openPR Logo
Press release

Corelis Releases Low Voltage JTAG Adapter for Intel Processors

08-05-2010 11:38 AM CET | IT, New Media & Software

Press release from: Corelis, Inc.

New Adapter Supports Intel XDP, XDP-Sinned, and ITP700Flex Connectors.

Cerritos, CA, August 4, 2010 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, has announced the availability of a new active Low Voltage Adapter for compatibility between Corelis’ boundary-scan controllers and low voltage JTAG designs operating below 2.5V. The Low Voltage Adapter is rated to support up to 100 MHz TCK speeds, employs ESD protection, and is capable of driving up to 90mA on its outputs.
The Low Voltage Adapter provides an electrical and mechanical interface to connect any Corelis 20-pin boundary-scan controller to a high density Intel XDP (eXtended Debug Port) connector. XDP is a 60-pin, small form factor connector designed to extend JTAG by permitting two separate clock domain scan-chains to be implemented. Dividing the system scan-chains into two domains allows increased operating frequencies of the processor scan-chain by moving slower chipset JTAG agents to a completely separate clock domain.

The XDP port runs at roughly 1.0V and has 51 ohm signal termination resistors, preventing traditional TTL-based JTAG controllers from interfacing to it. The Low Voltage Adapter overcomes this limitation by providing the appropriate level translation and current drive capability. Circuit boards having an Intel XDP connector can utilize the Low Voltage Adapter to access the scan chain with existing scan controllers.

“The Low Voltage Adapter fills a gap for new processor technologies that require a low voltage interface combined with low impedance termination. The adapter is capable of driving a 50 ohm resistor at one volt,” states David Muse, Hardware Products Manager at Corelis.

The Low Voltage Adapter is fully compatible with Corelis’ ScanExpress family of software products and comes complete with all necessary hardware and cabling. The adapter is available from stock with a list price of $1,500.

# # # #

Copyright © 2010 Corelis, Inc. All rights reserved.

All company and product names may be trade names, trademarks, or registered trademarks of the respective owners with which they are associated. Features, pricing, availability, and specifications are subject to change without notice.

About Corelis
Corelis, Inc., a subsidiary of Electronic Warfare Associates, Inc., offers bus analysis tools, embedded test tools, and the industry’s broadest line of JTAG/boundary-scan software and hardware products combining exceptional ease-of-use with advanced technical innovation and unmatched customer service. Corelis’ development and test tools are used by companies such as 2Wire, Agilent, BAE Systems, Bose, Broadcom, Cardinal Health, Dell, Ericsson, Fluke, GE, Hewlett-Packard, Intel, Jabil, Lockheed Martin, Microsoft, Motorola, Northrop Grumman, Qualcomm, Rockwell Collins, TI, ViaSat, Xilinx, and many others. Corelis products are found globally in every industry developing or manufacturing electronic products.

Corelis, Inc.
12607 Hiddencreek Way
Cerritos, CA 90703
www.corelis.com
562-926-6727

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Corelis Releases Low Voltage JTAG Adapter for Intel Processors here

News-ID: 140494 • Views:

More Releases from Corelis, Inc.

Corelis Introduces New Version 8.5 Boundary-Scan Tool Suite
New Software update includes Linear Technology PSM support, Continuous sample data logging, and new CPU support packages. Cerritos, California, October 3, 2017 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of version 8.5 of its ScanExpress™ Boundary-Scan Tool Suite. The new software update features support for continuous logging of sampled data to file in ScanExpress Debugger, multiple user interface enhancements for the
Corelis Introduces New Version 8.4 Boundary-Scan Tool Suite
New software update includes Cluster Wizard, Dynamic GPIO control, and new CPU support packages. Cerritos, California, December 16, 2016 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of version 8.4 of its ScanExpress™ Boundary-Scan Tool Suite. The new software update features a new ScanExpress TPG Cluster Wizard for logic cluster test creation, support for dynamic JTAG controller GPIO control in ScanExpress Debugger,
Corelis to Demonstrate Latest JTAG & Serial Bus Test Products at Aerospace Elect …
New Developments in JTAG/Boundary-Scan Test & Serial Bus Protocol Products on Display at Premier Aerospace Industry Event May 24-26, 2016 in Pasadena, California CERRITOS, Calif. – April 19, 2016 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, will exhibit its latest ScanExpress JTAG/Boundary-scan test software suite this May in booth 1032 at the Aerospace Electrical Systems Expo, co-located with the Space Tech Expo in Pasadena, California.

