openPR Logo
Press release

ICOP Technology introduces new panel PCs and HMIs based on latest DM&P Vortex86 processors

12-15-2016 10:46 AM CET | IT, New Media & Software

Press release from: ICOP TECHNOLOGY GmbH

/ PR Agency: SAMS Network
More processor configurations and I/O options now available

More processor configurations and I/O options now available

Taipei, Taiwan / Frankfurt, December 07, 2016 – ICOP Technology introduces new processor configurations and I/O options to extend its three DM&P Vortex86 processor-based HMI and panel PC series which feature screen sizes ranging from small 4.3” mobile phone displays to 15.0” standard touch panel sizes. All the new systems feature the latest x86 compatible DM&P Vortex86 processors that are long-term available and offer legacy support of PCI and ISA interfaces. Additionally, older Microsoft Windows versions such as Win CE, Win XP, Win 7 and Windows Embedded Standard as well as Linux are supported, thus enabling software which has been tested to run on these operating systems to be used long-term without any adaptation requirements to new operating systems. Applications for these new systems – that on top of legacy support also offer latest interface technologies – can be found anywhere where cost-efficiency and a high return on investment on the use of embedded x86 technologies is required. DM&P processors are designed to address the long tail of applications for x86 processor technologies, which makes them a perfect fit for both new and extremely cost-sensitive IoT-connected as well retrofit designs in performance classes where other x86 vendors have discontinued their support.

New 5.7” and 9” PDX3/PDX2/PEX HMIs
The primary target for ICOP Technology’s new HMI series of 5.7” and 9” touch screens are price-sensitive applications. Three processor options are available: The PDX3 offers the highest performance with a 1 GHz dual-core VortexDX3 processor, the PDX2 features the 933MHz DM&P Vortex86DX2 and the PEX is extremely cost-efficient with the 400MHz DM&P Vortex86EX processor. The new systems feature a low power consumption of less than 20 W, a rugged metal chassis in a compact design and offer an identical I/O range. This includes 1x fast Ethernet, 2x USB 2.0 ports, 1x serial port for RS-232/422/485, 1x audio, 1x PS/2 for a keyboard out as well as a CF card slot. Optionally, the systems can be equipped with a Micro SD slot or up to 2 GByte flash on board. Customers can choose between a +5 VDC or a wide range (+8 VDC to +35 VDC) power supply. The new systems fit for new low-power system designs as well as drop-in replacement for their predecessors, the PMX series, thanks to the same mechanical design and I/O features.

New 10.4” PPC-104T Panel PC
ICOP Technology has further upgraded its proven and versatile industrial-grade PPC series with metal housing for retail, industrial automation, digital signage and facility management applications with a more powerful dualcore processor. With the introduction of the popular 10.4” screen size, customers now have the choice of three different IP65 protected panels with screen sizes from 9.0“ to 10.4” and 15.0” in two different performance ranges with the 933MHz DM&P Vortex86DX2 or the 1GHz dualcore DM&P VortexDX3. Despite their increased performance, the new panel PCs impress by their very low power consumption of less than 24 W. A special highlight of the PPC series is the rear expansion I/O panel which allows customers requiring even more connectivity than the extensive interface set already offers to execute the individual I/O ports. Examples are dedicated interfaces for building automation or machine and motion control or digital and analog I/Os and further serial interfaces.

New PoE and RFID support for 4.3” HMI-043T open frame HMI
The very small, highly flexible and innovative HMI-043T panel-PC from ICOP Technology with 4.3” touch display and IP65 protected front panel has also been updated to now include optional RFID support and Power over Ethernet (PoE), which significantly reduces cabling efforts and costs. Featuring RFID support, it is ideal for applications such as access authorization in building automation as well as various vending, retail and logistics systems. Despite its compact dimension, the less than 8 W power consuming HMI-043T offers a highly customizable I/O design via the separate board layer for I/Os. The HMI-043T is available in a 116 x 94 x 34 mm metal enclosure as well as an open frame version which can be integrated into the customer’s own housing.

Further details on the new Box-PC series are available at:
http://www.icop.com.tw/en/category/Panel-PC/Panel-PC.html

ICOP Technology, a member of DM&P Group, was started in 1989 as an industrial controller design house and manufacturer. Influenced by the explosive growth of the industrial computer demand in early 1990, ICOP adopted x86 SoC (System-on-Chip) technology and built their reputation on offering solid embedded SBC (Single Board Computer) for the applications where small footprint, low power consumption, wide temperature range and product longevity are critical. With more than 25 years of experience, today ICOP offers an extensive range of standard SBCs, panel PCs, box PCs and robotic solutions, as well as individually developed and manufactured, customer-specific products as part of its ODM/OEM services. The company has manufacturing facilities in Taiwan and China and sales offices in major cities around the globe.

