Autoclaved Aerated Concrete (AAC) Market is Poised to Exhibit A Moderate 4.3% CAGR through 2017 to 2026
AAC Materials deemed as Eco-friendly & Superior Alternative to Conventional Construction Materials
AAC materials have emerged as a superior alternative to traditional bricks and concrete blocks. AAC also hold an edge in terms of supply strength and environmental impacts for lower energy consumption and waste recycling. AAC is produced with cement, fine aggregates, and expansion agents, causing the fresh mixture to expand. As compared to conventional concrete AAC sets and hardens faster. Such product attributes are extremely important for modern construction applications. Moreover, AAC blocks can be easily drilled, cut, milled, nailed and grooved to fit specific requirements.
AAC materials are an excellent thermal insulators and find application in architectural designs where sound absorption is a must-have. At the same time, fire resistance and mold resistance properties of AAC make it an apt construction materials for critical infrastructures. AAC is considered an eco-friendly and sustainable construction material. Manufacturing of AAC entails relatively lower amounts of energy and release minimum or zero pollutants. This is because the materials used in AAC manufacturing can be reused or simply put back into the mix, so waste concerns are negligible.
Request Report Sample@ https://www.factmr.com/connectus/sample?flag=S&rep_id=509
The vapor concentration and gasses produced during manufacturing process are in fact diffused through cellular anatomic structure of the AAC. Many environmental organizations including the International Institute for Healthy Construction and the Federal Association for Healthy Building Products propagate the information about AAC materials. Moreover, increased concerns over global warming and introduction of new international environmental policies is likely to partly drive the adoption of AAC during the review period.
3 Key Takeaways from Fact.MR’s Report on Autoclaved Aerated Concrete Market for Forecast Period 2017-2026
In terms of value and volume, Asia-Pacific excluding Japan (APEJ) will remain the largest market for autoclaved aerated concrete, closely followed by North America. Nearly half value share of the market is poised to be held by AAC sales in APEJ and North America collectively. Europe will also latch onto a major market revenue share, and will register a comparatively faster expansion than North America in the market through 2026.
On the basis of product type, sales of blocks are expected to remain significantly larger than that of panels and lintels combined. However, panels and lintels are projected to reflect a parallel sales expansion at a CAGR higher than sales of blocks through 2026.
AAC sales are expected to remain largest for end use in commercial construction and infrastructure construction, and are collectively forecast to close in approximately 90,000 thousand m3 by 2026-end.
Occupancy of several vendors has engendered the global market for autoclaved aerated concrete to be fragmented, however a handful of global vendors will continue to dominate the market. The report also estimates an influx of regional and local vendors in the market, driven by robust industrialization in developing economies. For retaining their position in the market, global vendors are adopting M&A strategies, while SMEs are directing their concentration toward enhancing their innovative capabilities. These SMEs are competing in terms of cost, performance, customer-centrism, and quality.
Request Report Methodology@ https://www.factmr.com/connectus/sample?flag=RM&rep_id=509
Key market players profiled by the report include Buildmate Projects Pvt. Ltd., Brickwell Infra Private Limited, Biltech Building Elements Limited, AKG Gazbeton, Aercon Florida Llc, Eastland Building Materials Co., Ltd., Aircrete Group N.V., Solbet Sp Z.O.O., UAL Industries Ltd., H+H International AS, ACICO Industries Co. KSC, JK Lakshmi Cement, Xella Group, CSR Ltd., and UltraTech Cement Ltd.
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.
