openPR Logo
Press release

Plate Heat Exchanger Market Revenue, Opportunity, Segment and Key Trends 2017 – 2027

05-03-2018 01:31 PM CET | Advertising, Media Consulting, Marketing Research

Press release from: Future Market Insights

Plate Heat Exchanger Market Revenue, Opportunity, Segment

Plate heat exchanger generally uses metal plates to transfer heat between two fluids. It operates in same way as shell and tube heat exchanger, using a series of arranged plates instead of tubes. Plate heat exchanger can be of various type such as gasketed plate, brazed plate and welded plate. Among these, brazed plate heat exchanger is expected to witness significant market growth due to growing use in floor heating, refrigerant evaporators, condensers, oil coolers, etc.

Plate heat exchanger are used in various applications such as food & beverages, petroleum/ chemical processing, hydrocarbon processing, polymers, pharmaceutical, industrial, energy & power, HVAC and marine. Among these, plate heat exchanger are widely used in refrigerant or in food & beverages processing owing to its compact steel construction. Moreover, rising demand for effective thermal management in commercial and residential establishments is anticipated to drive HVAC demand over the forecast period.

Plate Heat Exchanger Market: Market Dynamics

Drivers

Energy infrastructure expansion along with growing demand from power generation segment is expected to be a factor which give traction to the growth of plate heat exchanger market over the forecast period. Low maintenance and operation cost is expected to be another factor which is expected to drive the growth of plate heat exchanger market over the forecast period. Additionally, plate heat exchanger are highly efficient and requires less space compare to others which further expected to upsurge the demand of plate heat exchanger market during the forecast period. That apart, the different advantages of plate heat exchanger such as easy to remove and clean, avoid cross contamination, asymmetrical flow gap available for the most costeffective solution and less fouling will also add to the growth of market.

Request Report Sample@ https://www.futuremarketinsights.com/reports/sample/rep-gb-5495

Restraint

High initial cost since titanium plates are expensive is expected to be a barrier that hinder the growth of plate heat exchanger market. Moreover, challenges such as finding leakage is difficult and pressure drop caused by plate cooler is higher are also expected to hamper the growth of plate heat exchanger market over the forecast period. Additionally, skilled labors are require for dismantling and assembling of plate which will further act as a restraining factor for the growth of plate heat exchanger market. Furthermore, increasing competition from new participants is also anticipated to be a factor restraining the growth of plate heat exchanger market in the upcoming future.

Plate Heat Exchanger Market: Segmentation

The global plate heat exchanger market can be segmented on the basis of product type and end user.

Based on product type, the global plate heat exchanger market can be segmented as:

Gasketed Plate
Brazed Plate
Welded Plate
Fully Welded Plate
Semi Welded Plate

Based on application, the global plate heat exchanger market can be segmented as:

Process Heating
Batch Heating
Heat Recovery Interchangers

Based on end user, the global plate heat exchanger market can be segmented as:

Food & Beverages
Petroleum/ Chemical Processing
Hydrocarbon Processing
Polymers
Pharmaceutical
Industrial
Energy & Power
HVAC – Heating/ Air Conditioning
Marine

Visit For TOC@ https://www.futuremarketinsights.com/toc/rep-gb-5495

Plate Heat Exchanger Market: Region-Wise Outlook

During the forecast period, North America will be closely followed by Europe in terms of anticipated growth. Both these market are expected to witness rich growth in the plate heat exchanger market, owing to high demand as well as production capacity. Asia Pacific in particular is expected to witness significant growth in the plate heat exchanger market, due to increasing demand from food & beverages, oil & gas and chemical industry. Japan and other ASEAN countries, anticipated to grow with a significant CAGR, due to increasing demand of plate heat exchanger from these countries. The Middle East and Africa region is projected to support growth of the plate heat exchanger market over the forecast period, due to expected rapid industrialization in upcoming years.

Plate Heat Exchanger Market: Market Participants

Examples of some of the market participants identified across the value chain of the global plate heat exchanger market include:

WCR, Inc.
JC Equipments Pvt Ltd
Kelvion Holding GmbH
HRS Process Systems Ltd.
Tranter Inc.
REX Heat Exchanger
Industrial Heat Transfer, Inc.
Heat Exchanger USA
Kelvion Holdings GmbH
Mason Manufacturing LLC
UK Exchangers Ltd.
Guntner GmbH & Co. KG
Thermotec GmbH
HOLTOP
ALFA LAVAL AB
API Heat Transfer
SPX Corporation

About Us –

Future Market Insights (FMI) is a leading market intelligence and consulting firm. We deliver syndicated research reports, custom research reports and consulting services, which are personalized in nature. FMI delivers a complete packaged solution, which combines current market intelligence, statistical anecdotes, technology inputs, valuable growth insights, an aerial view of the competitive framework, and future market trends.