ICOP TECHNOLOGY GmbH
Beethovenplatz 1-3
60325 Frankfurt am Main
Germany
Tel: +49 (0) 69-2475-687-0
Fax: +49 (0) 69-2475-687-77
info@icoptech.eu
http://www.icoptech.eu

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release ICOP Technology introduces new panel PCs and HMIs based on latest DM&P Vortex86 processors here

News-ID: 395993 • Views:

More Releases from ICOP TECHNOLOGY GmbH

ICOP Technology introduces DM&P Vortex86 CPU based PC/104 SBC with EtherCAT support
ICOP Technology introduces DM&P Vortex86 CPU based PC/104 SBC with EtherCAT supp …
Taipei, Taiwan / Frankfurt, Germany, November 3, 2015 – ICOP Technology introduces a new rugged PC/104 Single Board Computer (SBC) with 1.0 GHz dual-core DM&P Vortex86 DX3 processor and EtherCAT support for ISA bus based industrial control technologies. The new ICOP Technology VDX3-6755 PC/104 SBC with 2GB DDR3 not only delivers full PC/104 compliance and native ISA bus support without bridges but also comprehensive support of the open EtherCAT standard
ICOP Technology introduces 933 MHz Panel PCs
ICOP Technology introduces 933 MHz Panel PCs
Taipei, Taiwan / Frankfurt, Germany, July 07, 2015 – ICOP Technology introduces with the industrial-grade PPC series a new 933 MHz Panel PC family developed to be deployed as lean, low-power HMIs (Human Machine Interfaces). The compact and fully x86 compatible, rugged Panel PC series in metal housing follows the trend towards client/server architectures with central processing clouds and slim, distributed control terminals as well as industrial-grade thin client installations.

More Releases for I/O

New NXprog Programmable I/O Module from Novus
We are pleased to announce the new DigiRail NXprog from Novus Automation. The NXprog unites the best of both worlds: the reliability and robustness of an industrial device for automation applications with the ease of programming from the Arduino community. It provides a rich mix of integrated analog and digital I/O signals, allowing DigiRail NXprog to be used as an extension of standard data logging, data acquisition, and automation systems,
New Novus DigiRail Connect Ethernet I/O Module
CAS Dataloggers is pleased to announce the new Novus DigiRail Connect, an intelligent, distributed I/O module that can be used to expand data logging and data acquisition systems. A built-in Ethernet port allows it to act as a Modbus TCP server to send data over the network. This versatile product features mixed analog and digital inputs and outputs, which accept a variety of standard sensor and signal types including thermocouples,
Digital I/O Cards Market 2018 Key Company Outlook - Panasonic, TE Connectivity, …
The digital I/O section is a range of PC-based data acquisition devices that allow a computer to interface with external digital signals. Higher voltages and isolation can also be provided from our range of digital data acquisition cards. The Digital I/O Cards Market report offers a detailed Outlook and future prospects of the Industry. The Digital I/O Cards market report includes various topics like market size & share, Competitive Analysis,
I/O Module Market Detailed Insights by Signal Types, BUS, I/O Module Type and Te …
Current Trends on I/O Module is announced by ReportsWeb and is available in its database. In this report, I/O Module market is segmented on the basis of application, type, end use and regions. In addition, the report presents detailed information regarding major revenue generating regions of I/O Module market. This report mainly introduces volume and value market share by players, by regions, by product type, by consumers and also their price
Global Input/Output (I/O) Modules Market 2017 Key Players - Panasonic, TE Connec …
I/O Module Market: WiseGuyReports.com adds “I/O Module Market 2017 Global Analysis, Growth, Trends and Opportunities Research Report Forecasting to 2022”reports to its database. Executive Summary This report studies I/O Module in Global market, especially in North America, China, Europe, Southeast Asia, Japan and India, with production, revenue, consumption, import and export in these regions, from 2012 to 2016, and forecast to 2022. This report focuses on top manufacturers in global market, with production, price,
Global I/O Connectors Market Research Report 2017
This report studies I/O Connectors in Global market, especially in North America, Europe, China, Japan, Southeast Asia and India, focuses on top manufacturers in global market, with capacity, production, price, revenue and market share for each manufacturer, covering Amphenol 3M Molex Cvilux Corporation HARTING TE Connectivity FCI Electronics AVX Corporation OMRON Control Technology TTI Request Sample Report: http://www.reportbazzar.com/request-sample/?pid=888332&ptitle=Global+I%2FO+Connectors+Market+Research+Report+2017&req=Sample Lairdtech WERNER WIRTH Halytech Meritec Moxa Japan Aviation Electronics Industry Royal DSM SilverStone PHOENIX CONTACT Market Segment by Regions, this report splits Global into several key Regions, with production, consumption, revenue, market share and growth