More Releases for Corelis

Corelis Introduces New Version 8.4 Boundary-Scan Tool Suite
New software update includes Cluster Wizard, Dynamic GPIO control, and new CPU support packages. Cerritos, California, December 16, 2016 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced today the availability of version 8.4 of its ScanExpress™ Boundary-Scan Tool Suite. The new software update features a new ScanExpress TPG Cluster Wizard for logic cluster test creation, support for dynamic JTAG controller GPIO control in ScanExpress Debugger,
Corelis JTAG Tools Advance Manufacturing Test for Red Lion Controls
Complete ScanExpress JTAG/boundary-scan system reduces cost and improves production test time. Cerritos, CA, October 21, 2013 – Corelis, Inc., the leading supplier of high-performance boundary-scan test and measurement tools, announced the successful deployment of Corelis ScanExpress tools at Red Lion Controls for testing Human Machine Interface (HMI) products. The combination of ScanExpress boundary-scan and JTAG Embedded Test (JET) tools enabled rapid development of fast, non-intrusive structural and early functional tests for
Corelis Adds JET Support for TI Sitara ARM Microprocessors
Non-intrusive functional test solution for high performance ARM microprocessors. Cerritos, CA, December 6, 2011 – Corelis, Inc., the leading supplier of high-performance JTAG test and measurement tools, announced today ScanExpress JET™ support for Texas Instruments Sitara™ ARM® Cortex™-A8 and ARM9™ microprocessors, specifically the AM37x, DM37x, and AM18x families. ScanExpress JTAG Embedded Test (JET) is a cutting edge test methodology providing at-speed testing of embedded processor-based electronic printed circuit boards and systems
Corelis Announces JTAG Embedded Testing for AMD Processors
Complete functional test solution for Athlon, Turion, and Opteron product families. Cerritos, CA, October 17, 2011 – Corelis, Inc., the leading supplier of high-performance JTAG test and measurement tools, announced today ScanExpress JET support for AMD embedded processors. Supported AMD processor families include Turion™ II Neo, Athlon™ II Neo, Opteron™ 4100, and Opteron™ Quad-Core (socket Fr5). These processors represent high-performance, low power processing for edge-of-enterprise markets including storage and telecommunications, as
Corelis Offers Integrated JTAG Solution with National Instruments
High Speed Digital I/O Platform Doubles as a JTAG Controller. Cerritos, CA, August 23, 2011 – Corelis, Inc. today announced support for National Instruments High Speed Digital I/O (HSDIO) instruments with Corelis’ ScanExpress suite of high-performance JTAG test and measurement tools. The marriage of National Instruments hardware with Corelis software provides a seamless path for deploying boundary-scan test and programming capabilities on existing PCI, PXI, and PXIe test platforms. Boundary-scan integration support
Corelis JET Amplifies QSC Audio Products Production Test
Corelis JTAG Embedded Test (JET) reduces test time, adds non-intrusive functional test. Cerritos, CA, May 9, 2011 – Corelis, Inc., a leading supplier of high-performance JTAG test and measurement tools, announced today the successful integration and deployment of the ScanExpress JTAG Embedded Test (JET) functional test system at the production facilities of QSC Audio Products, LLC in Costa Mesa, California. QSC, a leader and pioneer in professional audio products for over