CONTACT:

616 Corporate Way, Suite 2-9018,
Valley Cottage, NY 10989,
United States
T: +1-347-918-3531
F: +1-845-579-5705
Email: sales@futuremarketinsights.com
Website: www.futuremarketinsights.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Plate Heat Exchanger Market Revenue, Opportunity, Segment and Key Trends 2017 – 2027 here

News-ID: 1038357 • Views: …

More Releases from Future Market Insights

Electronic Tongue Market will grow USD 774.2 million by 2035, at a 4.5% CAGR, fueled by demand for smart diagnostics and medical R&D.
Electronic Tongue Market will grow USD 774.2 million by 2035, at a 4.5% CAGR, fu …
The global electronic tongue market is advancing rapidly, poised to reach USD 497.9 million in 2025 and climb to USD 774.2 million by 2035, growing at a promising 4.5% CAGR. The increasing demand for precision diagnostics, pharmaceutical quality control, and personalized medicine is driving this technological surge, positioning the electronic tongue as a futuristic, non-invasive diagnostic instrument in healthcare and pharmaceuticals. Electronic tongues, by design, mimic human sensory functions through an…
ESD Tapes and Labels market will expand USD 4,253.3 million by 2035, growing at 4.5% CAGR with strong electronics and aerospace demand.
ESD Tapes and Labels market will expand USD 4,253.3 million by 2035, growing at …
The global market for ESD (electrostatic discharge) tapes and labels is entering a new decade of expansion driven by technological innovation, the rise of miniaturized electronics, and heightened quality standards in manufacturing. Valued at USD 2,738.8 million in 2025, the market is expected to reach USD 4,253.3 million by 2035, expanding at a steady 4.5% CAGR. This reflects a world increasingly dependent on efficient anti-static solutions that ensure the protection…
Catalase Market will rise USD 575.9 million by 2035 at 3.1% CAGR, driven by sustainable innovations and expanding applications.
Catalase Market will rise USD 575.9 million by 2035 at 3.1% CAGR, driven by sust …
The global market for catalase is preparing for steady long-term expansion, driven by green chemistry, renewable sourcing, and biotechnology-driven production upgrades. Projected to reach USD 424.5 million in 2025 and USD 575.9 million by 2035, the industry's 3.1% CAGR reflects its broadening influence across critical sectors including food and beverages, pharmaceuticals, textiles, and personal care. With growing concerns about sustainability, efficiency, and safety, catalase is emerging as a vital biocatalyst…
Quillaia Extract market is set to reach USD 1,826.9M by 2035 at 5.8% CAGR fueled by natural, functional, and sustainable trends.
Quillaia Extract market is set to reach USD 1,826.9M by 2035 at 5.8% CAGR fueled …
The global Quillaia extract market is entering a period of unprecedented growth, reflecting the world's shift toward natural, functional, and nutrient-rich ingredients. Projected to increase from USD 1,039.6 million in 2025 to USD 1,826.9 million by 2035 at a robust 5.8% CAGR, the industry's future is shaped by consumer demand for healthier, eco-friendly products and manufacturers' determination to stay ahead through innovation, expansion, and diversification. Over the past few years, Quillaia…

All 5 Releases


More Releases for Plate

Aquaculture Vaccines Market Protecting Our Oceans, Plate by Plate Safeguarding A …
Aquaculture Vaccines Market to reach over USD 877.67 million by the year 2030-Exclusive Report by InsightAce Analytic Market Synopsis- InsightAce Analytic Pvt. Ltd. announces the release of market assessment report on "Global Aquaculture Vaccines Market By Vaccine Type (Inactivated Vaccine, Attenuated Live Vaccine, DNA Vaccine and Others), Application (Bacterial Infection, Viral Infections, Combined Bacterial and Viral Infections and Others), Route Of Administration (Immersion Vaccines, Injection Vaccines and Oral Vaccines), Species (Salmon, Seabass…
5083 medium-thick aluminum plate 5083 marine aluminum plate 5083 automotive alum …
5083 aluminum plate(https://www.mingtai-al.com/5083-Aluminum-Sheet.html) is a typical aluminum-magnesium alloy with light weight and high strength. With its excellent performance, it can be widely used in many industries such as automobile manufacturing, shipbuilding and rail transportation. With the vigorous development of lightweight, the demand for 5083 medium-thick aluminum plate in aluminum tank trucks and marine aluminum plates has increased. 5083 medium-thick aluminum plate-5083 marine aluminum plate-5083 automotive aluminum plate manufacturer introduction In recent years,…
The difference between two plate mould and three plate mould
Injection molding [https://www.dtgplasticmolding.com/popular-design-for-china-custom-cheap-plastic-injection-molding-service-for-auto-parts-product/] is a widely used manufacturing process for producing plastic parts in large volumes. It involves the use of injection molds, which are essential tools for shaping and forming plastic materials into the desired shapes. There are different types of injection moulds, including two plate mould and three plate mould, each with its own unique features and advantages. Two plate mould and three plate mould are the two main…
Charge Plate Monitor Market 2023
This comprehensive report thoroughly assesses various regions, estimating the volume of the global Charge Plate Monitor market within each region during the projected timeframe. The report is meticulously crafted and includes valuable information on the current market status, historical data, and projected outlook. Furthermore, it presents a detailed market analysis, segmenting it based on regions, types, and applications. The report closely monitors key trends that play a crucial role in…
Paraguay introduces MERCOSUR license plate
Delmenhorst, February 2020. In order to accelerate economic and political development processes, Latin American states joined together at the end of the 20th century to form the Mercado Comun del Sur, or MERCOSUR (Common Market of the South). These currently include Argentina, Brazil, Paraguay and Uruguay, as well as associated countries such as Chile and Peru. In order for the Community to have an impact on vehicles as well, the…
Turbocharger for plate processing
When atoms are supplied with additional energy via collisions or light, they release the excess. This is called ‘light amplification by stimulated emission of radiation’, in short: LASER. Plate processors are interested in speed and flexibility. Complex contours; clean, precise cutting edges; and low changeover times and costs. Thanks to automated loading and unloading, the latest laser systems speed up production. Solvaro GmbH, the manufacturer of metal components based in…