11140 Rockville Pike
Rockville, MD 20852
Follow us in Linkedin: https://www.linkedin.com/company/factmr/
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Autoclaved Aerated Concrete (AAC) Market is Poised to Exhibit A Moderate 4.3% CAGR through 2017 to 2026 here
News-ID: 1172184 • Views: 131
More Releases from Fact.MR
Mini LED Market to Expand 7.5X by 2030, Finds New Study by Fact.MR
In recent years, increasing popularity of OLED TVs in China and India has been significantly influencing growth of the mini LED market. With an increase in disposable income of a majority of the population in these countries, the inclination towards smart screens with higher lifespan and better performance is expected to open up numerous growth opportunities for the mini LED market. Moreover, aspiring and affluent households have increased their spending
Uncertainty Surrounding COVID-19 to Shave-off Growth in Electrical Steel Market …
The global electrical steel market has utilized the opportunities in the market over the last decade with sales of electrical steel pegged at US$ 20.4 Bn in 2019. However, sales are set to plummet during in the middle two quarters of 2020 owing to COVID-19. In addition, several automakers have shuttered their production units, causing incalculable loss to the electrical steel market in 2020. However, the demand of electrical steel
Medical Device Contract Manufacturing Market Set for Strong Growth, Production F …
The medical device contract manufacturing market is poised to expand at a CAGR of 11.3% during the forecast period (2020-2026). This is attributed to rapidly evolving healthcare industry and increasing adoption of technologically advanced surgical procedures. A number of original equipment manufacturers (OEMs) and contract manufacturers have been focusing on advanced technologies such as robotics, 3D-printing, and minimally invasive surgeries. Mergers & acquisition activities among leading players have greatly accelerated
Fluid Management Market Expected to Grow Amid Covid-19, Finds Fact.MR
Growing prevalence of chronic disease and an expansion in numbers of geriatric population is leading to an upward facing growth curve for global fluid management market over the period of 2020 to 2025, states Fact.MR. It projects a compound annual growth rate or CAGR of about 5.3% for the market over this period, helping the market push its worth up significantly. It is significant to note here that while number of
More Releases for AAC
Small Caliber Ammunition(AAC) Market Size, Share, Development by 2024
Global Info Research offers a latest published report on Small Caliber Ammunition(AAC) Market Analysis and Forecast 2019-2025 delivering key insights and providing a competitive advantage to clients through a detailed report. The report contains 102 pages which highly exhibit on current market analysis scenario, upcoming as well as future opportunities, revenue growth, pricing and profitability. Click to view the full report TOC, figure and tables: https://www.globalinforesearch.com/global-small-caliber-ammunition-market_p107841.html(BNNT)-market_p107663.html Small caliber ammunition is .50 caliber and
Autoclaved Aerated Concrete (AAC) Market Size, Share, Development by 2024
Global Info Research offers a latest published report on Autoclaved Aerated Concrete (AAC) Market Analysis and Forecast 2019-2025 delivering key insights and providing a competitive advantage to clients through a detailed report. The report contains 102 pages which highly exhibit on current market analysis scenario, upcoming as well as future opportunities, revenue growth, pricing and profitability. Click to view the full report TOC, figure and tables: https://www.globalinforesearch.com/global-autoclaved-aerated-concrete-aac-market_p107838.html(BNNT)-market_p107663.html AAC is a highly thermally insulating
AAC Block Market Forecasts – ACICO, Aercon, Avantha Group, Bauroc Internationa …
MarketStudyReport.com Add New Global AAC Block Market by Manufacturers, Countries, Type and Application, Forecast to 2022 to its research database. The report presents a deep study of the market growth factors and drivers. The report spread across 118 pages with table and figures in it. The global market for AAC block will grow at a CAGR of 6.48% by 2022, according to a new report published by Gen Consulting Company. The
Autoclaved Aerated Concrete (AAC) Market : Global Forecast over | 2024
The global autoclaved aerated concrete market has gained significant traction in regions such as Europe and Asia Pacific in the past few years. The unique combination of low weight, rigidity of construction, durability, cost-effectiveness, chemical inertness, lower energy cost of heating or cooling, and low negative impact of environment makes AAC a viable construction material. The material has started gaining popularity as a sustainable green building material and is expected
Bioadhesive Market Autoclaved Aerated Concrete (AAC) Market Research Report
Latest industry research report on: Global Bioadhesive Market : Industry Size, Share, Research, Reviews, Analysis, Strategies, Demand, Growth, Segmentation, Parameters, Forecasts Global Bioadhesive Market: Overview Bioadhesive is an adhesive that is derived from natural sources such as plant and animal. It is a substitute for synthetic and epoxy adhesive that are derived from petroleum. Bioadhesives are primarily employed in end-user industries such as paper & packaging, construction and wood works & furniture.
Autoclaved Aerated Concrete (AAC) Market: Latest Trends,Analysis & Insights 2024
The autoclaved aerated concrete market in Europe and Asia Pacific is highly competitive owing to the presence of a large number of AAC manufacturers, observes a recent report by Transparency Market Research. On the other hand, the North America market features a low level of competition owing to the limited number of players due to subdued demand. Strong regional presence of companies such as Xella Group, H+H International, SOLBET, ACICO,