openPR Logo
Press release

Corelis Launches Runner-Lite: The Free JTAG Test Executive

09-15-2010 09:05 AM CET | IT, New Media & Software

Press release from: Corelis, Inc.

New Tool Offers Complete Structural and Functional Test Solutions for Reference Designs.

Cerritos, CA, September 13, 2010 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of Runner-Lite, a free software test executive for performing boundary-scan testing, JTAG Embedded Testing (JET), and in-system device programming using pre-generated test plan files built for specific reference boards.

Runner-Lite is designed to provide engineers visibility, awareness, and accessibility to board level JTAG and functional testing. The Runner-Lite test executive applies boundary-scan test patterns to a reference board, reads back the responses, and provides comprehensive fault detection and isolation of boundary-scan chain infrastructure, board interconnect, pull-up/pull-down resistors, and clusters such as memories and UARTs. The tool also performs automated and interactive functional tests on peripheral components connected to the on-board processor as well as In-System-Programming (ISP) of CPLDs, Flash memories, and serial EEPROM devices.

The software includes a powerful graphical fault identification subsystem to isolate and visualize the location of PCB faults. The subsystem displays a CAD-based photographic representation of a reference design on the host PC display to facilitate the rapid discovery of the actual location for any failure, even when the fault is hidden underneath devices. This feature grants engineers the ability to visually locate the fault diagnostic area using the virtual PCB representation.

“Runner-Lite offers a simple and streamlined interface for companies looking to evaluate the capabilities of combined JTAG and functional based testing,” states Ryan Jones, Senior Technical Marketing Engineer at Corelis. “Users can download the software and execute a full suite of boundary-scan and functional tests in a matter of minutes.”

Runner-Lite offers unrestricted access to complete off-the-shelf JTAG structural and functional test solutions for many popular silicon vendor reference designs. It allows users to familiarize themselves with Corelis test capabilities and even use the tool as a test bench for their own reference board based designs. The software is offered at no charge and can be downloaded from the Corelis website. Visit http://www.corelis.com/runner-lite for more information.

# # # #

Copyright © 2010 Corelis, Inc. All rights reserved.

All company and product names may be trade names, trademarks, or registered trademarks of the respective owners with which they are associated. Features, pricing, availability, and specifications are subject to change without notice.

About Corelis

Corelis, Inc., a subsidiary of Electronic Warfare Associates, Inc., offers bus analysis tools, embedded test tools, and the industry’s broadest line of JTAG/boundary-scan software and hardware products combining exceptional ease-of-use with advanced technical innovation and unmatched customer service. Corelis’ development and test tools are used by companies such as 2Wire, Agilent, BAE Systems, Bose, Broadcom, Cardinal Health, Dell, Ericsson, Fluke, GE, Hewlett-Packard, Intel, Jabil, Lockheed Martin, Microsoft, Motorola, Northrop Grumman, Qualcomm, Rockwell Collins, TI, ViaSat, Xilinx, and many others. Corelis products are found globally in every industry developing or manufacturing electronic products.

Corelis, Inc.
12607 Hiddencreek Way
Cerritos, CA 90703

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Corelis Launches Runner-Lite: The Free JTAG Test Executive here

News-ID: 144495 • Views:

More Releases from Corelis, Inc.

