openPR Logo
Press release

Stauff expands weld fittings range

05-16-2018 10:03 AM CET | Industry, Real Estate & Construction

Press release from: Walter Stauffenberg GmbH & Co. KG

The new model series with straight weld fitting for pipes, type FI-ASV

The new model series with straight weld fitting for pipes, type FI-ASV

New model series for demanding applications, e.g. in power plants

With the series FI-SNR and FI-ASV, Stauff expands the product range of Stauff Connect weld fittings. This connection technology is being replaced increasingly by easy-to-install forming systems, e.g. Stauff Form, in various applications. But it will still retain its place in the market in the future, especially in the demanding heavy industry and in power plant engineering.

As a full-range provider in the premium segment, Stauff is therefore developing this product range further: Two more model series are now available. The first one, with the designation FI-SNR, consists of 24° weld fittings with cone and O-ring. These allow users to adapt tubes through welding with a standard fitting body with a standard 24° inner cone, whereby the nominal size of the tube to be connected is smaller than that of the fitting body – therefore the reduction. This model series is available in the sizes 8/6L (Light Series) up to 30/25S (Heavy Series).

The second series, FI-ASV, is a straight weld fitting for tubes. It is supplied as a set consisting of weld cone, fitting body for welding and a conventional cap nut. This fitting connects two tubes with the same outer diameters, whereby welding is required at both ends. These fittings are available from the Heavy Series in the sizes 10S to 38S.

Just like the FI-SNR series, the fittings from the FI-ASV series are also supplied with phosphate coating, as this surface coating allows the components to be welded without any health risks. All other components (fitting bodies, cap nuts), however, feature the high-quality zinc/nickel coating which is standard for the Stauff Connect range.

With these two new model series, Stauff expands the standard catalogue range of weld fittings in the extensive Stauff Connect range, which previously already featured four different versions: straight bulkhead weld fittings, straight weld fittings, angled weld fittings and 24° weld cones with O-ring. Now, users can choose from six model series.

About the STAUFF Group
For more than 50 years, the companies of STAUFF Group, since April 2015 also including VOSWINKEL, have been developing, manufacturing and distributing pipework equipment and hydraulic components for mechanical and plant engineering and for service and industrial maintenance.
The overall range currently includes about 40000 standard components in ten product groups as well as a large number of special and system solutions, which are manufactured to customer specifications or based on in-house developments.
Wholly owned manufacturing, sales and service facilities in 18 countries and a tight global network of authorised distribution partners ensure high presence and service paired with a maximum of availability.
With around 1400 employees worldwide, including 560 in Germany, the companies of STAUFF Group achieved external sales of over EUR 236 million in the business year 2017.

Press Contact
Walter Stauffenberg GmbH & Co. KG
Mr Boris Mette
Im Ehrenfeld 4
58791 Werdohl
Phone: +49 (0) 2392 / 916-154
Telefax: +49 (0) 2392 / 916-270154
eMail: b.mette@stauff.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Stauff expands weld fittings range here

News-ID: 1050907 • Views: 585

More Releases from Walter Stauffenberg GmbH & Co. KG

Stauff expands manufacturing capacities at Werdohl
Investment in high-capacity rotary transfer machines At its main base in Werdohl, Stauff has placed into service a rotary transfer machine for tube connectors with which some 1.5 million angle, T-connector and cross-pieces can be made from forging blanks. In this way, the all-in supplier of hydraulic lines has reacted to the considerable demand for its own “Stauff Connect” tube connector range which came onto the market in 2015. A second rotary
Customised service cases
Individually designed and equipped hydraulic test cases for maintenance and service The hydraulic test cases from Stauff have been a popular item with maintenance and service personnel for many years. In addition to analogue and digital pressure gauges, they can also be equipped with test couplings and hoses, connection adapters and other accessories. Numerous standard versions can be ordered directly from stock. Due to the growing demand of the market for customised
Stauff and Voswinkel combine logistics and sales
Substantial procurement benefits for customers of both companies Stauff Group and Voswinkel GmbH combine logistics and sales. As of 2 January 2018, Walter Stauffenberg GmbH & Co. KG delivers the products from both companies without transition period. The acquisition of Voswinkel GmbH, one of the leading manufacturers of quick release couplings, hose fittings and custom-designed tube assemblies, in April 2015 was a milestone for the Stauff Group on the way to
Time and cost savings in the assembly of tube, hose and cable clamps
Incredibly simple and quick: fastening Standard Series C-profile rails by stud welding In response to customer requirements from different sectors, the fluid specialists at the Werdohl-based Stauff Group have extended their stud welding system with a further application for the secure and permanent fixing of tube, hose and cable clamps to substructures: Standard C-profile rails from the company’s own TS range can now be fixed to systems using fibreglass-reinforced polyamide adapters

All 5 Releases


More Releases for Stauff

Stauff expands manufacturing capacities at Werdohl
Investment in high-capacity rotary transfer machines At its main base in Werdohl, Stauff has placed into service a rotary transfer machine for tube connectors with which some 1.5 million angle, T-connector and cross-pieces can be made from forging blanks. In this way, the all-in supplier of hydraulic lines has reacted to the considerable demand for its own “Stauff Connect” tube connector range which came onto the market in 2015. A second rotary
The new Stauff Catalogue App
Always at hand: Up-to-date and complete information on Stauff and Voswinkel products On more than 1,700 pages in total, the 10 individual Stauff product catalogues provide all information about the 40,000 standard articles of the company, that are considered to be relevant and of particular interest for design engineers as well technical purchasers of pipework components and hydraulic accessories when comparing and selecting products: Product characteristics and features, dimensions, material information,
Voswinkel becomes part of the Stauff Group
(Meinerzhagen / Werdohl, Germany) As mutually announced by both companies, the Stauff Group has successfully completed the acquisition of the Meinerzhagen, Germany based company Voswinkel from the Voswinkel shareholder family in April this year already. With corporate headquarters in Werdohl, Germany and two additional plants in Plettenberg-Ohle and Neuenrade-Küntrop, the Stauff Group develops, manufactures and distributes pipework equipment and hydraulic components for mechanical and plant construction as well as for
Updated Stauff One product catalogue available
Updated Stauff One product catalogue available Pipework components, test equipment and hydraulic accessories from a single source Beginning in February 2014, the new, revised and in some areas significantly expanded general product catalogue will be available from Stauff, the Werdohl, Germany based fluid technology specialist. On a total of 682 pages, the so-called Stauff One – initially released in spring 2011 – provides all relevant general, ordering and technical information about the company’s
STAUFF trainee achieves best grade
Florian Kircher, previously trainee for the position of cutting mechanic with the subject area of automatic lathe systems at the Werdohl production plant of Walter Stauffenberg GmbH & Co. KG, has been named one of the best graduates in his training class. At a celebratory ceremony on 16 October, Mr Kircher, who this year completed his vocational training before the testing committees of the South Westphalian Chamber of Industry and
Bring on the water: Stauff industrial filters
For the first time, the German fluid power specialist Stauff will be presenting an independently developed solution for the filtration of industrial water at the Hanover trade fair in April 2013. The SRFL-SW single filter housings have been designed to be used in the steel industry for pre-filtering or coarse filtering in descaling plants. The SRFL-SW series was developed and designed for direct installation into the pipelines of industrial water