openPR Logo
Press release

Automotive Cam Position Sensors Market: Recent Industry Developments and Growth Strategies Adopted by Players

04-11-2018 09:19 AM CET | Advertising, Media Consulting, Marketing Research

Press release from: Transparency Market Research

/ PR Agency: Transparency Market Research
Automotive Cam Position Sensors Market: Recent Industry

An automotive cam position sensor determines which cylinder is firing to establish injector synchronization and coil firing sequence in a distributor-less ignition system. The camshaft position sensor is located in the cylinder head of the engine and has a cylindrical portion that inserts into the head. The cam position sensor monitors the position of the camshaft and reports data to the engine control unit. The engine control unit gathers inputs from sensors and other devices to keep the engine running.

The fuel injectors use the data from the cam position sensor to know when to fire. Cam position sensors operate on pulse detection and counting. The fundamental components of these sensors include a toothed disc mounted on the shaft, a stationary detector, and an electronic circuit. The disc has teeth or marks distributed evenly around its circumference. When the shaft spins, the teeth or marks pass by the stationary detector and generate a series of electrical pulses.

The camshaft position sensor provides valuable information regarding the camshaft position to the computer management system. The computer management system utilizes the information from the position sensor to determine when to inject more fuel. Fuel is likely to be injected incorrectly if the computer management system does not receive correct inputs from the sensor, and the vehicle is likely to stall.

Request PDF Sample@ https://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=38150

The sensor eliminates the requirement for a distributor system, which has disadvantages such as wear and low efficiency, which are eliminated by cam position sensors. This resulted in the higher efficiency of the engine. These advantages are driving the automotive cam position sensor market. Increasing demand for vehicles in developing countries has created numerous opportunities for the automotive cam position sensor market.

Cam sensors are often exposed to extreme heat and can burn off, this is expected to restrain the automotive cam position sensor market. A faulty camshaft sensor can result in an uneven idle, misfire, and poor acceleration. It can even prevent the engine from starting.

The automotive cam position sensor market can be segmented based on technology, location of mounting, input power, and geography. In terms of technology, the automotive cam position sensor system market can be segmented into magnetic pick-up coils, Hall-effect sensors, magneto-resistive element (MRE) sensors, and optical sensors. The first three utilize the metal teeth of the wheel to generate a series of electric pulses when the teeth come into the proximity of the sensor.

Get ToC of This Report @ https://www.transparencymarketresearch.com/sample/sample.php?flag=T&rep_id=38150

Optical position sensors employ a light-emitting diode light source and a photodiode to detect optical marks on the shaft or slots in a disk as they move past the detector. Optical sensors have good accuracy and are suitable for both high-speed and low-speed applications.

Based on location of mounting, the automotive cam position sensor market can be segregated into mounted on timing cover over the camshaft gear, on the end of the cylinder head (in case of overhead cam application), and mounted in a special housing. Depending up on the mountings of the other engine components such as position of cam and rocker arm, the mounting location of the camshaft position sensor varies.

In terms of input power, the automotive cam position sensor market can be divided into passive cam position sensor and active position sensor. An active position sensor requires an external source of power. A passive cam sensor detects and responds to some type of input from the physical environment. This input may consist of infrared, temperature, force, and light.

View this Report@ https://www.transparencymarketresearch.com/automotive-cam-position-sensors-market.html

Based on geography, the automotive cam position sensor market can be segmented into North America, Asia Pacific, Europe, Middle East & Africa, and the Rest of the World. The automotive market in Asia Pacific is a prominent market for automotive. The demand for automotive cam position sensors. Demand for automotive cam position sensors increasing in parallel with demand for automotive.

Cam position sensors play a vital role to help meet the increasing demand for highly efficient automotive engines.

Prominent manufacturers of automotive cam position sensors emphasize on increasing its efficiency. Key players operating in the automotive cam position sensor market are Robert Bosch GmbH, Continental AG, DENSO CORPORATION, Delphi Automotive LLP, Valeo, ZF Friedrichshafen AG, Hitachi Ltd., CARDONE Industries, Wells Vehicle Electronics, and Walker Products Inc.

About Us

Transparency Market Research (TMR) is a global market intelligence company providing business information reports and services. The company’s exclusive blend of quantitative forecasting and trend analysis provides forward-looking insight for thousands of decision makers. TMR’s experienced team of analysts, researchers, and consultants use proprietary data sources and various tools and techniques to gather and analyze information.

TMR’s data repository is continuously updated and revised by a team of research experts so that it always reflects the latest trends and information. With extensive research and analysis capabilities, Transparency Market Research employs rigorous primary and secondary research techniques to develop distinctive data sets and research material for business reports.

