openPR Logo
Press release

Differential Pressure Sensor Rounds Up HVAC Portfolio

07-03-2018 03:37 PM CET | Industry, Real Estate & Construction

Press release from: E+E Elektronik Ges.m.b.H.

EE600 differential pressure sensor for HVAC and building automation.

EE600 differential pressure sensor for HVAC and building automation.

The EE600 differential pressure sensor extends the product portfolio for HVAC and building automation of the Austrian sensor manufacturer E+E Elektronik. The transmitter is available with full scale 1,000 Pa (4 inch water column) and 10,000 Pa (40 inch WC) with each four selectable measurement ranges. The piezo-resistive pressure sensing element ensures highly accurate and long-term stable measurements. The innovative enclosure facilitates mounting and minimizes installation costs. An optional graphic display shows the actual measured data.

The EE600 is dedicated for the measurement of differential air pressure in ventilation and air conditioning systems or for filter monitoring. Additionally, it can be employed for all non-flammable and non-aggressive gases.

Multi-Range, Fully Configurable
Four measuring ranges (0...250 / 500 / 750 / 1000 Pa or 0...2500 / 5000 / 7500 / 10000 Pa) can be selected via DIP-switches on the electronics board. This makes the EE600 particularly versatile. The output signal and the response time can also be set directly on the board. With push buttons, the user can easily perform a zero and span point adjustment.

Large Graphic Display
The EE600 offers voltage and current output signals, both simultaneously available at the spring terminals. The device can be fitted with a large graphic display. The display backlight and the pressure unit (Pa, mbar, inch WC, kPa) can also be set via DIP-switches on the electronics board.

Installation-Friendly Enclosure
Same as all other HVAC measuring instruments from E+E Elektronik, the EE600 features a robust IP65 / NEMA 4 enclosure, which facilitates fast and easy installation. Due to external mounting holes, it can be mounted with closed cover. This saves time and minimizes installation costs. In addition, the electronics is protected against construction site pollution during installation. For US requirements the enclosure provides a knockout for a 1/2" conduit fitting.

One Stop Solution for HVAC
The EE600 pressure sensor rounds up the existing E+E offer for humidity, temperature, CO2 and air velocity. E+E Elektronik is thus a single source of measuring devices for all HVAC-relevant measurands.

E+E Elektronik develops and manufactures sensors and transmitters for humidity, temperature, dewpoint, moisture in oil, air velocity, flow and CO2. Data loggers, hand-held measuring devices and calibration systems complete the comprehensive product portfolio of the Austrian sensor specialist. The main applications for E+E products lie in HVAC, building automation, industrial process control and the automotive industry. A certified quality management system according to ISO 9001 and ISO/TS 16949 ensures the highest quality standards. E+E Elektronik has a worldwide dealership network and representative offices in Germany, France, Italy, Korea, China and the United States. The accredited E+E calibration laboratory (OEKD) has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national standards for humidity and air velocity.

E+E Elektronik Ges.m.b.H
Langwiesen 7
4209 Engerwitzdorf
Austria
T: +43 (0) 7235 605-0
F: +43 (0) 7235 605-8
info@epluse.at
www.epluse.com

Press contact:
Mr. Johannes Fraundorfer
pr@epluse.at

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Differential Pressure Sensor Rounds Up HVAC Portfolio here

News-ID: 1108089 • Views:

More Releases from E+E Elektronik Ges.m.b.H.

Miniature Sensor Module Measures CO2, Temperature and Pressure
Miniature Sensor Module Measures CO2, Temperature and Pressure
The new EE895 sensor module from E+E Elektronik measures CO2, temperature and ambient pressure. The small 3-in-1 module is an ideal choice for measuring instruments used for ventilation and climate control, in building automation or for process control. Due to its low power consumption, the module is also suitable for battery-operated devices such as hand-held meters, data loggers or wireless transmitters. The temperature and pressure compensation ensures high CO2 measurement
Humidity and Temperature Probe with Digital Interface
Humidity and Temperature Probe with Digital Interface
The EE072 by E+E Elektronik is a highly accurate humidity and temperature probe for demanding process and climate control tasks. The probe can be used for example in agriculture and livestock farming, the food and pharmaceutical industries or in clean rooms. The digital interface with the Modbus RTU or CANopen communication protocol facilitates the design-in of the EE072. Versatile in Use and Highly Accurate A wide temperature range of -40 to 80
4 in 1 Probe Measures CO2, Humidity, Temperature and Pressure
4 in 1 Probe Measures CO2, Humidity, Temperature and Pressure
The EE872 from E+E Elektronik measures the CO2 concentration up to 5 % (50 000 ppm) as well as relative humidity, temperature and ambient pressure. Additionally, the 4 in 1 probe also calculates the dew point temperature. It is perfectly suited for use in harsh and aggressive environment, such as agricultural applications. The active pressure and temperature compensation ensures a very high CO2 measuring accuracy. A heated probe version is
New CO2 Sensor for Railway Applications
New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control. Long-Term Stable CO2 Measurement The E+E NDIR dual wavelength infrared measuring principle is particularly

All 5 Releases