Views: …
More Releases from marketstudyreport.com
Load Bank Market Growth Prospectus by 2028 - Business Opportunities by ASCO Powe …
A concise assortment of data on the 'Load Bank Market' offers an exhaustive study targeting current market trends influencing the business across assorted regions. Significant details related to market size, market share, applications, and statistics are put together to convey an ensemble prediction of the industry. The research further focuses on comprehensive competitor analysis in addition to highlighting growth strategies embraced by market leaders.
Load Bank Market Size was estimated…
Agriculture Equipment Market is Expected to Reach USD 161640 Million by 2028 - J …
Global Agriculture Equipment Market with respect to the pivotal drivers influencing the revenue graph of this business sphere. The current trends of the market with the geographical landscape, demand, remuneration scale, and growth of this vertical have also been included in this report.
Global Agriculture Equipment Market Size was estimated at USD 114110 million in 2021 and is projected to reach USD 161640 million by 2028, exhibiting a CAGR of…
Electric Vehicle Market Size to grow at a CAGR of 23.5% through 2028| Tesla Inc. …
Global Electric Vehicle Market with respect to the pivotal drivers influencing the revenue graph of this business sphere. The current trends of market with the geographical landscape, demand, remuneration scale, and growth of this vertical have also been included in this report.
The electric vehicles (EVs) market is estimated to witness a robust growth rate of 23.5% during the period 2019-2028.
The operation is done to stop ligament tears and…
Fuel Cell Air Compressor Market is Expected to Reach USD 512.3 Million by 2028 - …
Global Fuel Cell Air Compressor Market with respect to the pivotal drivers influencing the revenue graph of this business sphere. The current trends of market with the geographical landscape, demand, remuneration scale, and growth of this vertical have also been included in this report.
Global Fuel Cell Air Compressor Market Size was estimated at USD 215.1 million in 2021 and is projected to reach USD 512.3 million by 2028, exhibiting…
More Releases for Thermal
Thermal Weeder Market
Thermal Weeder Market Value is Anticipated to Increase at a Stable CAGR over the Forecast Period (2023 to 2029). It provides an in-depth analysis of the market segments which include products, applications, and competitor analysis.
Important changes in the business allow key players to attain larger profits. This Thermal WeederMarket study report is the best way to make changes with the help of entire market condition and metrics provided here. These…
Rising Demand for Thermal Analysis Techniques to Boost Differential thermal anal …
[San Francisco, USA] - Market research firm Trouve360Reports has added a latest report on the global differential thermal analysis market. The report offers a comprehensive analysis of the market, providing insights into key trends, growth drivers, and challenges that are shaping the industry.
The report presents a detailed market introduction, highlighting the definition of differential thermal analysis and its applications in various industries. The market overview section of the report offers…
Thermal Carbon Black Products (Low Thermal, Medium Thermal, High Thermal) Market …
According to Market Study Report, Thermal Carbon Black Products (Low Thermal, Medium Thermal, High Thermal) Market provides a comprehensive analysis of the Thermal Carbon Black Products (Low Thermal, Medium Thermal, High Thermal) Market segments, including their dynamics, size, growth, regulatory requirements, competitive landscape, and emerging opportunities of global industry. An exclusive data offered in this report is collected by research and industry experts team.
Get Free Sample PDF (including full TOC,…
What is the Difference Between Direct Thermal and Thermal Transfer Labels?
Northern Label Systems, specialists in supplying high quality labels explain the differences between Direct Thermal https://www.northern-label-systems.co.uk/labels-by-type/direct-thermal-labels and Thermal Transfer Labels https://www.northern-label-systems.co.uk/labels-by-type/thermal-transfer-labels
Thermal Transfer printing uses an ink ribbon to transfer the printed image from the heated printhead of the label printer onto the surface of the label while Direct Thermal printing transfers the image directly onto a heat sensitive material.
There are advantages and disadvantages to both methods. Direct Thermal label…
Global Thermal Transfer Material Market, Global Thermal Transfer Material Indust …
Thermal conductivity refers as an important characteristic for several manufacturing operations. Thermal transfer properties of a variety of materials are effective in certain applications owing to natural molecular structure that allows for direct heat-transfer. Thermal transfer materials are extensively used to manufacture the heat conductive adhesive tapes, printable products and polymer sheets. These polymer sheets are utilized for barcodes, labeling, and QR code labels for retailing, logistics, and consumer goods.…
Global Thermal Carbon Black Products (Low Thermal, Medium Thermal, High Thermal) …
Qyresearchreports include new market research report "Global Thermal Carbon Black Products (Low Thermal, Medium Thermal, High Thermal) Sales Market Report 2018" to its huge collection of research reports.
This report studies the global Thermal Carbon Black Products (Low Thermal, Medium Thermal, High Thermal) market status and forecast, categorizes the global Thermal Carbon Black Products (Low Thermal, Medium Thermal, High Thermal) market size (value & volume) by key players, type, application, and…
