openPR Logo
Press release

Cerasorb® M used successfully during acetabular cup replacement

05-19-2009 05:55 PM CET | Health & Medicine

Press release from: curasan AG

curasan AG presented innovative medical products from the Cerasorb® umbrella brand at the 57th annual congress of the Association of South-German Orthopaedic Surgeons (Vereinigung Süddeutscher Orthopäden e. V.) – Report on experiences with the use of Cerasorb® M during revision operations to correct acetabular cup loosening in the hip joint: use of Cerasorb® M for filling of defects successful in 30 older patients – Low risk of infection documented

Kleinostheim, Germany, May 18th, 2009 – curasan AG presented its innovative medical products for regenerative orthopaedics (orthobiologics) under the umbrella brand Cerasorb® at the trade show held in conjunction with the 57th annual congress of the Association of South-German Orthopaedic Surgeons in Baden-Baden. Interest was primarily focused on the bone substitute material Cerasorb® M with its successful use in acetabular cup revisions being highlighted in one of the lectures: Dr. S. Berger, a member of the working group headed by Prof. C. H. Siebert at the Orthopaedic Clinic, Annastift, Hanover, reported about the positive experiences relating to the use of the bone substitute material for the filling of defects during hip endoprostheses replacement procedures. Orthopaedic surgeons achieved good bone consolidation with Cerasorb® M in over 30 patients between the ages of 60 and 90 years.

“Because of the aging population, orthopaedic surgeons will be increasingly confronted with the problem of cup loosening in older patients”, explained Dr. Wolf-Dietrich Hübner, Director of the Medical Division at curasan AG, before adding: “This will inevitably lead to an increase in the number of revision procedures required.” Particularly in older women, bone stock instability frequently becomes apparent during operations. This has been the reason for the frequent use of bone cement to fill defects, which however makes further replacements very difficult. Many patients also do not have enough endogenous bone to fill large defects. This provided the impetus for Prof. C. H. Siebert and Dr. S. Berger to investigate the use of the Cerasorb® M bone substitute and construction material for this issue:

The orthopaedic surgeons used Cerasorb® M (ß-tricalcium phosphate) in over 30 operations – in 13 of these cases mixed with autogenous bone. The subsequent observation period was at least 2 years. In 27 cases, treatment results were satisfactory, even though four patients received replacement under septic conditions. “These results are clearly attributable in large measure to Cerasorb® M's phase purity of over 99%”, stated Dr. Hübner, before continuing: “Furthermore, there is no potential for disease transmission with Cerasorb® M, in contrast to established products made from human or bovine bone material.”

The use of Cerasorb® M for the filling of defects during hip endoprosthesis replacement procedures leads to outstanding bone consolidation. The newly formed autogenous bone also creates a good basis for any potential subsequent procedures that may be necessary. With older patients, Cerasorb® M can be used either alone or in combination with bone. Regardless of the patients’ age, Cerasorb® M has been demonstrated to be a good alternative to classic bone cement for the filling of defects during endoprostheses revisions.

Featuring over 400 lectures, workshops and seminars, the 57th annual congress of the Association of South-German Orthopaedic Surgeons e.V. was a high-class, interdisciplinary information forum for orthopaedic surgeons. The annual event also featured a trade show with over 160 industry exhibitors, including curasan AG.

Background information about curasan AG:
curasan AG is publicly traded (ISIN: DE 000 549 453 8) and is one of the leading firms in the field of bone and tissue regeneration. In addition to the synthetic Cerasorb® bone regeneration material, the company has developed a future-oriented product pipeline. The goal during the next few years is to bring further medical products to market readiness and to market them via well-positioned contractual partners in various submarkets.

Press Contact:
curasan AG
Lindigstraße 4
63801 Kleinostheim
Andrea Weidner
Tel. +49 (0)6027 40 900-51
Fax +49 (0)6027 40 900-39
andrea.weidner@curasan.de
www.curasan.de

fr financial relations gmbh
Jörn Gleisner
Tel. +49 (0)69 95 90 83 20
Fax +49 (0)69 95 90 83 99
j.gleisner@finanical-relations.de

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Cerasorb® M used successfully during acetabular cup replacement here

News-ID: 80231 • Views:

More Releases from curasan AG

curasan AG: Dental Business Unit acquired as of June 1
Kleinostheim, Germany, June 6, 2013 – curasan AG, Germany, has acquired a large part of the “Oral Regenerative Medicine” division of Riemser Pharma GmbH, Germany, effective June 1, 2013. curasan AG now owns the marketing and distribution rights for the products covered by the contract and is assuming the sales structures, including the na-tional and international customer base. As a result of this change, curasan has immediate access to the dental market
curasan AG now sells bone regeneration material in injectable form
curasan AG now sells bone regeneration material in injectable form
Kleinostheim, 05.12.2012 – curasan AG, listed on the General Standard (ISIN: DE 000 549 453 8), has introduced its new bone regeneration material CERASORB® Ortho Paste to the German and European markets at the beginning of December. CERASORB® Ortho Paste is comprised of fine granules of the proven, fully resorbable, synthetic material CERASORB® M Ortho suspended in a hyaluronic acid hydrogel-matrix. The paste-like product has the advantage that it is
curasan AG commences operations in the European market with the appointment of a …
Kleinostheim, 15.02.2012 – curasan AG, listed in the General Standard (ISIN: DE 000 549 453 8), created a new post on 1st February 2012 in relation to the active expansion of its European sales network in the fields of Orthopaedics and trauma surgery. Mr. Lee McCann BSc Business Administration (North West University of Applied Science, London, U.K.), will be operating as the organisation’s International Sales Director for Orthobiologics with immediate
curasan AG: Novel bone regeneration material approved for sale in Europe
Kleinostheim, Germany – curasan AG, which is listed in the General Standard of the German Stock Exchange (ISIN: DE 000 549 453 8), has received European approval for a novel synthetic bone regeneration material. Osseolive® is a bioactive, poly-crystalline calcium-alkali-phosphate ceramic, which has a stimulating effect on bone formation as well as on bone mineralisation. “With Osseolive® emerging from our well-stocked development pipeline, we now have an ideal extension to our tricalcium-phosphate

All 5 Releases


More Releases for Cerasorb®

Ultimate Chemicals® Featured in Manufacturing Marvels® on The Fox Business Net …
MOORE, OK., Oct. 8, 2021/ -- Ultimate Chemicals® Inc., an integrated manufacturer and supplier of chemicals and related services, is pleased to announce it will be showcased in a broadcast of Manufacturing Marvels® scheduled to air on October 14, 2021 at approximately 9:30-9:44 p.m. EST on The Fox Business Network® (FBN). Ultimate Chemicals has created their products to help restore surfaces to their optimum surface capability. Non-destructive to the surfaces to
Sunera Technologies, Inc Joins SAP® PartnerEdge® Delivering SAP® S/4HANA
Sunera Technologies, Inc Joins SAP® PartnerEdge® Delivering SAP® S/4HANA and Intelligent Enterprise to Manufacturing, Consumer Products, Higher education, and research, Industrial machinery and components, Life sciences and Automotive Industries Chicago, IL, June 10, 2020 – Sunera Technologies, Inc announced that it had joined the SAP® PartnerEdge® program as a Re-sell & Services partner, through which it will resell SAP solutions to midsize organizations in North America. Through this engagement, SuneraTech
curasan AG receives approval for Cerasorb® M ORTHO in Canada
Kleinostheim, Germany – curasan AG, listed in the General Standard (ISIN: DE 000 549 453 8) has received the certification for the synthetic bone regeneration material Cerasorb® M ORTHO from the Canadian authorities, Health Canada. “This news has come as a pleasant surprise”, stated Hans Dieter Rössler, CEO. “Since the approval process for medical devices by the Canadian authorities is highly demanding, we were actually expecting the certification some time
curasan AG: One million units of Cerasorb® produced
Kleinostheim, Germany, 28th April 2010 – The employees of curasan AG awaited the recently produced batch of Cerasorb® M with particular excitement – because amongst this batch was the one millionth bottle ready for sale. Depending on requirements, the bottles contain between 0.5 and 30 grams of the synthetic bone substitute material. The batch was part of a production order placed by Riemser Arzneimittel AG, which has been selling Cerasorb®
American Megatrends Announces AMIBIOS®8 & Aptio®4.x Support for the Intel® Xe …
ATLANTA, GEORGIA - American Megatrends (AMI) is pleased to announce that its AMIBIOS®8 & Aptio®4.x products feature support for the new Intel® Xeon® 5500 Platform. The Intel® Xeon® 5500 platform combines the Intel® Xeon® Processor 5500 Series with the Intel® 5520 Chipset for embedded, storage, security and communications infrastructure applications in a wide range of form factors. There are four different processor options for this platform with seven year lifecycle support
CNUX .NET Providers for DB2® Earns IBM® DB2® Data Server Certification
CNUX Technologies Inc. announced today that CNUX .NET Providers for DB2® - Standard and Web Service Edition have achieved "Ready for IBM DB2 Data Server Software" status. With this designation CNUX customers can be assured that CNUX .NET Providers interacts and operates seamlessly with IBM® DB2® software. The "Ready for IBM DB2 Data Server Software" program is a process designed for independent software vendors (ISVs) and solution integrators to validate their