Corelis Introduces New Version 8.5 Boundary-Scan Tool Suite
New Software update includes Linear Technology PSM support, Continuous sample data logging, and new CPU support packages. Cerritos, California, October 3, 2017 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of version 8.5 of its ScanExpress™ Boundary-Scan Tool Suite. The new software update features support for continuous logging of sampled data to file in ScanExpress Debugger, multiple user interface enhancements for the
Corelis Introduces New Version 8.4 Boundary-Scan Tool Suite
New software update includes Cluster Wizard, Dynamic GPIO control, and new CPU support packages. Cerritos, California, December 16, 2016 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of version 8.4 of its ScanExpress™ Boundary-Scan Tool Suite. The new software update features a new ScanExpress TPG Cluster Wizard for logic cluster test creation, support for dynamic JTAG controller GPIO control in ScanExpress Debugger,
Corelis to Demonstrate Latest JTAG & Serial Bus Test Products at Aerospace Elect …
New Developments in JTAG/Boundary-Scan Test & Serial Bus Protocol Products on Display at Premier Aerospace Industry Event May 24-26, 2016 in Pasadena, California CERRITOS, Calif. – April 19, 2016 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, will exhibit its latest ScanExpress JTAG/Boundary-scan test software suite this May in booth 1032 at the Aerospace Electrical Systems Expo, co-located with the Space Tech Expo in Pasadena, California.

More Releases for Corelis

Corelis Introduces New Version 8.4 Boundary-Scan Tool Suite
New software update includes Cluster Wizard, Dynamic GPIO control, and new CPU support packages. Cerritos, California, December 16, 2016 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of version 8.4 of its ScanExpress™ Boundary-Scan Tool Suite. The new software update features a new ScanExpress TPG Cluster Wizard for logic cluster test creation, support for dynamic JTAG controller GPIO control in ScanExpress Debugger,
Corelis JTAG Tools Advance Manufacturing Test for Red Lion Controls
Complete ScanExpress JTAG/boundary-scan system reduces cost and improves production test time. Cerritos, CA, October 21, 2013 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced the successful deployment of Corelis ScanExpress tools at Red Lion Controls for testing Human Machine Interface (HMI) products. The combination of ScanExpress boundary-scan and JTAG Embedded Test (JET) tools enabled rapid development of fast, non-intrusive structural and early functional tests for
Corelis Adds JET Support for TI Sitara ARM Microprocessors
Non-intrusive functional test solution for high performance ARM microprocessors. Cerritos, CA, December 6, 2011 – Corelis, Inc., the leading supplier of high-performance JTAG test and measurement tools, announced today ScanExpress JET™ support for Texas Instruments Sitara™ ARM® Cortex™-A8 and ARM9™ microprocessors, specifically the AM37x, DM37x, and AM18x families. ScanExpress JTAG Embedded Test (JET) is a cutting edge test methodology providing at-speed testing of embedded processor-based electronic printed circuit boards and systems
Corelis Announces JTAG Embedded Testing for AMD Processors
Complete functional test solution for Athlon, Turion, and Opteron product families. Cerritos, CA, October 17, 2011 – Corelis, Inc., the leading supplier of high-performance JTAG test and measurement tools, announced today ScanExpress JET support for AMD embedded processors. Supported AMD processor families include Turion™ II Neo, Athlon™ II Neo, Opteron™ 4100, and Opteron™ Quad-Core (socket Fr5). These processors represent high-performance, low power processing for edge-of-enterprise markets including storage and telecommunications, as
Corelis Offers Integrated JTAG Solution with National Instruments
High Speed Digital I/O Platform Doubles as a JTAG Controller. Cerritos, CA, August 23, 2011 – Corelis, Inc. today announced support for National Instruments High Speed Digital I/O (HSDIO) instruments with Corelis’ ScanExpress suite of high-performance JTAG test and measurement tools. The marriage of National Instruments hardware with Corelis software provides a seamless path for deploying boundary-scan test and programming capabilities on existing PCI, PXI, and PXIe test platforms. Boundary-scan integration support
Corelis JET Amplifies QSC Audio Products Production Test
Corelis JTAG Embedded Test (JET) reduces test time, adds non-intrusive functional test. Cerritos, CA, May 9, 2011 – Corelis, Inc., a leading supplier of high-performance JTAG test and measurement tools, announced today the successful integration and deployment of the ScanExpress JTAG Embedded Test (JET) functional test system at the production facilities of QSC Audio Products, LLC in Costa Mesa, California. QSC, a leader and pioneer in professional audio products for over