Contact

Transparency Market Research
State Tower,
90 State Street,
Suite 700,
Albany NY - 12207
United States

Tel: +1-518-618-1030
USA - Canada Toll Free: 866-552-3453
Email: sales@transparencymarketresearch.com
Website: http://www.transparencymarketresearch.com
Research Blog: http://www.techyounme.com/

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Automotive Cam Position Sensors Market: Recent Industry Developments and Growth Strategies Adopted by Players here

News-ID: 1011024 • Views: 109

More Releases from Transparency Market Research

Dielectric Gases Market Shares, Strategies and Opportunities 2027
Overview TMR’s report on the Dielectric Gases Market is an all-important tool for market stakeholders in their pursuit to discover avenues for innovation, and further undertake strategic planning for the launch of products and services. Our research report on the Dielectric Gases market serves as a valuable guide for market stakeholders. The report deep dives into demand drivers, challenges, and opportunities that are likely to influence the Dielectric Gases market over the
Oxalic Acid Market Size will Observe Lucrative Surge by the End 2027
Overview TMR’s report on the Oxalic Acid Market is an all-important tool for market stakeholders in their pursuit to discover avenues for innovation, and further undertake strategic planning for the launch of products and services. Our research report on the Oxalic Acid market serves as a valuable guide for market stakeholders. The report deep dives into demand drivers, challenges, and opportunities that are likely to influence the Oxalic Acid market over the
Long Fiber Thermoplastics Market Shares, Strategies and Opportunities 2027
Overview TMR’s report on the Long Fiber Thermoplastics Market is an all-important tool for market stakeholders in their pursuit to discover avenues for innovation, and further undertake strategic planning for the launch of products and services. Our research report on the Long Fiber Thermoplastics market serves as a valuable guide for market stakeholders. The report deep dives into demand drivers, challenges, and opportunities that are likely to influence the Long Fiber Thermoplastics
High Performance Foaming Agents Market Size will Observe Lucrative Surge by the …
Overview TMR’s report on the High Performance Foaming Agents Market is an all-important tool for market stakeholders in their pursuit to discover avenues for innovation, and further undertake strategic planning for the launch of products and services. Our research report on the High Performance Foaming Agents market serves as a valuable guide for market stakeholders. The report deep dives into demand drivers, challenges, and opportunities that are likely to influence the High

All 5 Releases


More Releases for Cam

Cam Locks Market Report 2018: Segmentation by Type (Electronic Cam Locks, Magnet …
Global Cam Locks market research report provides company profile for WANGTONG LOCKS, DIRAK, Litai Metal Products, Capitol Lock, Rittal, ASSA ABLOY, Master Lock (Fortune Brands), Southco, Allegion, The Eastern Company and Others. This market study includes data about consumer perspective, comprehensive analysis, statistics, market share, company performances (Stocks), historical analysis 2012 to 2017, market forecast 2018 to 2025 in terms of volume, revenue, YOY growth rate, and CAGR for the
Forecast of Cam Follower Industry, By 2021
Latest Report Added by ‘ProfResearchReport’ on “Cam Follower Industry” with Deep Research, Analysis, Reviews, Trends & Forecast by 2021. The Global and Chinese Cam Follower Industry, 2011-2021 Market Research Report is a professional and in-depth study on the current state of the global Cam Follower industry with a focus on the Chinese market. The report provides key statistics on the market status of the Cam Follower manufacturers and is a valuable
.CAM extension is now available for brands!
Rotterdam, October 20th 2016 .CAM’s Trademark Sunrise Period began on October 6th and ends on December 5th.  During this period trademark holders who have registered their marks with the Trademark Clearinghouse (TMCH) have the opportunity to register their "trademark.cam" names before the new domain extension is offered to the general public. .CAM works well for everything that has something to do with imagery. Think about manufacturers and providers of video devices. It
Sherwoods Introduce New Bushnell Trophy Cam
Warwickshire, United Kingdom (17 June, 2011) – Sherwoods Photographic Limited, the UK’s leading premier specialist in telescopes and binoculars, introduce the new Bushnell Trophy Cam 720P HD. The new Bushnell Trophy Cam model is an innovative new digital surveillance camera incorporating a host of ground-breaking design features. The camera has a 1-second trigger speed, the option for audio recording whilst in video mode, and the ability to record more images and
Un-Expectable Spy Cam Recorders
The New revolution in the scientific world is the spy cam recorders. People are now aware of these portable and small spy cameras installed in pens, watches, desk clocks etc. But not many people know that now, such spy cameras are also fixed in lighters, baseball caps, car keys, coca cola can, in ID cards, in mp3 players etc. Moreover, motion detecting spy cam recorders are also available. All these
Trail Cam Pro Expands Product Offering With New Bushnell Trophy Cam Digital Trai …
SPRINGFIELD, MO -- Online digital trail camera superstore, Trail Cam Pro, recently announced that it has added a new Bushnell Trophy Cam digital camera to its expansive offering of high quality trail cameras and accessories. Comparable to a Scoutguard scouting camera, the new five mega pixel Bushnell Trophy Cam digital camera offers an array of advanced technological features, including 24 night vision LEDs. Those interested can read more about