Euro Steel: Meeting All Your Stainless Steel and Aluminium Requirements
Stainless Steel Products Available at Euro Steel
Euro Steel is a member of SASSDA South African Stainless Steel Development Association and always keeps the grades in mind.
Sheet: Grades- 3CR12, 430, 304L, 316L, 310, 310S, 409. 441, 444. Ability to be tolerant to ASTM A480M, mechanical to ASTM A240, chemical to ASTM A240, and ASME.
Plate: Mostly available in a No. 1 finish, hot rolled finish. The plates are also cold rolled and given a 2D finish. Tolerance ability is the same as stainless steel sheets.
Coil: Euro Steel offers an extensive range of cold rolled coils from 0.5 to 3mm thickness. Grades- 430, 304, 316.
Tread Plate: Available in all grades and 3CR12. Pattern types- “Boomerang” FLOOREX®, “Diamond” and “Butterfly/ H” patterns.
Decorative Finishes: Textured and brushed decorative finishes are available.
Pipes: Manufactured in accordance with ASME/ASTM SA/A312. Available in Austenitic, Duplex and Ferritic steels.
BSP Fittings: Manufactured in accordance to ASME/ASTM SA/A 182.
Valves: One-piece ball valves and three piece ball valves are available. Grade- 316.
Aluminium Products Available at Euro Steel
Sheet: Common alloys- 1050, 9017, 5251. Standard mill finishes and No.4 Satin Finish are available.
Plate: Common alloys- 1050, 5083, 6082. Plate thickness ranges from 3 to 100mm.
Coil: Common alloys- 1050, 9017, 5251. Standard mill finishes or No.4 Satin Finish is applied.
Tooling Plate: Common alloys- 5083, 6082, 7075. Thickness range is from 10 to >100mm.
Tread Plate: Alloy-1050, 4017. Available patterns are Tread Bright Plates and 5 Bar patterns.
Decorative Finishes: Textured and brushed decorative finishes are available in various sizes.
Extruded Tubing: Common alloys- 6063 T6. Aluminium hollow sections available in a wide range of shapes and sizes.
Extruded Sections: Square bars, round bars, flat bars and angles are available.
For more information about the stainless steel and aluminium products supplied by Euro Steel, please visit the website https://www.eurosteel.co.za/.
Euro Steel, based in South Africa has spread its wings into African. Being a part of AFMETCO group, the company follows all the norms regarding the grades of the stainless steel and aluminium used to manufacture the products. Euro Steel is known for its on-time delivery of high-quality products.
10 Commercial Rd, Wadeville, Germiston
1401, Gauteng, South Africa
Tel: + 27 (0) 86 123 3876
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Euro Steel: Meeting All Your Stainless Steel and Aluminium Requirements here
News-ID: 1209642 • Views: 410
More Releases from Euro Steel
Stainless Steel & Aluminium Supplier
Euro Steel is one of the largest suppliers of corrosion-resistant metals which includes stainless steel, aluminium, special steels and other metals. Euro Steel mainly operates in South Africa but is also active in the sub-Saharan region. The company provides plates, sheets, coils, valves, sections, pipes, tubes and many other forms of metal which are used commercially. The company is well known for its reliable services and high-quality products. Common Products Offered
Euro Steel-Full Range of Stainless Steel Products
Euro Steel is best known as South Africa’s largest local distributor as well as exporter of aluminium, stainless steel, corrosion-resistant materials and other special steels. The company operates from most of the major cities in South Africa. It also carries out its operations from Mozambique, Zambia and Namibia. Industries Supported by Euro Steel: Euro Steel supports several industries which includes petrochemicals, oil and gas, light engineering, rail, pulp and paper and mining
Distributors of Stainless Steel and Aluminium Products
Euro Steel is a South African Company that has established itself as one of the leading suppliers of stainless steel and aluminium products. Operating as a part of the AFMETCO group, the company strictly adheres to their guidelines in all their manufacturing processes. The Company operates not only throughout South Africa, but it also actively in Namibia, Zambia and Mozambique. Through its services and supply of high-quality steel and aluminium
Leading Distributor of Stainless Steel and Aluminium Products
Euro Steel is a reputed South African company that offers different types of products made of stainless steel, special steels and aluminium. The company strictly adheres to the guidelines of AFMETCO while manufacturing their products. The company also works actively in Zambia, Namibia and Mozambique and it supports different industries like sugar, petro-chemicals, engineering and mining. Some of the significant products manufactured by the company are illustrated below: Stainless Steel Products: At Euro
More Releases for Plate
Motorcycles: Universal number plate insert frame
D-Breisach a. R. / 05th April 2019. Those you wish to have a tidy rear at their motorcycle will now find a slim license plate frame from the German accessory manufacturer WUNDERKIND-Custom which convinces with its elegant design and many functional advantages. "Often, the simple number plate flutters about at a protruding and unattractive motorcycle rear – fixed only with two or three screws. For those who do not like it
Global Wear Plate Market Growth 2019-2024
Wear Plates are carbon steels used in high abrasion environments, such as in mining equipment, shredders or dumper bodies. Their wear resistance is typically measured in terms of indentation hardness. The market of global Wear Plate is relatively concentrated. SSAB and JFE are the largest supplier with market share of 21.35% and 11.18% respectively in 2016. Other leading companies include ThyssenKrupp, Dillinger, etc. Geographically, Europe region is the large production area with
Composite Plate Market
Composite Plate Market Research 2017 A market study ” Global Composite Plate Market ” examines the performance of the Composite Plate market 2017. It encloses an in-depth Research of the Composite Plate market state and the competitive landscape globally. This report analyzes the potential of Composite Plate market in the present and the future prospects from various angles in detail. The Global Composite Plate Market 2017 report includes Composite Plate market Revenue,
Global Tantalum Plate Market Research Report 2017
This report studies Tantalum Plate in Global market, especially in North America, Europe, China, Japan, Southeast Asia and India, focuses on top manufacturers in global market, with capacity, production, price, revenue and market share for each manufacturer, covering H.C. Starck Global Advanced Metals PLANSEE Ningxia Orient Western Metal Vascotube Changsha South Zhuzhou Jiabang ATI Metal Request Sample Report: http://www.reportbazzar.com/request-sample/?pid=908896&ptitle=Global+Tantalum+Plate+Market+Research+Report+2017&req=Sample Stanford Advanced Materials Baoji Zhongpu Admat Firmetal Market Segment by Regions, this report splits Global into several key Regions, with production, consumption, revenue, market share and growth
Federal Brace's Harrison Top Plate
October 25, 2016 - Charlotte, NC - The Harrison Top Plate is joining Federal Brace’s line of award-winning hidden countertop supports. This unique brace includes a central steel plate with two arms extending from each side, making it the perfect solution for a knee or pony wall application where support is needed on both sides for a lovely extended breakfast bar, reception counter, or the perfect serving area for upcoming
Turbocharger for plate processing
When atoms are supplied with additional energy via collisions or light, they release the excess. This is called ‘light amplification by stimulated emission of radiation’, in short: LASER. Plate processors are interested in speed and flexibility. Complex contours; clean, precise cutting edges; and low changeover times and costs. Thanks to automated loading and unloading, the latest laser systems speed up production. Solvaro GmbH, the manufacturer of metal components based in